Re: [PATCH v3] Input: elantech: Enable SMBus on new (2018+) systems

[Kai-Heng Feng]

Hi Dmitry,

at 16:17, Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx> wrote:

> Hi Kai-Heng,
>
> On Mon, Jul 22, 2019 at 03:40:55PM +0800, Kai-Heng Feng wrote:
> > There are some new HP laptops with Elantech touchpad don't support
> > multitouch.
> >
> > Currently we use ETP_NEW_IC_SMBUS_HOST_NOTIFY() to check if SMBus is
> > supported, but in addition to firmware version, the bus type also
> > informs us if the IC can support SMBus, so also check that.
> >
> > In case of breaking old ICs, only enables SMBus on systems manufactured
> > after 2018, alongsides aforementioned checks.
> >
> > Lastly, consolidats all check into elantech_use_host_notify() and use it
> > to determine whether to use PS/2 or SMBus.
> >
> > Signed-off-by: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
> > Signed-off-by: Your Name <you@xxxxxxxxxxx>
>
> I do not think "Your Name" should be signing DCO here :)

Yes I donât know how I messed that up...

> > +static bool elantech_use_host_notify(struct psmouse *psmouse,
> > +				     struct elantech_device_info *info)
> > +{
> > +	bool host_notify = false;
> > +
> > +	if (ETP_NEW_IC_SMBUS_HOST_NOTIFY(info->fw_version))
> > +		host_notify = true;
> > +	else {
> > +		switch (info->bus) {
> > +		case ETP_BUS_PS2_ONLY:
> > +			/* expected case */
> > +			break;
> > +		case ETP_BUS_SMB_ALERT_ONLY:
> > +			/* fall-through  */
> > +		case ETP_BUS_PS2_SMB_ALERT:
> > +			psmouse_dbg(psmouse, "Ignoring SMBus provider  
> > through alert protocol.\n");
> > +			break;
> > +		case ETP_BUS_SMB_HST_NTFY_ONLY:
> > +			/* fall-through  */
> > +		case ETP_BUS_PS2_SMB_HST_NTFY:
> > +			/* SMbus implementation is stable since 2018 */
> > +			if (dmi_get_bios_year() >= 2018)
> > +				host_notify = true;
> > +			break;
> > +		default:
> > +			psmouse_dbg(psmouse,
> > +				    "Ignoring SMBus bus provider %d.\n",
> > +				    info->bus);
> > +		}
> > +	}
>
> I think this is way too verbose. How about a bit more condensed form:

The one revised by you is more succinct. Please use yours instead :)

Thanks!

Kai-Heng

> Input: elantech - enable SMBus on new (2018+) systems
>
> From: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
>
> There are some new HP laptops with Elantech touchpad that don't support
> multitouch.
>
> Currently we use ETP_NEW_IC_SMBUS_HOST_NOTIFY() to check if SMBus is  
> supported,
> but in addition to firmware version, the bus type also informs us whether  
> the IC
> can support SMBus. To avoid breaking old ICs, we will only enable SMbus  
> support
> based the bus type on systems manufactured after 2018.
>
> Lastly, let's consolidate all checks into elantech_use_host_notify() and  
> use it
> to determine whether to use PS/2 or SMBus.
>
> Signed-off-by: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
> Acked-by: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
> Cc: stable@xxxxxxxxxxxxxxx
> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
> ---
>  drivers/input/mouse/elantech.c |   54 +++++++++++++++++++---------------------
>  1 file changed, 25 insertions(+), 29 deletions(-)
>
> diff --git a/drivers/input/mouse/elantech.c  
> b/drivers/input/mouse/elantech.c
> index 2d8434b7b623..73544776a9ed 100644
> --- a/drivers/input/mouse/elantech.c
> +++ b/drivers/input/mouse/elantech.c
> @@ -1827,6 +1827,30 @@ static int elantech_create_smbus(struct psmouse  
> *psmouse,
>  				  leave_breadcrumbs);
>  }
>
> +static bool elantech_use_host_notify(struct psmouse *psmouse,
> +				     struct elantech_device_info *info)
> +{
> +	if (ETP_NEW_IC_SMBUS_HOST_NOTIFY(info->fw_version))
> +		return true;
> +
> +	switch (info->bus) {
> +	case ETP_BUS_PS2_ONLY:
> +		/* expected case */
> +		break;
> +	case ETP_BUS_SMB_HST_NTFY_ONLY:
> +	case ETP_BUS_PS2_SMB_HST_NTFY:
> +		/* SMbus implementation is stable since 2018 */
> +		if (dmi_get_bios_year() >= 2018)
> +			return true;
> +	default:
> +		psmouse_dbg(psmouse,
> +			    "Ignoring SMBus bus provider %d\n", info->bus);
> +		break;
> +	}
> +
> +	return false;
> +}
> +
>  /**
>   * elantech_setup_smbus - called once the PS/2 devices are enumerated
>   * and decides to instantiate a SMBus InterTouch device.
> @@ -1846,7 +1870,7 @@ static int elantech_setup_smbus(struct psmouse  
> *psmouse,
>  		 * i2c_blacklist_pnp_ids.
>  		 * Old ICs are up to the user to decide.
>  		 */
> -		if (!ETP_NEW_IC_SMBUS_HOST_NOTIFY(info->fw_version) ||
> +		if (!elantech_use_host_notify(psmouse, info) ||
>  		    psmouse_matches_pnp_id(psmouse, i2c_blacklist_pnp_ids))
>  			return -ENXIO;
>  	}
> @@ -1866,34 +1890,6 @@ static int elantech_setup_smbus(struct psmouse  
> *psmouse,
>  	return 0;
>  }
>
> -static bool elantech_use_host_notify(struct psmouse *psmouse,
> -				     struct elantech_device_info *info)
> -{
> -	if (ETP_NEW_IC_SMBUS_HOST_NOTIFY(info->fw_version))
> -		return true;
> -
> -	switch (info->bus) {
> -	case ETP_BUS_PS2_ONLY:
> -		/* expected case */
> -		break;
> -	case ETP_BUS_SMB_ALERT_ONLY:
> -		/* fall-through  */
> -	case ETP_BUS_PS2_SMB_ALERT:
> -		psmouse_dbg(psmouse, "Ignoring SMBus provider through alert  
> protocol.\n");
> -		break;
> -	case ETP_BUS_SMB_HST_NTFY_ONLY:
> -		/* fall-through  */
> -	case ETP_BUS_PS2_SMB_HST_NTFY:
> -		return true;
> -	default:
> -		psmouse_dbg(psmouse,
> -			    "Ignoring SMBus bus provider %d.\n",
> -			    info->bus);
> -	}
> -
> -	return false;
> -}
> -
>  int elantech_init_smbus(struct psmouse *psmouse)
>  {
>  	struct elantech_device_info info;
>
> Thanks.
>
> --
> Dmitry