Re: [PATCH v4 0/4] Add a generic driver for LED-based backlight

[Jacek Anaszewski]

On 7/22/19 9:06 AM, Lee Jones wrote:
> On Thu, 18 Jul 2019, Jacek Anaszewski wrote:
> 
>> On 7/17/19 4:15 PM, Jean-Jacques Hiblot wrote:
>>> This series aims to add a led-backlight driver, similar to pwm-backlight,
>>> but using a LED class device underneath.
>>>
>>> A few years ago (2015), Tomi Valkeinen posted a series implementing a
>>> backlight driver on top of a LED device:
>>> https://patchwork.kernel.org/patch/7293991/
>>> https://patchwork.kernel.org/patch/7294001/
>>> https://patchwork.kernel.org/patch/7293981/
>>>
>>> The discussion stopped because Tomi lacked the time to work on it.
>>>
>>> changes in v4:
>>> - fix dev_err() messages and commit logs following the advices of Pavel
>>> - cosmetic changes (indents, getting rid of  "? 1 : 0" in
>>>   led_match_led_node())
>>>
>>> changes in v3:
>>> - dt binding: don't limit the brightness range to 0-255. Use the range of
>>>   the underlying LEDs. as a side-effect, all LEDs must now have the same
>>>   range
>>> - driver: Adapt to dt binding update.
>>> - driver: rework probe() for clarity and remove the remaining goto.
>>>
>>> changes in v2:
>>> - handle more than one LED.
>>> - don't make the backlight device a child of the LED controller.
>>> - make brightness-levels and default-brightness-level optional
>>> - removed the option to use a GPIO enable.
>>> - removed the option to use a regulator. It should be handled by the LED
>>>   core
>>> - don't make any change to the LED core (not needed anymore)
>>>
>>> Jean-Jacques Hiblot (2):
>>>   leds: Add managed API to get a LED from a device driver
>>>   dt-bindings: backlight: Add led-backlight binding
>>>
>>> Tomi Valkeinen (2):
>>>   leds: Add of_led_get() and led_put()
>>>   backlight: add led-backlight driver
>>>
>>>  .../bindings/leds/backlight/led-backlight.txt |  28 ++
>>>  drivers/leds/led-class.c                      |  92 ++++++
>>>  drivers/video/backlight/Kconfig               |   7 +
>>>  drivers/video/backlight/Makefile              |   1 +
>>>  drivers/video/backlight/led_bl.c              | 268 ++++++++++++++++++
>>>  include/linux/leds.h                          |   6 +
>>>  6 files changed, 402 insertions(+)
>>>  create mode 100644 Documentation/devicetree/bindings/leds/backlight/led-backlight.txt
>>>  create mode 100644 drivers/video/backlight/led_bl.c
>>>
>>
>> For the whole set:
>>
>> Acked-by: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
>>
>> Lee - we need to create immutable branch for this set since there will
>> be some interfering changes in the LED core in this cycle.
>>
>> I can create the branch and send the pull request once we will
>> obtain the ack from Rob for DT bindings, unless you have other
>> preference.
> 
> We also require a review to be conducted by Daniel Thompson.
> 
> After which, an immutable branch sounds like a good idea.  I'd like to
> create this myself if you don't mind.

Sure, thanks.

-- 
Best regards,
Jacek Anaszewski