[PATCH v4 2/2] MIPS: Loongson64: Add pm block node for Loongson-2K1000

[Qing Zhang]

The module is now supported, enable it.

Signed-off-by: Qing Zhang <zhangqing@xxxxxxxxxxx>
---

v3-v4:
No change

Signed-off-by: Qing Zhang <zhangqing@xxxxxxxxxxx>
---
 arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi b/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
index 569e814def83..e31176ac0ac2 100644
--- a/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
+++ b/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi
@@ -101,6 +101,15 @@ uart0: serial@1fe00000 {
 			no-loopback-test;
 		};
 
+		pm: power-controller {
+			device_type = "power management";
+			compatible = "loongson, reset-controller";
+			reg = <0 0x1fe0700c 0 0x8>,
+				<0 0x1fe07014 0 0x8>,
+				<0 0x1fe07030 0 0x8>;
+			reg-names = "pm1_sts", "pm1_cnt", "rst_cnt";
+		};
+
 		pci@1a000000 {
 			compatible = "loongson,ls2k-pci";
 			device_type = "pci";
-- 
2.31.0