Re: [PATCH v3] mmc: host: sdhci-sprd: Fix the incorrect soft reset operation when runtime resuming

[Baolin Wang]

On Tue, 16 Jul 2019 at 18:40, Adrian Hunter <adrian.hunter@xxxxxxxxx> wrote:
>
> On 16/07/19 11:39 AM, Baolin Wang wrote:
> > In sdhci_runtime_resume_host() function, we will always do software reset
> > for all, which will cause Spreadtrum host controller work abnormally after
> > resuming.
> >
> > Thus for Spreadtrum platform that do not power down the SD/eMMC card during
> > runtime suspend, we should not do software reset for all. To fix this
> > issue, adding a specific reset operation that add one condition to validate
> > the MMC_CAP_AGGRESSIVE_PM to decide if we can do software reset for all or
> > just reset command and data lines.
> >
> > Signed-off-by: Baolin Wang <baolin.wang@xxxxxxxxxx>
> > ---
> > Changes from v2:
> >  - Simplify the sdhci_sprd_reset() by issuing sdhci_reset().
> >
> > Changes from v1:
> >  - Add a specific reset operation instead of changing the core to avoid
> >  affecting other hardware.
> > ---
> >  drivers/mmc/host/sdhci-sprd.c |   19 ++++++++++++++++++-
> >  1 file changed, 18 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/mmc/host/sdhci-sprd.c b/drivers/mmc/host/sdhci-sprd.c
> > index 603a5d9..bc9393c 100644
> > --- a/drivers/mmc/host/sdhci-sprd.c
> > +++ b/drivers/mmc/host/sdhci-sprd.c
> > @@ -373,6 +373,23 @@ static unsigned int sdhci_sprd_get_max_timeout_count(struct sdhci_host *host)
> >       return 1 << 31;
> >  }
> >
> > +static void sdhci_sprd_reset(struct sdhci_host *host, u8 mask)
> > +{
> > +     struct mmc_host *mmc = host->mmc;
> > +
> > +     /*
> > +      * When try to reset controller after runtime suspend, we should not
> > +      * reset for all if the SD/eMMC card is not power down, just reset
> > +      * command and data lines instead. Otherwise will meet some strange
> > +      * behaviors for Spreadtrum host controller.
> > +      */
> > +     if (host->runtime_suspended && (mask & SDHCI_RESET_ALL) &&
> > +         !(mmc->caps & MMC_CAP_AGGRESSIVE_PM))
>
> MMC_CAP_AGGRESSIVE_PM does not necessarily mean that the card will have been
> runtime suspended.
>
> What about checking if the card power is on? i.e.

Yes, you are totally correct. I'll fix this in next version. Thanks
for your comments.

>         if (host->runtime_suspended && (mask & SDHCI_RESET_ALL) &&
>             mmc->ios.power_mode == MMC_POWER_ON)
>
> > +             mask = SDHCI_RESET_CMD | SDHCI_RESET_DATA;
> > +
> > +     sdhci_reset(host, mask);
> > +}
> > +
> >  static struct sdhci_ops sdhci_sprd_ops = {
> >       .read_l = sdhci_sprd_readl,
> >       .write_l = sdhci_sprd_writel,
> > @@ -381,7 +398,7 @@ static unsigned int sdhci_sprd_get_max_timeout_count(struct sdhci_host *host)
> >       .get_max_clock = sdhci_sprd_get_max_clock,
> >       .get_min_clock = sdhci_sprd_get_min_clock,
> >       .set_bus_width = sdhci_set_bus_width,
> > -     .reset = sdhci_reset,
> > +     .reset = sdhci_sprd_reset,
> >       .set_uhs_signaling = sdhci_sprd_set_uhs_signaling,
> >       .hw_reset = sdhci_sprd_hw_reset,
> >       .get_max_timeout_count = sdhci_sprd_get_max_timeout_count,
> >
>


-- 
Baolin Wang
Best Regards