Re: [PATCH v6 4/7] ARM: dts: sun8i-h3: Add thermal sensor and thermal zones

[Samuel Holland]

Hi,

On 11/26/19 11:29 PM, Vasily Khoruzhick wrote:
> From: Ondrej Jirman <megous@xxxxxxxxxx>
> 
> There is just one sensor for the CPU.
> 
> Signed-off-by: Ondrej Jirman <megous@xxxxxxxxxx>
> Signed-off-by: Vasily Khoruzhick <anarsoul@xxxxxxxxx>
> ---
>  arch/arm/boot/dts/sun8i-h3.dtsi | 26 ++++++++++++++++++++++++++
>  1 file changed, 26 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
> index e37c30e811d3..42fd0418d678 100644
> --- a/arch/arm/boot/dts/sun8i-h3.dtsi
> +++ b/arch/arm/boot/dts/sun8i-h3.dtsi
> @@ -177,6 +177,26 @@
>  			assigned-clocks = <&ccu CLK_GPU>;
>  			assigned-clock-rates = <384000000>;
>  		};
> +
> +		ths: ths@1c25000 {
> +			compatible = "allwinner,sun8i-h3-ths";
> +			reg = <0x01c25000 0x400>;
> +			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
> +			resets = <&ccu RST_BUS_THS>;
> +			clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_THS>;
> +			clock-names = "bus", "mod";
> +			nvmem-cells = <&ths_calibration>;
> +			nvmem-cell-names = "calibration";
> +			#thermal-sensor-cells = <0>;
> +		};
> +	};
> +
> +	thermal-zones {
> +		cpu_thermal: cpu-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&ths 0>;
> +		};
>  	};
>  };
>  
> @@ -234,4 +254,10 @@
>  
>  &sid {
>  	compatible = "allwinner,sun8i-h3-sid";
> +	#address-cells = <1>;
> +	#size-cells = <1>;
> +
> +	ths_calibration: thermal-sensor-calibration@34 {
> +		reg = <0x34 4>;
> +	};

All of the lines added here are common between the H3 and H5, so they can go in
the shared SID node in sunxi-h3-h5.dtsi.

Cheers,
Samuel

>  };
>