Re: [00/12] add STM32 FMC2 controller drivers

[Christophe Kerello]

On 3/24/20 2:27 PM, Marek Vasut wrote:
> On 3/24/20 8:36 AM, Christophe Kerello wrote:
> > On 3/24/20 1:37 AM, Marek Vasut wrote:
> > > On 3/23/20 3:58 PM, Christophe Kerello wrote:
> > > > The FMC2 functional block makes the interface with: synchronous and
> > > > asynchronous static devices (such as PSNOR, PSRAM or other memory-mapped
> > > > peripherals) and NAND flash memories.
> > > > Its main purposes are:
> > > >  ÂÂ - to translate AXI transactions into the appropriate external device
> > > >  ÂÂÂÂ protocol
> > > >  ÂÂ - to meet the access time requirements of the external devices
> > > > All external devices share the addresses, data and control signals
> > > > with the
> > > > controller. Each external device is accessed by means of a unique Chip
> > > > Select. The FMC2 performs only one access at a time to an external
> > > > device.
> > > >
> > > > Christophe Kerello (12):
> > > >  ÂÂ dt-bindings: mfd: stm32-fmc2: add STM32 FMC2 controller documentation
> > > >  ÂÂ mfd: stm32-fmc2: add STM32 FMC2 controller driver
> > > >  ÂÂ bus: stm32-fmc2-ebi: add STM32 FMC2 EBI controller driver
> > > >  ÂÂ mtd: rawnand: stm32_fmc2: manage all errors cases at probe time
> > > >  ÂÂ mtd: rawnand: stm32_fmc2: remove useless inline comments
> > > >  ÂÂ mtd: rawnand: stm32_fmc2: use FMC2_TIMEOUT_MS for timeouts
> > > >  ÂÂ mtd: rawnand: stm32_fmc2: cleanup
> > > >  ÂÂ mtd: rawnand: stm32_fmc2: use FIELD_PREP/FIELD_GET macros
> > > >  ÂÂ mtd: rawnand: stm32_fmc2: move all registers
> > > >  ÂÂ mtd: rawnand: stm32_fmc2: use regmap APIs
> > > >  ÂÂ mtd: rawnand: stm32_fmc2: use stm32_fmc2 structure in nfc controller
> > > >  ÂÂ mtd: rawnand: stm32_fmc2: add new MP1 compatible string
> > >
> > > This doesn't apply to either next or 5.6-rc7, do you have a tree
> > > somewhere with those patches applied ?
> >
> > Hi Marek,
>
> Hi,
>
> > This implementation has been done on mtd/nand/next branch.
>
> Of which tree ?

Hi Marek,

I am using https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git

Regards,
Christophe Kerello.