[PATCH 0/3] Add support for i.MXQXP AI_ML board

[Manivannan Sadhasivam]

Hello,

This patchset adds support for i.MXQXP AI_ML board from Einfochips.
This board is one of the Consumer Edition boards of the 96Boards family
based on i.MX8QXP SoC from NXP/Freescale.

The initial support includes following peripherals which are tested and
known to be working:

1. Debug serial via UART2
2. uSD
3. WiFi
4. Ethernet

More information about this board can be found in Arrow website:
https://www.arrow.com/en/products/imx8-ai-ml/arrow-development-tools

Thanks,
Mani

Manivannan Sadhasivam (3):
  dt-bindings: Add Vendor prefix for Einfochips
  dt-bindings: arm: Document i.MX8QXP AI_ML board binding
  arm64: dts: freescale: Add support for i.MX8QXP AI_ML board

 .../devicetree/bindings/arm/fsl.yaml          |   1 +
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 arch/arm64/boot/dts/freescale/Makefile        |   1 +
 .../boot/dts/freescale/imx8qxp-ai_ml.dts      | 249 ++++++++++++++++++
 4 files changed, 253 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts

-- 
2.17.1