[PATCH v3 1/1] hwmon: (k8temp) update to use new hwmon registration API

From: Robert Karszniewicz
Date: Sun Jul 21 2019 - 08:01:32 EST


Removes:
- hwmon_dev from k8temp_data struct, as that is now passed
to callbacks, anyway.
- other k8temp_data struct fields, too.
- k8temp_update_device()

Also reduces binary size:
text data bss dec hex filename
4139 1448 0 5587 15d3 drivers/hwmon/k8temp.ko.bak
3103 1220 0 4323 10e3 drivers/hwmon/k8temp.ko

Signed-off-by: Robert Karszniewicz <avoidr@xxxxxxxxxxx>
Signed-off-by: Robert Karszniewicz <avoidr@xxxxxxxxxx>
---
Changes from v2:
- if (data->swap_core_select)
- core ^= 1;
+ core ^= data->swap_core_select;

However, that produces slightly more .text than v2, and is a tad too
"tricky", I personally find.

- Changed email service due to problems with the previous one.

Changes from v1:
- correct is_visible() and remove unnecessary checks
- k8temp_read(): remove unnecessary checks and replace the switch
- use HWMON_CHANNEL_INFO()
- remove k8temp->name and pass the string directly
- use PTR_ERR_OR_ZERO()
- remove k8temp_update_device() and more k8temp_data fields

drivers/hwmon/k8temp.c | 233 ++++++++++++-----------------------------
1 file changed, 69 insertions(+), 164 deletions(-)

diff --git a/drivers/hwmon/k8temp.c b/drivers/hwmon/k8temp.c
index 4994c90c8929..f73bd4eceb28 100644
--- a/drivers/hwmon/k8temp.c
+++ b/drivers/hwmon/k8temp.c
@@ -10,10 +10,8 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
-#include <linux/jiffies.h>
#include <linux/pci.h>
#include <linux/hwmon.h>
-#include <linux/hwmon-sysfs.h>
#include <linux/err.h>
#include <linux/mutex.h>
#include <asm/processor.h>
@@ -24,108 +22,18 @@
#define SEL_CORE 0x04

struct k8temp_data {
- struct device *hwmon_dev;
struct mutex update_lock;
- const char *name;
- char valid; /* zero until following fields are valid */
- unsigned long last_updated; /* in jiffies */

/* registers values */
u8 sensorsp; /* sensor presence bits - SEL_CORE, SEL_PLACE */
- u32 temp[2][2]; /* core, place */
u8 swap_core_select; /* meaning of SEL_CORE is inverted */
u32 temp_offset;
};

-static struct k8temp_data *k8temp_update_device(struct device *dev)
-{
- struct k8temp_data *data = dev_get_drvdata(dev);
- struct pci_dev *pdev = to_pci_dev(dev);
- u8 tmp;
-
- mutex_lock(&data->update_lock);
-
- if (!data->valid
- || time_after(jiffies, data->last_updated + HZ)) {
- pci_read_config_byte(pdev, REG_TEMP, &tmp);
- tmp &= ~(SEL_PLACE | SEL_CORE); /* Select sensor 0, core0 */
- pci_write_config_byte(pdev, REG_TEMP, tmp);
- pci_read_config_dword(pdev, REG_TEMP, &data->temp[0][0]);
-
- if (data->sensorsp & SEL_PLACE) {
- tmp |= SEL_PLACE; /* Select sensor 1, core0 */
- pci_write_config_byte(pdev, REG_TEMP, tmp);
- pci_read_config_dword(pdev, REG_TEMP,
- &data->temp[0][1]);
- }
-
- if (data->sensorsp & SEL_CORE) {
- tmp &= ~SEL_PLACE; /* Select sensor 0, core1 */
- tmp |= SEL_CORE;
- pci_write_config_byte(pdev, REG_TEMP, tmp);
- pci_read_config_dword(pdev, REG_TEMP,
- &data->temp[1][0]);
-
- if (data->sensorsp & SEL_PLACE) {
- tmp |= SEL_PLACE; /* Select sensor 1, core1 */
- pci_write_config_byte(pdev, REG_TEMP, tmp);
- pci_read_config_dword(pdev, REG_TEMP,
- &data->temp[1][1]);
- }
- }
-
- data->last_updated = jiffies;
- data->valid = 1;
- }
-
- mutex_unlock(&data->update_lock);
- return data;
-}
-
-/*
- * Sysfs stuff
- */
-
-static ssize_t name_show(struct device *dev, struct device_attribute
- *devattr, char *buf)
-{
- struct k8temp_data *data = dev_get_drvdata(dev);
-
- return sprintf(buf, "%s\n", data->name);
-}
-
-
-static ssize_t temp_show(struct device *dev, struct device_attribute *devattr,
- char *buf)
-{
- struct sensor_device_attribute_2 *attr =
- to_sensor_dev_attr_2(devattr);
- int core = attr->nr;
- int place = attr->index;
- int temp;
- struct k8temp_data *data = k8temp_update_device(dev);
-
- if (data->swap_core_select && (data->sensorsp & SEL_CORE))
- core = core ? 0 : 1;
-
- temp = TEMP_FROM_REG(data->temp[core][place]) + data->temp_offset;
-
- return sprintf(buf, "%d\n", temp);
-}
-
-/* core, place */
-
-static SENSOR_DEVICE_ATTR_2_RO(temp1_input, temp, 0, 0);
-static SENSOR_DEVICE_ATTR_2_RO(temp2_input, temp, 0, 1);
-static SENSOR_DEVICE_ATTR_2_RO(temp3_input, temp, 1, 0);
-static SENSOR_DEVICE_ATTR_2_RO(temp4_input, temp, 1, 1);
-static DEVICE_ATTR_RO(name);
-
static const struct pci_device_id k8temp_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB_MISC) },
{ 0 },
};
-
MODULE_DEVICE_TABLE(pci, k8temp_ids);

static int is_rev_g_desktop(u8 model)
@@ -159,14 +67,76 @@ static int is_rev_g_desktop(u8 model)
return 1;
}

+static umode_t
+k8temp_is_visible(const void *drvdata, enum hwmon_sensor_types type,
+ u32 attr, int channel)
+{
+ const struct k8temp_data *data = drvdata;
+
+ if ((channel & 1) && !(data->sensorsp & SEL_PLACE))
+ return 0;
+
+ if ((channel & 2) && !(data->sensorsp & SEL_CORE))
+ return 0;
+
+ return 0444;
+}
+
+static int
+k8temp_read(struct device *dev, enum hwmon_sensor_types type,
+ u32 attr, int channel, long *val)
+{
+ struct k8temp_data *data = dev_get_drvdata(dev);
+ struct pci_dev *pdev = to_pci_dev(dev->parent);
+ int core, place;
+ u32 temp;
+ u8 tmp;
+
+ core = (channel >> 1) & 1;
+ place = channel & 1;
+
+ core ^= data->swap_core_select;
+
+ mutex_lock(&data->update_lock);
+ pci_read_config_byte(pdev, REG_TEMP, &tmp);
+ tmp &= ~(SEL_PLACE | SEL_CORE);
+ if (core)
+ tmp |= SEL_CORE;
+ if (place)
+ tmp |= SEL_PLACE;
+ pci_write_config_byte(pdev, REG_TEMP, tmp);
+ pci_read_config_dword(pdev, REG_TEMP, &temp);
+ mutex_unlock(&data->update_lock);
+
+ *val = TEMP_FROM_REG(temp) + data->temp_offset;
+
+ return 0;
+}
+
+static const struct hwmon_ops k8temp_ops = {
+ .is_visible = k8temp_is_visible,
+ .read = k8temp_read,
+};
+
+static const struct hwmon_channel_info *k8temp_info[] = {
+ HWMON_CHANNEL_INFO(temp,
+ HWMON_T_INPUT, HWMON_T_INPUT, HWMON_T_INPUT, HWMON_T_INPUT),
+ NULL
+};
+
+static const struct hwmon_chip_info k8temp_chip_info = {
+ .ops = &k8temp_ops,
+ .info = k8temp_info,
+};
+
static int k8temp_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
{
- int err;
u8 scfg;
u32 temp;
u8 model, stepping;
struct k8temp_data *data;
+ struct device *hwmon_dev;

data = devm_kzalloc(&pdev->dev, sizeof(struct k8temp_data), GFP_KERNEL);
if (!data)
@@ -231,86 +201,21 @@ static int k8temp_probe(struct pci_dev *pdev,
data->sensorsp &= ~SEL_CORE;
}

- data->name = "k8temp";
mutex_init(&data->update_lock);
- pci_set_drvdata(pdev, data);
-
- /* Register sysfs hooks */
- err = device_create_file(&pdev->dev,
- &sensor_dev_attr_temp1_input.dev_attr);
- if (err)
- goto exit_remove;
-
- /* sensor can be changed and reports something */
- if (data->sensorsp & SEL_PLACE) {
- err = device_create_file(&pdev->dev,
- &sensor_dev_attr_temp2_input.dev_attr);
- if (err)
- goto exit_remove;
- }
-
- /* core can be changed and reports something */
- if (data->sensorsp & SEL_CORE) {
- err = device_create_file(&pdev->dev,
- &sensor_dev_attr_temp3_input.dev_attr);
- if (err)
- goto exit_remove;
- if (data->sensorsp & SEL_PLACE) {
- err = device_create_file(&pdev->dev,
- &sensor_dev_attr_temp4_input.
- dev_attr);
- if (err)
- goto exit_remove;
- }
- }
-
- err = device_create_file(&pdev->dev, &dev_attr_name);
- if (err)
- goto exit_remove;

- data->hwmon_dev = hwmon_device_register(&pdev->dev);
+ hwmon_dev = devm_hwmon_device_register_with_info(&pdev->dev,
+ "k8temp",
+ data,
+ &k8temp_chip_info,
+ NULL);

- if (IS_ERR(data->hwmon_dev)) {
- err = PTR_ERR(data->hwmon_dev);
- goto exit_remove;
- }
-
- return 0;
-
-exit_remove:
- device_remove_file(&pdev->dev,
- &sensor_dev_attr_temp1_input.dev_attr);
- device_remove_file(&pdev->dev,
- &sensor_dev_attr_temp2_input.dev_attr);
- device_remove_file(&pdev->dev,
- &sensor_dev_attr_temp3_input.dev_attr);
- device_remove_file(&pdev->dev,
- &sensor_dev_attr_temp4_input.dev_attr);
- device_remove_file(&pdev->dev, &dev_attr_name);
- return err;
-}
-
-static void k8temp_remove(struct pci_dev *pdev)
-{
- struct k8temp_data *data = pci_get_drvdata(pdev);
-
- hwmon_device_unregister(data->hwmon_dev);
- device_remove_file(&pdev->dev,
- &sensor_dev_attr_temp1_input.dev_attr);
- device_remove_file(&pdev->dev,
- &sensor_dev_attr_temp2_input.dev_attr);
- device_remove_file(&pdev->dev,
- &sensor_dev_attr_temp3_input.dev_attr);
- device_remove_file(&pdev->dev,
- &sensor_dev_attr_temp4_input.dev_attr);
- device_remove_file(&pdev->dev, &dev_attr_name);
+ return PTR_ERR_OR_ZERO(hwmon_dev);
}

static struct pci_driver k8temp_driver = {
.name = "k8temp",
.id_table = k8temp_ids,
.probe = k8temp_probe,
- .remove = k8temp_remove,
};

module_pci_driver(k8temp_driver);
--
2.22.0