Re: [External Email] Re: [PATCH v1 0/2] virtio-mmio: support multiple interrupt vectors

From: Michael S. Tsirkin
Date: Mon Jul 22 2019 - 04:40:10 EST


On Mon, Jul 22, 2019 at 11:22:02AM +0800, æè wrote:
> On Fri, Jul 19, 2019 at 11:14 PM Michael S. Tsirkin <mst@xxxxxxxxxx> wrote:
> >
> > On Fri, Jul 19, 2019 at 09:31:33PM +0800, Fei Li wrote:
> > > Hi,
> > >
> > > This patch series implements multiple interrupt vectors support for
> > > virtio-mmio device. This is especially useful for multiqueue vhost-net
> > > device when using firecracker micro-vms as the guest.
> > >
> > > Test result:
> > > With 8 vcpus & 8 net queues set, one vhost-net device with 8 irqs can
> > > receive 9 times more pps comparing with only one irq:
> > > - 564830.38 rxpck/s for 8 irqs on
> > > - 67665.06 rxpck/s for 1 irq on
> > >
> > > Please help to review, thanks!
> > >
> > > Have a nice day
> > > Fei
> >
> >
> > Interesting. The spec says though:
> >
> > 4.2.3.4
> > Notifications From The Device
> > The memory mapped virtio device is using a single, dedicated interrupt signal, which is asserted when at
> > least one of the bits described in the description of InterruptStatus is set. This is how the device sends a
> > used buffer notification or a configuration change notification to the device.
> >
> Yes, the spec needs to be updated if we want to use mult-irqs.
> >
> > So I'm guessing we need to change the host/guest interface?
> Just to confirm, does the "the host/guest interface" you mentioned mean how to
> pass the irq information from the user space tool to guest kernel?
> In this patch, we do this by passing the [irq_start, irq_end]
> interface via setting guest
> kernel command line, that is done in vm_cmdline_set().
> Also there is another way to do this: add two new registers describing irq info
> (irq_start & irq_end OR irq_start & irq_numbers) to the virtio config space.
>
> Which one do you prefer?

I'm not sure - so far irq was passed on the command line, right?

The first step in implementing any spec change would be to update qemu
code to virtio 1. Which is not a huge project but so far no one
bothered.


> > If true pls cc virtio-dev.
> Sure.
> >
> > Also, do we need to update dt bindings documentation?
> You mean the following doc? Sure. :)
> https://github.com/torvalds/linux/blob/master/Documentation/devicetree/bindings/virtio/mmio.txt
>
> Thanks for the review!
>
> Have a nice day
> Fei
>
>
> >
> > >
> > > Fam Zheng (1):
> > > virtio-mmio: Process vrings more proactively
> > >
> > > Fei Li (1):
> > > virtio-mmio: support multiple interrupt vectors
> > >
> > > drivers/virtio/virtio_mmio.c | 238 +++++++++++++++++++++++++++++++++++--------
> > > 1 file changed, 196 insertions(+), 42 deletions(-)
> > >
> > > --
> > > 2.11.0