Re: [PATCH v6 1/4] can: m_can: Create a m_can platform framework
From: Wolfgang Grandegger
Date: Mon Mar 04 2019 - 11:56:34 EST
Hello Dan,
the series already looks quite good. I still realized a few (minor)
issues while browsing the patch/code...
Am 01.03.19 um 19:50 schrieb Dan Murphy:
> Create a m_can platform framework that peripherial
> devices can register to and use common code and register sets.
> The peripherial devices may provide read/write and configuration
> support of the IP.
>
> Signed-off-by: Dan Murphy <dmurphy@xxxxxx>
> ---
>
> v6 - Squashed platform patch to this patch for bissectablity, fixed coding style
> issues, updated Kconfig help, placed mcan reg offsets back into c file, renamed
> priv->skb to priv->tx_skb and cleared perp interrupts at ISR start -
> Patch 1 comments - https://lore.kernel.org/patchwork/patch/1042446/
> Patch 2 comments - https://lore.kernel.org/patchwork/patch/1042442/
>
> drivers/net/can/m_can/Kconfig | 13 +-
> drivers/net/can/m_can/Makefile | 1 +
> drivers/net/can/m_can/m_can.c | 702 +++++++++++++------------
> drivers/net/can/m_can/m_can.h | 110 ++++
> drivers/net/can/m_can/m_can_platform.c | 198 +++++++
> 5 files changed, 681 insertions(+), 343 deletions(-)
> create mode 100644 drivers/net/can/m_can/m_can.h
> create mode 100644 drivers/net/can/m_can/m_can_platform.c
>
> diff --git a/drivers/net/can/m_can/Kconfig b/drivers/net/can/m_can/Kconfig
> index 04f20dd39007..f7119fd72df4 100644
> --- a/drivers/net/can/m_can/Kconfig
> +++ b/drivers/net/can/m_can/Kconfig
> @@ -1,5 +1,14 @@
> config CAN_M_CAN
> + tristate "Bosch M_CAN support"
> + ---help---
> + Say Y here if you want support for Bosch M_CAN controller framework.
> + This is common support for devices that embed the Bosch M_CAN IP.
> +
> +config CAN_M_CAN_PLATFORM
> + tristate "Bosch M_CAN support for io-mapped devices"
> depends on HAS_IOMEM
> - tristate "Bosch M_CAN devices"
> + depends on CAN_M_CAN
> ---help---
> - Say Y here if you want to support for Bosch M_CAN controller.
> + Say Y here if you want support for IO Mapped Bosch M_CAN controller.
> + This support is for devices that have the Bosch M_CAN controller
> + IP embedded into the device and the IP is IO Mapped to the processor.
> diff --git a/drivers/net/can/m_can/Makefile b/drivers/net/can/m_can/Makefile
> index 8bbd7f24f5be..057bbcdb3c74 100644
> --- a/drivers/net/can/m_can/Makefile
> +++ b/drivers/net/can/m_can/Makefile
> @@ -3,3 +3,4 @@
> #
>
> obj-$(CONFIG_CAN_M_CAN) += m_can.o
> +obj-$(CONFIG_CAN_M_CAN_PLATFORM) += m_can_platform.o
> diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c
> index 9b449400376b..b37d0886f9cb 100644
> --- a/drivers/net/can/m_can/m_can.c
> +++ b/drivers/net/can/m_can/m_can.c
> @@ -1,20 +1,14 @@
> -/*
> - * CAN bus driver for Bosch M_CAN controller
> - *
> - * Copyright (C) 2014 Freescale Semiconductor, Inc.
> - * Dong Aisheng <b29396@xxxxxxxxxxxxx>
> - *
> - * Bosch M_CAN user manual can be obtained from:
> +// SPDX-License-Identifier: GPL-2.0
> +// CAN bus driver for Bosch M_CAN controller
> +// Copyright (C) 2014 Freescale Semiconductor, Inc.
> +// Dong Aisheng <b29396@xxxxxxxxxxxxx>
> +// Copyright (C) 2018-19 Texas Instruments Incorporated - http://www.ti.com/
> +
> +/* Bosch M_CAN user manual can be obtained from:
> * http://www.bosch-semiconductors.de/media/pdf_1/ipmodules_1/m_can/
> * mcan_users_manual_v302.pdf
> - *
> - * This file is licensed under the terms of the GNU General Public
> - * License version 2. This program is licensed "as is" without any
> - * warranty of any kind, whether express or implied.
> */
>
> -#include <linux/clk.h>
> -#include <linux/delay.h>
> #include <linux/interrupt.h>
> #include <linux/io.h>
> #include <linux/kernel.h>
> @@ -28,11 +22,7 @@
> #include <linux/can/dev.h>
> #include <linux/pinctrl/consumer.h>
>
> -/* napi related */
> -#define M_CAN_NAPI_WEIGHT 64
> -
> -/* message ram configuration data length */
> -#define MRAM_CFG_LEN 8
> +#include "m_can.h"
>
> /* registers definition */
> enum m_can_reg {
> @@ -86,28 +76,11 @@ enum m_can_reg {
> M_CAN_TXEFA = 0xf8,
> };
>
> -/* m_can lec values */
> -enum m_can_lec_type {
> - LEC_NO_ERROR = 0,
> - LEC_STUFF_ERROR,
> - LEC_FORM_ERROR,
> - LEC_ACK_ERROR,
> - LEC_BIT1_ERROR,
> - LEC_BIT0_ERROR,
> - LEC_CRC_ERROR,
> - LEC_UNUSED,
> -};
> +/* napi related */
> +#define M_CAN_NAPI_WEIGHT 64
>
> -enum m_can_mram_cfg {
> - MRAM_SIDF = 0,
> - MRAM_XIDF,
> - MRAM_RXF0,
> - MRAM_RXF1,
> - MRAM_RXB,
> - MRAM_TXE,
> - MRAM_TXB,
> - MRAM_CFG_NUM,
> -};
> +/* message ram configuration data length */
> +#define MRAM_CFG_LEN 8
>
> /* Core Release Register (CREL) */
> #define CREL_REL_SHIFT 28
> @@ -343,77 +316,83 @@ enum m_can_mram_cfg {
> #define TX_BUF_MM_MASK (0xff << TX_BUF_MM_SHIFT)
>
> /* Tx event FIFO Element */
> -/* E1 */
I also don't understand what "E1" means... we should keep taht line anyway!
> #define TX_EVENT_MM_SHIFT TX_BUF_MM_SHIFT
> #define TX_EVENT_MM_MASK (0xff << TX_EVENT_MM_SHIFT)
>
> -/* address offset and element number for each FIFO/Buffer in the Message RAM */
> -struct mram_cfg {
> - u16 off;
> - u8 num;
> -};
> -
> -/* m_can private data structure */
> -struct m_can_priv {
> - struct can_priv can; /* must be the first member */
> - struct napi_struct napi;
> - struct net_device *dev;
> - struct device *device;
> - struct clk *hclk;
> - struct clk *cclk;
> - void __iomem *base;
> - u32 irqstatus;
> - int version;
> -
> - /* message ram configuration */
> - void __iomem *mram_base;
> - struct mram_cfg mcfg[MRAM_CFG_NUM];
> -};
> +static u32 m_can_read(struct m_can_priv *priv, enum m_can_reg reg)
> +{
> + if (priv->ops->read_reg)
> + return priv->ops->read_reg(priv, reg);
> + else
> + return -EINVAL;
> +}
>
> -static inline u32 m_can_read(const struct m_can_priv *priv, enum m_can_reg reg)
> +static int m_can_write(struct m_can_priv *priv, enum m_can_reg reg, u32 val)
> {
> - return readl(priv->base + reg);
> + if (priv->ops->write_reg)
> + return priv->ops->write_reg(priv, reg, val);
> + else
> + return -EINVAL;
> }
>
> -static inline void m_can_write(const struct m_can_priv *priv,
> - enum m_can_reg reg, u32 val)
> +static u32 m_can_fifo_read(struct m_can_priv *priv,
> + u32 fgi, unsigned int offset)
> {
> - writel(val, priv->base + reg);
> + u32 addr_offset = priv->mcfg[MRAM_RXF0].off + fgi * RXF0_ELEMENT_SIZE +
> + offset;
> +
> + if (priv->ops->read_fifo)
> + return priv->ops->read_fifo(priv, addr_offset);
> + else
> + return -EINVAL;
> }
>
> -static inline u32 m_can_fifo_read(const struct m_can_priv *priv,
> - u32 fgi, unsigned int offset)
> +static u32 m_can_fifo_write(struct m_can_priv *priv,
> + u32 fpi, unsigned int offset, u32 val)
> {
> - return readl(priv->mram_base + priv->mcfg[MRAM_RXF0].off +
> - fgi * RXF0_ELEMENT_SIZE + offset);
> + u32 addr_offset = priv->mcfg[MRAM_TXB].off + fpi * TXB_ELEMENT_SIZE +
> + offset;
> +
> + if (priv->ops->write_fifo)
> + return priv->ops->write_fifo(priv, addr_offset, val);
> + else
> + return -EINVAL;
> }
>
> -static inline void m_can_fifo_write(const struct m_can_priv *priv,
> - u32 fpi, unsigned int offset, u32 val)
> +static u32 m_can_fifo_write_no_off(struct m_can_priv *priv,
> + u32 fpi, u32 val)
> {
> - writel(val, priv->mram_base + priv->mcfg[MRAM_TXB].off +
> - fpi * TXB_ELEMENT_SIZE + offset);
> + if (priv->ops->write_fifo)
> + return priv->ops->write_fifo(priv, fpi, val);
> + else
> + return 0;
> }
>
> -static inline u32 m_can_txe_fifo_read(const struct m_can_priv *priv,
> - u32 fgi,
> - u32 offset) {
> - return readl(priv->mram_base + priv->mcfg[MRAM_TXE].off +
> - fgi * TXE_ELEMENT_SIZE + offset);
> +static u32 m_can_txe_fifo_read(struct m_can_priv *priv, u32 fgi, u32 offset)
> +{
> + u32 addr_offset = priv->mcfg[MRAM_TXE].off + fgi * TXE_ELEMENT_SIZE +
> + offset;
> +
> + if (priv->ops->read_fifo)
> + return priv->ops->read_fifo(priv, addr_offset);
> + else
> + return -EINVAL;
> }
>
> -static inline bool m_can_tx_fifo_full(const struct m_can_priv *priv)
> +static inline bool m_can_tx_fifo_full(struct m_can_priv *priv)
> {
> return !!(m_can_read(priv, M_CAN_TXFQS) & TXFQS_TFQF);
> }
>
> -static inline void m_can_config_endisable(const struct m_can_priv *priv,
> - bool enable)
> +void m_can_config_endisable(struct m_can_priv *priv, bool enable)
> {
> u32 cccr = m_can_read(priv, M_CAN_CCCR);
> u32 timeout = 10;
> u32 val = 0;
>
> + if (cccr & CCCR_CSR)
> + cccr &= ~CCCR_CSR;
> +
Is that a bug fix? Or why do we need it?
> if (enable) {
> /* enable m_can configuration */
> m_can_write(priv, M_CAN_CCCR, cccr | CCCR_INIT);
> @@ -430,7 +409,7 @@ static inline void m_can_config_endisable(const struct m_can_priv *priv,
>
> while ((m_can_read(priv, M_CAN_CCCR) & (CCCR_INIT | CCCR_CCE)) != val) {
> if (timeout == 0) {
> - netdev_warn(priv->dev, "Failed to init module\n");
> + netdev_warn(priv->net, "Failed to init module\n");
> return;
> }
> timeout--;
> @@ -438,13 +417,13 @@ static inline void m_can_config_endisable(const struct m_can_priv *priv,
> }
> }
>
> -static inline void m_can_enable_all_interrupts(const struct m_can_priv *priv)
> +static inline void m_can_enable_all_interrupts(struct m_can_priv *priv)
> {
> /* Only interrupt line 0 is used in this driver */
> m_can_write(priv, M_CAN_ILE, ILE_EINT0);
> }
>
> -static inline void m_can_disable_all_interrupts(const struct m_can_priv *priv)
> +static inline void m_can_disable_all_interrupts(struct m_can_priv *priv)
> {
> m_can_write(priv, M_CAN_ILE, 0x0);
> }
> @@ -633,9 +612,12 @@ static int m_can_clk_start(struct m_can_priv *priv)
> {
> int err;
>
> - err = pm_runtime_get_sync(priv->device);
> + if (priv->pm_clock_support == 0)
> + return 0;
> +
> + err = pm_runtime_get_sync(priv->dev);
> if (err < 0) {
> - pm_runtime_put_noidle(priv->device);
> + pm_runtime_put_noidle(priv->dev);
> return err;
> }
>
> @@ -644,7 +626,8 @@ static int m_can_clk_start(struct m_can_priv *priv)
>
> static void m_can_clk_stop(struct m_can_priv *priv)
> {
> - pm_runtime_put_sync(priv->device);
> + if (priv->pm_clock_support)
> + pm_runtime_put_sync(priv->dev);
> }
>
> static int m_can_get_berr_counter(const struct net_device *dev,
> @@ -811,9 +794,8 @@ static int m_can_handle_bus_errors(struct net_device *dev, u32 irqstatus,
> return work_done;
> }
>
> -static int m_can_poll(struct napi_struct *napi, int quota)
> +static int m_can_rx_handler(struct net_device *dev, int quota)
> {
> - struct net_device *dev = napi->dev;
> struct m_can_priv *priv = netdev_priv(dev);
> int work_done = 0;
> u32 irqstatus, psr;
> @@ -831,13 +813,33 @@ static int m_can_poll(struct napi_struct *napi, int quota)
>
> if (irqstatus & IR_RF0N)
> work_done += m_can_do_rx_poll(dev, (quota - work_done));
> +end:
> + return work_done;
> +}
> +
> +static int m_can_rx_peripherial(struct net_device *dev)
> +{
> + struct m_can_priv *priv = netdev_priv(dev);
> +
> + m_can_rx_handler(dev, 1);
> +
> + m_can_enable_all_interrupts(priv);
> +
> + return 0;
> +}
> +
> +static int m_can_poll(struct napi_struct *napi, int quota)
> +{
> + struct net_device *dev = napi->dev;
> + struct m_can_priv *priv = netdev_priv(dev);
> + int work_done;
>
> + work_done = m_can_rx_handler(dev, quota);
> if (work_done < quota) {
> napi_complete_done(napi, work_done);
> m_can_enable_all_interrupts(priv);
> }
>
> -end:
> return work_done;
> }
>
> @@ -894,6 +896,9 @@ static irqreturn_t m_can_isr(int irq, void *dev_id)
> if (ir & IR_ALL_INT)
> m_can_write(priv, M_CAN_IR, ir);
>
> + if (priv->ops->clr_dev_interrupts)
> + priv->ops->clr_dev_interrupts(priv);
> +
> /* schedule NAPI in case of
> * - rx IRQ
> * - state change IRQ
> @@ -902,7 +907,10 @@ static irqreturn_t m_can_isr(int irq, void *dev_id)
> if ((ir & IR_RF0N) || (ir & IR_ERR_ALL_30X)) {
> priv->irqstatus = ir;
> m_can_disable_all_interrupts(priv);
> - napi_schedule(&priv->napi);
> + if (!priv->is_peripherial)
> + napi_schedule(&priv->napi);
> + else
> + m_can_rx_peripherial(dev);
> }
>
> if (priv->version == 30) {
> @@ -1155,6 +1163,9 @@ static void m_can_chip_config(struct net_device *dev)
> m_can_set_bittiming(dev);
>
> m_can_config_endisable(priv, false);
> +
> + if (priv->ops->device_init)
> + priv->ops->device_init(priv);
> }
>
> static void m_can_start(struct net_device *dev)
> @@ -1188,20 +1199,17 @@ static int m_can_set_mode(struct net_device *dev, enum can_mode mode)
> * else it returns the release and step coded as:
> * return value = 10 * <release> + 1 * <step>
> */
> -static int m_can_check_core_release(void __iomem *m_can_base)
> +static int m_can_check_core_release(struct m_can_priv *priv)
> {
> u32 crel_reg;
> u8 rel;
> u8 step;
> int res;
> - struct m_can_priv temp_priv = {
> - .base = m_can_base
> - };
>
> /* Read Core Release Version and split into version number
> * Example: Version 3.2.1 => rel = 3; step = 2; substep = 1;
> */
> - crel_reg = m_can_read(&temp_priv, M_CAN_CREL);
> + crel_reg = m_can_read(priv, M_CAN_CREL);
> rel = (u8)((crel_reg & CREL_REL_MASK) >> CREL_REL_SHIFT);
> step = (u8)((crel_reg & CREL_STEP_MASK) >> CREL_STEP_SHIFT);
>
> @@ -1219,18 +1227,26 @@ static int m_can_check_core_release(void __iomem *m_can_base)
> /* Selectable Non ISO support only in version 3.2.x
> * This function checks if the bit is writable.
> */
> -static bool m_can_niso_supported(const struct m_can_priv *priv)
> +static bool m_can_niso_supported(struct m_can_priv *priv)
> {
> - u32 cccr_reg, cccr_poll;
> - int niso_timeout;
> + u32 cccr_reg, cccr_poll = 0;
> + int niso_timeout = -ETIMEDOUT;
> + int i;
>
> m_can_config_endisable(priv, true);
> cccr_reg = m_can_read(priv, M_CAN_CCCR);
> cccr_reg |= CCCR_NISO;
> m_can_write(priv, M_CAN_CCCR, cccr_reg);
>
> - niso_timeout = readl_poll_timeout((priv->base + M_CAN_CCCR), cccr_poll,
> - (cccr_poll == cccr_reg), 0, 10);
> + for (i = 0; i <= 10; i++) {
> + cccr_poll = m_can_read(priv, M_CAN_CCCR);
> + if (cccr_poll == cccr_reg) {
> + niso_timeout = 0;
> + break;
> + }
> +
> + usleep_range(1, 5);
> + }
>
> /* Clear NISO */
> cccr_reg &= ~(CCCR_NISO);
> @@ -1242,107 +1258,95 @@ static bool m_can_niso_supported(const struct m_can_priv *priv)
> return !niso_timeout;
> }
>
> -static int m_can_dev_setup(struct platform_device *pdev, struct net_device *dev,
> - void __iomem *addr)
> +static int m_can_dev_setup(struct m_can_priv *m_can_dev)
> {
> - struct m_can_priv *priv;
> + struct net_device *dev = m_can_dev->net;
> int m_can_version;
>
> - m_can_version = m_can_check_core_release(addr);
> + m_can_version = m_can_check_core_release(m_can_dev);
> /* return if unsupported version */
> if (!m_can_version) {
> - dev_err(&pdev->dev, "Unsupported version number: %2d",
> + dev_err(m_can_dev->dev, "Unsupported version number: %2d",
> m_can_version);
> return -EINVAL;
> }
>
> - priv = netdev_priv(dev);
> - netif_napi_add(dev, &priv->napi, m_can_poll, M_CAN_NAPI_WEIGHT);
> + if (!m_can_dev->is_peripherial)
> + netif_napi_add(dev, &m_can_dev->napi,
> + m_can_poll, M_CAN_NAPI_WEIGHT);
>
> /* Shared properties of all M_CAN versions */
> - priv->version = m_can_version;
> - priv->dev = dev;
> - priv->base = addr;
> - priv->can.do_set_mode = m_can_set_mode;
> - priv->can.do_get_berr_counter = m_can_get_berr_counter;
> + m_can_dev->version = m_can_version;
> + m_can_dev->can.do_set_mode = m_can_set_mode;
> + m_can_dev->can.do_get_berr_counter = m_can_get_berr_counter;
>
> /* Set M_CAN supported operations */
> - priv->can.ctrlmode_supported = CAN_CTRLMODE_LOOPBACK |
> + m_can_dev->can.ctrlmode_supported = CAN_CTRLMODE_LOOPBACK |
> CAN_CTRLMODE_LISTENONLY |
> CAN_CTRLMODE_BERR_REPORTING |
> CAN_CTRLMODE_FD;
>
> /* Set properties depending on M_CAN version */
> - switch (priv->version) {
> + switch (m_can_dev->version) {
> case 30:
> /* CAN_CTRLMODE_FD_NON_ISO is fixed with M_CAN IP v3.0.x */
> can_set_static_ctrlmode(dev, CAN_CTRLMODE_FD_NON_ISO);
> - priv->can.bittiming_const = &m_can_bittiming_const_30X;
> - priv->can.data_bittiming_const =
> + if (m_can_dev->bit_timing)
> + m_can_dev->can.bittiming_const = m_can_dev->bit_timing;
> + else
> + m_can_dev->can.bittiming_const =
> + &m_can_bittiming_const_30X;
m_can_dev->can.bittiming_const = m_can_dev->bit_timing ?
m_can_dev->bit_timing : &m_can_bittiming_const_30X;
Is more compact. Here and below.
> + if (m_can_dev->data_timing)
> + m_can_dev->can.data_bittiming_const =
> + m_can_dev->data_timing;
> + else
> + m_can_dev->can.data_bittiming_const =
> &m_can_data_bittiming_const_30X;
> break;
> case 31:
> /* CAN_CTRLMODE_FD_NON_ISO is fixed with M_CAN IP v3.1.x */
> can_set_static_ctrlmode(dev, CAN_CTRLMODE_FD_NON_ISO);
> - priv->can.bittiming_const = &m_can_bittiming_const_31X;
> - priv->can.data_bittiming_const =
> + if (m_can_dev->bit_timing)
> + m_can_dev->can.bittiming_const = m_can_dev->bit_timing;
> + else
> + m_can_dev->can.bittiming_const =
> + &m_can_bittiming_const_31X;
> + if (m_can_dev->data_timing)
> + m_can_dev->can.data_bittiming_const =
> + m_can_dev->data_timing;
> + else
> + m_can_dev->can.data_bittiming_const =
> &m_can_data_bittiming_const_31X;
> break;
> case 32:
> - priv->can.bittiming_const = &m_can_bittiming_const_31X;
> - priv->can.data_bittiming_const =
> + if (m_can_dev->bit_timing)
> + m_can_dev->can.bittiming_const = m_can_dev->bit_timing;
> + else
> + m_can_dev->can.bittiming_const =
> + &m_can_bittiming_const_31X;
> +
> + if (m_can_dev->data_timing)
> + m_can_dev->can.data_bittiming_const =
> + m_can_dev->data_timing;
> + else
> + m_can_dev->can.data_bittiming_const =
> &m_can_data_bittiming_const_31X;
> - priv->can.ctrlmode_supported |= (m_can_niso_supported(priv)
> +
> + m_can_dev->can.ctrlmode_supported |=
> + (m_can_niso_supported(m_can_dev)
> ? CAN_CTRLMODE_FD_NON_ISO
> : 0);
> break;
> default:
> - dev_err(&pdev->dev, "Unsupported version number: %2d",
> - priv->version);
> + dev_err(m_can_dev->dev, "Unsupported version number: %2d",
> + m_can_dev->version);
> return -EINVAL;
> }
>
> - return 0;
> -}
> -
> -static int m_can_open(struct net_device *dev)
> -{
> - struct m_can_priv *priv = netdev_priv(dev);
> - int err;
> -
> - err = m_can_clk_start(priv);
> - if (err)
> - return err;
> -
> - /* open the can device */
> - err = open_candev(dev);
> - if (err) {
> - netdev_err(dev, "failed to open can device\n");
> - goto exit_disable_clks;
> - }
> -
> - /* register interrupt handler */
> - err = request_irq(dev->irq, m_can_isr, IRQF_SHARED, dev->name,
> - dev);
> - if (err < 0) {
> - netdev_err(dev, "failed to request interrupt\n");
> - goto exit_irq_fail;
> - }
> -
> - /* start the m_can controller */
> - m_can_start(dev);
> -
> - can_led_event(dev, CAN_LED_EVENT_OPEN);
> - napi_enable(&priv->napi);
> - netif_start_queue(dev);
> + if (m_can_dev->ops->device_init)
> + m_can_dev->ops->device_init(m_can_dev);
>
> return 0;
> -
> -exit_irq_fail:
> - close_candev(dev);
> -exit_disable_clks:
> - m_can_clk_stop(priv);
> - return err;
> }
>
> static void m_can_stop(struct net_device *dev)
> @@ -1361,10 +1365,17 @@ static int m_can_close(struct net_device *dev)
> struct m_can_priv *priv = netdev_priv(dev);
>
> netif_stop_queue(dev);
> - napi_disable(&priv->napi);
> + if (!priv->is_peripherial)
> + napi_disable(&priv->napi);
> m_can_stop(dev);
> m_can_clk_stop(priv);
> free_irq(dev->irq, dev);
> +
> + if (priv->is_peripherial) {
> + destroy_workqueue(priv->wq);
> + priv->wq = NULL;
Could you pease use the name "priv->tx_wq".
> + }
> +
> close_candev(dev);
> can_led_event(dev, CAN_LED_EVENT_STOP);
>
> @@ -1385,18 +1396,15 @@ static int m_can_next_echo_skb_occupied(struct net_device *dev, int putidx)
> return !!priv->can.echo_skb[next_idx];
> }
>
> -static netdev_tx_t m_can_start_xmit(struct sk_buff *skb,
> - struct net_device *dev)
> +static void m_can_tx_handler(struct m_can_priv *priv)
> {
> - struct m_can_priv *priv = netdev_priv(dev);
> - struct canfd_frame *cf = (struct canfd_frame *)skb->data;
> + struct canfd_frame *cf = (struct canfd_frame *)priv->tx_skb->data;
> + struct net_device *dev = priv->net;
> + struct sk_buff *skb = priv->tx_skb;
> u32 id, cccr, fdflags;
> int i;
> int putidx;
>
> - if (can_dropped_invalid_skb(dev, skb))
> - return NETDEV_TX_OK;
> -
> /* Generate ID field for TX buffer Element */
> /* Common to all supported M_CAN versions */
> if (cf->can_id & CAN_EFF_FLAG) {
> @@ -1451,7 +1459,7 @@ static netdev_tx_t m_can_start_xmit(struct sk_buff *skb,
> netif_stop_queue(dev);
> netdev_warn(dev,
> "TX queue active although FIFO is full.");
> - return NETDEV_TX_BUSY;
> + return;
m_can_start_xmit() doesn't return NETDEV_TX_BUSY but NETDEV_TX_OK and
the queue is stopped! Also the skb is not freed! The code states
"/* This shouldn't happen */" but then it just prints a warning. Did
you see that message?
> }
>
> /* get put index for frame */
> @@ -1492,14 +1500,100 @@ static netdev_tx_t m_can_start_xmit(struct sk_buff *skb,
> m_can_write(priv, M_CAN_TXBAR, (1 << putidx));
>
> /* stop network queue if fifo full */
> - if (m_can_tx_fifo_full(priv) ||
> - m_can_next_echo_skb_occupied(dev, putidx))
> - netif_stop_queue(dev);
> + if (m_can_tx_fifo_full(priv) ||
> + m_can_next_echo_skb_occupied(dev, putidx))
> + netif_stop_queue(dev);
> + }
> +}
> +
> +static void m_can_tx_work_queue(struct work_struct *ws)
> +{
> + struct m_can_priv *priv = container_of(ws, struct m_can_priv,
> + tx_work);
> + m_can_tx_handler(priv);
> +}
> +
> +static netdev_tx_t m_can_start_xmit(struct sk_buff *skb,
> + struct net_device *dev)
> +{
> + struct m_can_priv *priv = netdev_priv(dev);
> +
> + if (can_dropped_invalid_skb(dev, skb))
> + return NETDEV_TX_OK;
> +
> + priv->tx_skb = skb;
> + if (priv->is_peripherial) {
> + netif_stop_queue(priv->net);
> + queue_work(priv->wq, &priv->tx_work);
> + } else {
> + m_can_tx_handler(priv);
> }
>
> return NETDEV_TX_OK;
> }
>
> +static int m_can_open(struct net_device *dev)
> +{
> + struct m_can_priv *priv = netdev_priv(dev);
> + int err;
> +
> + err = m_can_clk_start(priv);
> + if (err)
> + return err;
> +
> + /* open the can device */
> + err = open_candev(dev);
> + if (err) {
> + netdev_err(dev, "failed to open can device\n");
> + goto exit_disable_clks;
> + }
> +
> + /* register interrupt handler */
> + if (priv->is_peripherial) {
> + priv->wq = alloc_workqueue("mcan_wq",
> + WQ_FREEZABLE | WQ_MEM_RECLAIM, 0);
> + if (!priv->wq) {
> + err = -ENOMEM;
> + goto out_wq_fail;
> + }
> +
> + INIT_WORK(&priv->tx_work, m_can_tx_work_queue);
> +
> + err = request_threaded_irq(dev->irq, NULL, m_can_isr,
> + IRQF_ONESHOT | IRQF_TRIGGER_FALLING,
> + dev->name, dev);
> + } else {
> + err = request_irq(dev->irq, m_can_isr, IRQF_SHARED, dev->name,
> + dev);
> + }
> +
> + if (err < 0) {
> + netdev_err(dev, "failed to request interrupt\n");
> + goto exit_irq_fail;
> + }
> +
> + /* start the m_can controller */
> + m_can_start(dev);
> +
> + can_led_event(dev, CAN_LED_EVENT_OPEN);
> +
> + if (!priv->is_peripherial)
> + napi_enable(&priv->napi);
> +
> + netif_start_queue(dev);
> +
> + return 0;
> +
> +exit_irq_fail:
> + if (priv->is_peripherial)
> + destroy_workqueue(priv->wq);
> +out_wq_fail:
> + close_candev(dev);
> +exit_disable_clks:
> + m_can_clk_stop(priv);
> + return err;
> +}
> +
> static const struct net_device_ops m_can_netdev_ops = {
> .ndo_open = m_can_open,
> .ndo_stop = m_can_close,
> @@ -1515,20 +1609,6 @@ static int register_m_can_dev(struct net_device *dev)
> return register_candev(dev);
> }
>
> -static void m_can_init_ram(struct m_can_priv *priv)
> -{
> - int end, i, start;
> -
> - /* initialize the entire Message RAM in use to avoid possible
> - * ECC/parity checksum errors when reading an uninitialized buffer
> - */
> - start = priv->mcfg[MRAM_SIDF].off;
> - end = priv->mcfg[MRAM_TXB].off +
> - priv->mcfg[MRAM_TXB].num * TXB_ELEMENT_SIZE;
> - for (i = start; i < end; i += 4)
> - writel(0x0, priv->mram_base + i);
> -}
> -
> static void m_can_of_parse_mram(struct m_can_priv *priv,
> const u32 *mram_config_vals)
> {
> @@ -1556,9 +1636,8 @@ static void m_can_of_parse_mram(struct m_can_priv *priv,
> priv->mcfg[MRAM_TXB].num = mram_config_vals[7] &
> (TXBC_NDTB_MASK >> TXBC_NDTB_SHIFT);
>
> - dev_dbg(priv->device,
> - "mram_base %p sidf 0x%x %d xidf 0x%x %d rxf0 0x%x %d rxf1 0x%x %d rxb 0x%x %d txe 0x%x %d txb 0x%x %d\n",
> - priv->mram_base,
> + dev_dbg(priv->dev,
> + "sidf 0x%x %d xidf 0x%x %d rxf0 0x%x %d rxf1 0x%x %d rxb 0x%x %d txe 0x%x %d txb 0x%x %d\n",
> priv->mcfg[MRAM_SIDF].off, priv->mcfg[MRAM_SIDF].num,
> priv->mcfg[MRAM_XIDF].off, priv->mcfg[MRAM_XIDF].num,
> priv->mcfg[MRAM_RXF0].off, priv->mcfg[MRAM_RXF0].num,
> @@ -1566,63 +1645,55 @@ static void m_can_of_parse_mram(struct m_can_priv *priv,
> priv->mcfg[MRAM_RXB].off, priv->mcfg[MRAM_RXB].num,
> priv->mcfg[MRAM_TXE].off, priv->mcfg[MRAM_TXE].num,
> priv->mcfg[MRAM_TXB].off, priv->mcfg[MRAM_TXB].num);
> -
> - m_can_init_ram(priv);
> }
>
> -static int m_can_plat_probe(struct platform_device *pdev)
> +void m_can_init_ram(struct m_can_priv *priv)
> {
> - struct net_device *dev;
> - struct m_can_priv *priv;
> - struct resource *res;
> - void __iomem *addr;
> - void __iomem *mram_addr;
> - struct clk *hclk, *cclk;
> - int irq, ret;
> - struct device_node *np;
> - u32 mram_config_vals[MRAM_CFG_LEN];
> - u32 tx_fifo_size;
> -
> - np = pdev->dev.of_node;
> + int end, i, start;
>
> - hclk = devm_clk_get(&pdev->dev, "hclk");
> - cclk = devm_clk_get(&pdev->dev, "cclk");
> + /* initialize the entire Message RAM in use to avoid possible
> + * ECC/parity checksum errors when reading an uninitialized buffer
> + */
> + start = priv->mcfg[MRAM_SIDF].off;
> + end = priv->mcfg[MRAM_TXB].off +
> + priv->mcfg[MRAM_TXB].num * TXB_ELEMENT_SIZE;
>
> - if (IS_ERR(hclk) || IS_ERR(cclk)) {
> - dev_err(&pdev->dev, "no clock found\n");
> - ret = -ENODEV;
> - goto failed_ret;
> - }
> + for (i = start; i < end; i += 4)
> + m_can_fifo_write_no_off(priv, i, 0x0);
> +}
> +EXPORT_SYMBOL_GPL(m_can_init_ram);
>
> - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "m_can");
> - addr = devm_ioremap_resource(&pdev->dev, res);
> - irq = platform_get_irq_byname(pdev, "int0");
> +int m_can_class_get_clocks(struct m_can_priv *m_can_dev)
> +{
> + int ret = 0;
>
> - if (IS_ERR(addr) || irq < 0) {
> - ret = -EINVAL;
> - goto failed_ret;
> - }
> + m_can_dev->hclk = devm_clk_get(m_can_dev->dev, "hclk");
> + m_can_dev->cclk = devm_clk_get(m_can_dev->dev, "cclk");
>
> - /* message ram could be shared */
> - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "message_ram");
> - if (!res) {
> + if (IS_ERR(m_can_dev->cclk)) {
> + dev_err(m_can_dev->dev, "no clock found\n");
> ret = -ENODEV;
> - goto failed_ret;
> }
>
> - mram_addr = devm_ioremap(&pdev->dev, res->start, resource_size(res));
> - if (!mram_addr) {
> - ret = -ENOMEM;
> - goto failed_ret;
> - }
> + return ret;
> +}
> +EXPORT_SYMBOL_GPL(m_can_class_get_clocks);
>
> - /* get message ram configuration */
> - ret = of_property_read_u32_array(np, "bosch,mram-cfg",
> - mram_config_vals,
> - sizeof(mram_config_vals) / 4);
> +struct m_can_priv *m_can_class_allocate_dev(struct device *dev)
> +{
> + struct m_can_priv *class_dev = NULL;
> + u32 mram_config_vals[MRAM_CFG_LEN];
> + struct net_device *net_dev;
> + u32 tx_fifo_size;
> + int ret;
> +
> + ret = fwnode_property_read_u32_array(dev_fwnode(dev),
> + "bosch,mram-cfg",
> + mram_config_vals,
> + sizeof(mram_config_vals) / 4);
> if (ret) {
> - dev_err(&pdev->dev, "Could not get Message RAM configuration.");
> - goto failed_ret;
> + dev_err(dev, "Could not get Message RAM configuration.");
> + goto out;
> }
>
> /* Get TX FIFO size
> @@ -1631,66 +1702,74 @@ static int m_can_plat_probe(struct platform_device *pdev)
> tx_fifo_size = mram_config_vals[7];
>
> /* allocate the m_can device */
> - dev = alloc_candev(sizeof(*priv), tx_fifo_size);
> - if (!dev) {
> - ret = -ENOMEM;
> - goto failed_ret;
> + net_dev = alloc_candev(sizeof(*class_dev), tx_fifo_size);
> + if (!net_dev) {
> + dev_err(dev, "Failed to allocate CAN device");
> + goto out;
> }
>
> - priv = netdev_priv(dev);
> - dev->irq = irq;
> - priv->device = &pdev->dev;
> - priv->hclk = hclk;
> - priv->cclk = cclk;
> - priv->can.clock.freq = clk_get_rate(cclk);
> - priv->mram_base = mram_addr;
> + class_dev = netdev_priv(net_dev);
> + if (!class_dev) {
> + dev_err(dev, "Failed to init netdev private");
> + goto out;
> + }
>
> - platform_set_drvdata(pdev, dev);
> - SET_NETDEV_DEV(dev, &pdev->dev);
> + class_dev->net = net_dev;
> + class_dev->dev = dev;
> + SET_NETDEV_DEV(net_dev, dev);
>
> - /* Enable clocks. Necessary to read Core Release in order to determine
> - * M_CAN version
> - */
> - pm_runtime_enable(&pdev->dev);
> - ret = m_can_clk_start(priv);
> - if (ret)
> - goto pm_runtime_fail;
> + m_can_of_parse_mram(class_dev, mram_config_vals);
> +out:
> + return class_dev;
> +}
> +EXPORT_SYMBOL_GPL(m_can_class_allocate_dev);
> +
> +int m_can_class_register(struct m_can_priv *m_can_dev)
> +{
> + int ret;
>
> - ret = m_can_dev_setup(pdev, dev, addr);
> + if (m_can_dev->pm_clock_support) {
> + pm_runtime_enable(m_can_dev->dev);
> + ret = m_can_clk_start(m_can_dev);
> + if (ret)
> + goto pm_runtime_fail;
> + }
> +
> + ret = m_can_dev_setup(m_can_dev);
> if (ret)
> goto clk_disable;
>
> - ret = register_m_can_dev(dev);
> + ret = register_m_can_dev(m_can_dev->net);
> if (ret) {
> - dev_err(&pdev->dev, "registering %s failed (err=%d)\n",
> - KBUILD_MODNAME, ret);
> + dev_err(m_can_dev->dev, "registering %s failed (err=%d)\n",
> + m_can_dev->net->name, ret);
> goto clk_disable;
> }
>
> - m_can_of_parse_mram(priv, mram_config_vals);
> -
> - devm_can_led_init(dev);
> + devm_can_led_init(m_can_dev->net);
>
> - of_can_transceiver(dev);
> + of_can_transceiver(m_can_dev->net);
>
> - dev_info(&pdev->dev, "%s device registered (irq=%d, version=%d)\n",
> - KBUILD_MODNAME, dev->irq, priv->version);
> + dev_info(m_can_dev->dev, "%s device registered (irq=%d, version=%d)\n",
> + KBUILD_MODNAME, m_can_dev->net->irq, m_can_dev->version);
>
> /* Probe finished
> * Stop clocks. They will be reactivated once the M_CAN device is opened
> */
> clk_disable:
> - m_can_clk_stop(priv);
> + m_can_clk_stop(m_can_dev);
> pm_runtime_fail:
> if (ret) {
> - pm_runtime_disable(&pdev->dev);
> - free_candev(dev);
> + if (m_can_dev->pm_clock_support)
> + pm_runtime_disable(m_can_dev->dev);
> + free_candev(m_can_dev->net);
> }
> -failed_ret:
> +
> return ret;
> }
> +EXPORT_SYMBOL_GPL(m_can_class_register);
>
> -static __maybe_unused int m_can_suspend(struct device *dev)
> +int m_can_class_suspend(struct device *dev)
> {
> struct net_device *ndev = dev_get_drvdata(dev);
> struct m_can_priv *priv = netdev_priv(ndev);
> @@ -1708,8 +1787,9 @@ static __maybe_unused int m_can_suspend(struct device *dev)
>
> return 0;
> }
> +EXPORT_SYMBOL_GPL(m_can_class_suspend);
>
> -static __maybe_unused int m_can_resume(struct device *dev)
> +int m_can_class_resume(struct device *dev)
> {
> struct net_device *ndev = dev_get_drvdata(dev);
> struct m_can_priv *priv = netdev_priv(ndev);
> @@ -1733,79 +1813,19 @@ static __maybe_unused int m_can_resume(struct device *dev)
>
> return 0;
> }
> +EXPORT_SYMBOL_GPL(m_can_class_resume);
>
> -static void unregister_m_can_dev(struct net_device *dev)
> +void m_can_class_unregister(struct m_can_priv *m_can_dev)
> {
> - unregister_candev(dev);
> -}
> + unregister_candev(m_can_dev->net);
>
> -static int m_can_plat_remove(struct platform_device *pdev)
> -{
> - struct net_device *dev = platform_get_drvdata(pdev);
> + m_can_clk_stop(m_can_dev);
>
> - unregister_m_can_dev(dev);
> -
> - pm_runtime_disable(&pdev->dev);
> -
> - platform_set_drvdata(pdev, NULL);
> -
> - free_candev(dev);
> -
> - return 0;
> -}
> -
> -static int __maybe_unused m_can_runtime_suspend(struct device *dev)
> -{
> - struct net_device *ndev = dev_get_drvdata(dev);
> - struct m_can_priv *priv = netdev_priv(ndev);
> -
> - clk_disable_unprepare(priv->cclk);
> - clk_disable_unprepare(priv->hclk);
> -
> - return 0;
> -}
> -
> -static int __maybe_unused m_can_runtime_resume(struct device *dev)
> -{
> - struct net_device *ndev = dev_get_drvdata(dev);
> - struct m_can_priv *priv = netdev_priv(ndev);
> - int err;
> -
> - err = clk_prepare_enable(priv->hclk);
> - if (err)
> - return err;
> -
> - err = clk_prepare_enable(priv->cclk);
> - if (err)
> - clk_disable_unprepare(priv->hclk);
> -
> - return err;
> + free_candev(m_can_dev->net);
> }
> -
> -static const struct dev_pm_ops m_can_pmops = {
> - SET_RUNTIME_PM_OPS(m_can_runtime_suspend,
> - m_can_runtime_resume, NULL)
> - SET_SYSTEM_SLEEP_PM_OPS(m_can_suspend, m_can_resume)
> -};
> -
> -static const struct of_device_id m_can_of_table[] = {
> - { .compatible = "bosch,m_can", .data = NULL },
> - { /* sentinel */ },
> -};
> -MODULE_DEVICE_TABLE(of, m_can_of_table);
> -
> -static struct platform_driver m_can_plat_driver = {
> - .driver = {
> - .name = KBUILD_MODNAME,
> - .of_match_table = m_can_of_table,
> - .pm = &m_can_pmops,
> - },
> - .probe = m_can_plat_probe,
> - .remove = m_can_plat_remove,
> -};
> -
> -module_platform_driver(m_can_plat_driver);
> +EXPORT_SYMBOL_GPL(m_can_class_unregister);
>
> MODULE_AUTHOR("Dong Aisheng <b29396@xxxxxxxxxxxxx>");
> +MODULE_AUTHOR("Dan Murphy <dmurphy@xxxxxx>");
> MODULE_LICENSE("GPL v2");
> MODULE_DESCRIPTION("CAN bus driver for Bosch M_CAN controller");
> diff --git a/drivers/net/can/m_can/m_can.h b/drivers/net/can/m_can/m_can.h
> new file mode 100644
> index 000000000000..70ab7bba063d
> --- /dev/null
> +++ b/drivers/net/can/m_can/m_can.h
> @@ -0,0 +1,110 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/* CAN bus driver for Bosch M_CAN controller
> + * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
> + */
> +
> +#ifndef _CAN_M_CAN_H_
> +#define _CAN_M_CAN_H_
> +
> +#include <linux/can/core.h>
> +#include <linux/can/led.h>
> +#include <linux/completion.h>
> +#include <linux/device.h>
> +#include <linux/dma-mapping.h>
> +#include <linux/freezer.h>
> +#include <linux/slab.h>
> +#include <linux/uaccess.h>
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/interrupt.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/netdevice.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/iopoll.h>
> +#include <linux/can/dev.h>
> +#include <linux/pinctrl/consumer.h>
> +
> +/* m_can lec values */
> +enum m_can_lec_type {
> + LEC_NO_ERROR = 0,
> + LEC_STUFF_ERROR,
> + LEC_FORM_ERROR,
> + LEC_ACK_ERROR,
> + LEC_BIT1_ERROR,
> + LEC_BIT0_ERROR,
> + LEC_CRC_ERROR,
> + LEC_UNUSED,
> +};
> +
> +enum m_can_mram_cfg {
> + MRAM_SIDF = 0,
> + MRAM_XIDF,
> + MRAM_RXF0,
> + MRAM_RXF1,
> + MRAM_RXB,
> + MRAM_TXE,
> + MRAM_TXB,
> + MRAM_CFG_NUM,
> +};
> +
> +/* address offset and element number for each FIFO/Buffer in the Message RAM */
> +struct mram_cfg {
> + u16 off;
> + u8 num;
> +};
> +
> +struct m_can_priv;
> +struct m_can_ops {
> + /* Device specific call backs */
> + int (*clr_dev_interrupts)(struct m_can_priv *m_can_class);
Why not just "clear_interrupt"... to be consistant with the names below.
> + u32 (*read_reg)(struct m_can_priv *m_can_class, int reg);
> + int (*write_reg)(struct m_can_priv *m_can_class, int reg, int val);
> + u32 (*read_fifo)(struct m_can_priv *m_can_class, int addr_offset);
> + int (*write_fifo)(struct m_can_priv *m_can_class, int addr_offset,
> + int val);
> + int (*device_init)(struct m_can_priv *m_can_class);
> +};
> +
> +struct m_can_priv {
> + struct can_priv can;
> + struct napi_struct napi;
> + struct net_device *net;
> + struct device *dev;
> + struct clk *hclk;
> + struct clk *cclk;
> +
> + struct workqueue_struct *wq;
s/wq/tx_wq/ as already suggested above.
> + struct work_struct tx_work;
> + struct sk_buff *tx_skb;
> +
> + struct can_bittiming_const *bit_timing;
> + struct can_bittiming_const *data_timing;
> +
> + struct m_can_ops *ops;
> +
> + void *device_data;
> +
> + int version;
> + int freq;
> + u32 irqstatus;
> +
> + int pm_clock_support;
A "bool" would be more appropriate, I think.
> + int is_peripherial;
> +
> + struct mram_cfg mcfg[MRAM_CFG_NUM];
> +};
> +
> +struct m_can_priv *m_can_class_allocate_dev(struct device *dev);
> +int m_can_class_register(struct m_can_priv *m_can_dev);
> +void m_can_class_unregister(struct m_can_priv *m_can_dev);
> +int m_can_class_get_clocks(struct m_can_priv *m_can_dev);
> +void m_can_init_ram(struct m_can_priv *priv);
> +void m_can_config_endisable(struct m_can_priv *priv, bool enable);
> +
> +int m_can_class_suspend(struct device *dev);
> +int m_can_class_resume(struct device *dev);
> +#endif /* _CAN_M_H_ */
> diff --git a/drivers/net/can/m_can/m_can_platform.c b/drivers/net/can/m_can/m_can_platform.c
> new file mode 100644
> index 000000000000..92d989ce032a
> --- /dev/null
> +++ b/drivers/net/can/m_can/m_can_platform.c
> @@ -0,0 +1,198 @@
> +// SPDX-License-Identifier: GPL-2.0
> +// IOMapped CAN bus driver for Bosch M_CAN controller
> +// Copyright (C) 2014 Freescale Semiconductor, Inc.
> +// Dong Aisheng <b29396@xxxxxxxxxxxxx>
> +//
> +// Copyright (C) 2018-19 Texas Instruments Incorporated - http://www.ti.com/
> +
> +#include <linux/platform_device.h>
> +
> +#include "m_can.h"
> +
> +struct m_can_plat_priv {
> + void __iomem *base;
> + void __iomem *mram_base;
> +};
> +
> +static u32 iomap_read_reg(struct m_can_priv *m_can_class, int reg)
> +{
> + struct m_can_plat_priv *priv = (struct m_can_plat_priv *)m_can_class->device_data;
> +
> + return readl(priv->base + reg);
> +}
> +
> +static u32 iomap_read_fifo(struct m_can_priv *m_can_class, int offset)
> +{
> + struct m_can_plat_priv *priv = (struct m_can_plat_priv *)m_can_class->device_data;
> +
> + return readl(priv->mram_base + offset);
> +}
> +
> +static int iomap_write_reg(struct m_can_priv *m_can_class, int reg, int val)
> +{
> + struct m_can_plat_priv *priv = (struct m_can_plat_priv *)m_can_class->device_data;
> +
> + writel(val, priv->base + reg);
> +
> + return 0;
> +}
> +
> +static int iomap_write_fifo(struct m_can_priv *m_can_class, int offset, int val)
> +{
> + struct m_can_plat_priv *priv = (struct m_can_plat_priv *)m_can_class->device_data;
> +
> + writel(val, priv->mram_base + offset);
> +
> + return 0;
> +}
> +
> +static struct m_can_ops m_can_plat_ops = {
> + .read_reg = iomap_read_reg,
> + .write_reg = iomap_write_reg,
> + .write_fifo = iomap_write_fifo,
> + .read_fifo = iomap_read_fifo,
> +};
> +
> +static int m_can_plat_probe(struct platform_device *pdev)
> +{
> + struct m_can_priv *mcan_class;
> + struct m_can_plat_priv *priv;
> + struct resource *res;
> + void __iomem *addr;
> + void __iomem *mram_addr;
> + int irq, ret = 0;
> +
> + mcan_class = m_can_class_allocate_dev(&pdev->dev);
> + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
> + if (!priv)
> + return -ENOMEM;
> +
> + mcan_class->device_data = priv;
> +
> + m_can_class_get_clocks(mcan_class);
> +
> + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "m_can");
> + addr = devm_ioremap_resource(&pdev->dev, res);
> + irq = platform_get_irq_byname(pdev, "int0");
> + if (IS_ERR(addr) || irq < 0) {
> + ret = -EINVAL;
> + goto failed_ret;
> + }
> +
> + /* message ram could be shared */
> + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "message_ram");
> + if (!res) {
> + ret = -ENODEV;
> + goto failed_ret;
> + }
> +
> + mram_addr = devm_ioremap(&pdev->dev, res->start, resource_size(res));
> + if (!mram_addr) {
> + ret = -ENOMEM;
> + goto failed_ret;
> + }
> +
> + priv->base = addr;
> + priv->mram_base = mram_addr;
> +
> + mcan_class->net->irq = irq;
> + mcan_class->pm_clock_support = 1;
> + mcan_class->can.clock.freq = clk_get_rate(mcan_class->cclk);
> + mcan_class->dev = &pdev->dev;
> +
> + mcan_class->ops = &m_can_plat_ops;
> +
> + mcan_class->is_peripherial = false;
> +
> + platform_set_drvdata(pdev, mcan_class->dev);
> +
> + m_can_init_ram(mcan_class);
> +
> + ret = m_can_class_register(mcan_class);
> +
> +failed_ret:
> + return ret;
> +}
> +
> +static __maybe_unused int m_can_suspend(struct device *dev)
> +{
> + return m_can_class_suspend(dev);
> +}
> +
> +static __maybe_unused int m_can_resume(struct device *dev)
> +{
> + return m_can_class_resume(dev);
> +}
> +
> +static int m_can_plat_remove(struct platform_device *pdev)
> +{
> + struct net_device *dev = platform_get_drvdata(pdev);
> + struct m_can_priv *mcan_class = netdev_priv(dev);
> +
> + m_can_class_unregister(mcan_class);
> +
> + platform_set_drvdata(pdev, NULL);
> +
> + return 0;
> +}
> +
> +static int __maybe_unused m_can_runtime_suspend(struct device *dev)
> +{
> + struct net_device *ndev = dev_get_drvdata(dev);
> + struct m_can_priv *mcan_class = netdev_priv(ndev);
> +
> + m_can_class_suspend(dev);
> +
> + clk_disable_unprepare(mcan_class->cclk);
> + clk_disable_unprepare(mcan_class->hclk);
> +
> + return 0;
> +}
> +
> +static int __maybe_unused m_can_runtime_resume(struct device *dev)
> +{
> + struct net_device *ndev = dev_get_drvdata(dev);
> + struct m_can_priv *mcan_class = netdev_priv(ndev);
> + int err;
> +
> + err = clk_prepare_enable(mcan_class->hclk);
> + if (err)
> + return err;
> +
> + err = clk_prepare_enable(mcan_class->cclk);
> + if (err)
> + clk_disable_unprepare(mcan_class->hclk);
> +
> + m_can_class_resume(dev);
> +
> + return err;
> +}
> +
> +static const struct dev_pm_ops m_can_pmops = {
> + SET_RUNTIME_PM_OPS(m_can_runtime_suspend,
> + m_can_runtime_resume, NULL)
> + SET_SYSTEM_SLEEP_PM_OPS(m_can_suspend, m_can_resume)
> +};
> +
> +static const struct of_device_id m_can_of_table[] = {
> + { .compatible = "bosch,m_can", .data = NULL },
> + { /* sentinel */ },
> +};
> +MODULE_DEVICE_TABLE(of, m_can_of_table);
> +
> +static struct platform_driver m_can_plat_driver = {
> + .driver = {
> + .name = KBUILD_MODNAME,
> + .of_match_table = m_can_of_table,
> + .pm = &m_can_pmops,
> + },
> + .probe = m_can_plat_probe,
> + .remove = m_can_plat_remove,
> +};
> +
> +module_platform_driver(m_can_plat_driver);
> +
> +MODULE_AUTHOR("Dong Aisheng <b29396@xxxxxxxxxxxxx>");
> +MODULE_AUTHOR("Dan Murphy <dmurphy@xxxxxx>");
> +MODULE_LICENSE("GPL v2");
> +MODULE_DESCRIPTION("M_CAN driver for IO Mapped Bosch controllers");
>
Wolfgang.