Re: [PATCH v6 05/15] regulator: Introduce tps68470-regulator driver

From: Hans de Goede
Date: Fri Nov 26 2021 - 06:24:43 EST

Hi Laurent,

On 11/26/21 00:32, Laurent Pinchart wrote:
> Hi Hans,
>
> Thank you for the patch.
>
> I've had a quick look and the driver seems fine. Just a few comments
> below.
>
> On Thu, Nov 25, 2021 at 05:54:02PM +0100, Hans de Goede wrote:
>> The TPS68470 PMIC provides Clocks, GPIOs and Regulators. At present in
>> the kernel the Regulators and Clocks are controlled by an OpRegion
>> driver designed to work with power control methods defined in ACPI, but
>> some platforms lack those methods, meaning drivers need to be able to
>> consume the resources of these chips through the usual frameworks.
>>
>> This commit adds a driver for the regulators provided by the tps68470,
>> and is designed to bind to the platform_device registered by the
>> intel_skl_int3472 module.
>>
>> This is based on this out of tree driver written by Intel:
>> https://github.com/intel/linux-intel-lts/blob/4.14/base/drivers/regulator/tps68470-regulator.c
>> with various cleanups added.
>>
>> Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
>> Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
>> ---
>> Changes in v6:
>> - Drop the unused volt_table argument from the TPS68470_REGULATOR() macro
>> - While working on VCM (voice coil motor) support for the camera-module behind
>> this PMIC I learned that the VIO voltage is always on. Instead of pointing its
>> enable_reg and enable_mask at the same register-bits as the VSIO regulator
>> (which is wrong), add a new tps68470_always_on_reg_ops struct without
>> is_enabled, enable and disable ops and use that for the VIO regulator.
>>
>> Changes in v5:
>> - Small comment / code cleanups based on review from Andy
>>
>> Changes in v4:
>> - Make the top comment block use c++ style comments
>> - Drop the bogus builtin regulator_init_data
>> - Add || COMPILE_TEST to Kconfig snippet
>> - Make the driver enable the PMIC clk when enabling the Core buck
>> regulator, this switching regulator needs the PLL to be on
>>
>> Changes in v2:
>> - Update the comment on why a subsys_initcall is used to register the drv
>> - Make struct regulator_ops const
>> ---
>> drivers/regulator/Kconfig | 9 ++
>> drivers/regulator/Makefile | 1 +
>> drivers/regulator/tps68470-regulator.c | 201 +++++++++++++++++++++++++
>> 3 files changed, 211 insertions(+)
>> create mode 100644 drivers/regulator/tps68470-regulator.c
>>
>> diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
>> index 6be9b1c8a615..ebe46e09510e 100644
>> --- a/drivers/regulator/Kconfig
>> +++ b/drivers/regulator/Kconfig
>> @@ -1339,6 +1339,15 @@ config REGULATOR_TPS65912
>> help
>> This driver supports TPS65912 voltage regulator chip.
>>
>> +config REGULATOR_TPS68470
>> + tristate "TI TPS68470 PMIC Regulators Driver"
>> + depends on INTEL_SKL_INT3472 || COMPILE_TEST
>> + help
>> + This driver adds support for the TPS68470 PMIC to register
>> + regulators against the usual framework.
>> +
>> + The module will be called "tps68470-regulator".
>> +
>> config REGULATOR_TWL4030
>> tristate "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC"
>> depends on TWL4030_CORE
>> diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
>> index b07d2a22df0b..257331d2caed 100644
>> --- a/drivers/regulator/Makefile
>> +++ b/drivers/regulator/Makefile
>> @@ -159,6 +159,7 @@ obj-$(CONFIG_REGULATOR_TPS6586X) += tps6586x-regulator.o
>> obj-$(CONFIG_REGULATOR_TPS65910) += tps65910-regulator.o
>> obj-$(CONFIG_REGULATOR_TPS65912) += tps65912-regulator.o
>> obj-$(CONFIG_REGULATOR_TPS65132) += tps65132-regulator.o
>> +obj-$(CONFIG_REGULATOR_TPS68470) += tps68470-regulator.o
>> obj-$(CONFIG_REGULATOR_TWL4030) += twl-regulator.o twl6030-regulator.o
>> obj-$(CONFIG_REGULATOR_UNIPHIER) += uniphier-regulator.o
>> obj-$(CONFIG_REGULATOR_VCTRL) += vctrl-regulator.o
>> diff --git a/drivers/regulator/tps68470-regulator.c b/drivers/regulator/tps68470-regulator.c
>> new file mode 100644
>> index 000000000000..9ad2d1eae8fe
>> --- /dev/null
>> +++ b/drivers/regulator/tps68470-regulator.c
>> @@ -0,0 +1,201 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +//
>> +// Regulator driver for TPS68470 PMIC
>> +//
>> +// Copyright (c) 2021 Red Hat Inc.
>> +// Copyright (C) 2018 Intel Corporation
>> +//
>> +// Authors:
>> +// Hans de Goede <hdegoede@xxxxxxxxxx>
>> +// Zaikuo Wang <zaikuo.wang@xxxxxxxxx>
>> +// Tianshu Qiu <tian.shu.qiu@xxxxxxxxx>
>> +// Jian Xu Zheng <jian.xu.zheng@xxxxxxxxx>
>> +// Yuning Pu <yuning.pu@xxxxxxxxx>
>> +// Rajmohan Mani <rajmohan.mani@xxxxxxxxx>
>> +
>> +#include <linux/clk.h>
>> +#include <linux/device.h>
>> +#include <linux/err.h>
>> +#include <linux/init.h>
>> +#include <linux/kernel.h>
>> +#include <linux/mfd/tps68470.h>
>> +#include <linux/module.h>
>> +#include <linux/platform_data/tps68470.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/regulator/driver.h>
>> +#include <linux/regulator/machine.h>
>> +
>> +struct tps68470_regulator_data {
>> + struct clk *clk;
>> +};
>> +
>> +#define TPS68470_REGULATOR(_name, _id, _ops, _n, \
>> + _vr, _vm, _er, _em, _lr, _nlr) \
>> + [TPS68470_ ## _name] = { \
>> + .name = # _name, \
>> + .id = _id, \
>> + .ops = &_ops, \
>> + .n_voltages = _n, \
>> + .type = REGULATOR_VOLTAGE, \
>> + .owner = THIS_MODULE, \
>> + .vsel_reg = _vr, \
>> + .vsel_mask = _vm, \
>> + .enable_reg = _er, \
>> + .enable_mask = _em, \
>> + .linear_ranges = _lr, \
>> + .n_linear_ranges = _nlr, \
>> + }
>> +
>> +static const struct linear_range tps68470_ldo_ranges[] = {
>> + REGULATOR_LINEAR_RANGE(875000, 0, 125, 17800),
>> +};
>> +
>> +static const struct linear_range tps68470_core_ranges[] = {
>> + REGULATOR_LINEAR_RANGE(900000, 0, 42, 25000),
>> +};
>> +
>> +static int tps68470_regulator_enable(struct regulator_dev *rdev)
>> +{
>> + struct tps68470_regulator_data *data = rdev->reg_data;
>> + int ret;
>> +
>> + /* The Core buck regulator needs the PMIC's PLL to be enabled */
>> + if (rdev->desc->id == TPS68470_CORE) {
>> + ret = clk_prepare_enable(data->clk);
>> + if (ret) {
>> + dev_err(&rdev->dev, "Error enabling TPS68470 clock\n");
>> + return ret;
>> + }
>> + }
>> +
>> + return regulator_enable_regmap(rdev);
>> +}
>> +
>> +static int tps68470_regulator_disable(struct regulator_dev *rdev)
>> +{
>> + struct tps68470_regulator_data *data = rdev->reg_data;
>> +
>> + if (rdev->desc->id == TPS68470_CORE)
>> + clk_disable_unprepare(data->clk);
>> +
>> + return regulator_disable_regmap(rdev);
>> +}
>> +
>> +/* Operations permitted on DCDCx, LDO2, LDO3 and LDO4 */
>> +static const struct regulator_ops tps68470_regulator_ops = {
>> + .is_enabled = regulator_is_enabled_regmap,
>> + .enable = tps68470_regulator_enable,
>> + .disable = tps68470_regulator_disable,
>> + .get_voltage_sel = regulator_get_voltage_sel_regmap,
>> + .set_voltage_sel = regulator_set_voltage_sel_regmap,
>> + .list_voltage = regulator_list_voltage_linear_range,
>> + .map_voltage = regulator_map_voltage_linear_range,
>> +};
>> +
>> +static const struct regulator_ops tps68470_always_on_reg_ops = {
>> + .get_voltage_sel = regulator_get_voltage_sel_regmap,
>> + .set_voltage_sel = regulator_set_voltage_sel_regmap,
>> + .list_voltage = regulator_list_voltage_linear_range,
>> + .map_voltage = regulator_map_voltage_linear_range,
>> +};
>> +
>> +static const struct regulator_desc regulators[] = {
>> + TPS68470_REGULATOR(CORE, TPS68470_CORE, tps68470_regulator_ops, 43,
>> + TPS68470_REG_VDVAL, TPS68470_VDVAL_DVOLT_MASK,
>> + TPS68470_REG_VDCTL, TPS68470_VDCTL_EN_MASK,
>> + tps68470_core_ranges, ARRAY_SIZE(tps68470_core_ranges)),
>> + TPS68470_REGULATOR(ANA, TPS68470_ANA, tps68470_regulator_ops, 126,
>> + TPS68470_REG_VAVAL, TPS68470_VAVAL_AVOLT_MASK,
>> + TPS68470_REG_VACTL, TPS68470_VACTL_EN_MASK,
>> + tps68470_ldo_ranges, ARRAY_SIZE(tps68470_ldo_ranges)),
>> + TPS68470_REGULATOR(VCM, TPS68470_VCM, tps68470_regulator_ops, 126,
>> + TPS68470_REG_VCMVAL, TPS68470_VCMVAL_VCVOLT_MASK,
>> + TPS68470_REG_VCMCTL, TPS68470_VCMCTL_EN_MASK,
>> + tps68470_ldo_ranges, ARRAY_SIZE(tps68470_ldo_ranges)),
>> + TPS68470_REGULATOR(VIO, TPS68470_VIO, tps68470_always_on_reg_ops, 126,
>> + TPS68470_REG_VIOVAL, TPS68470_VIOVAL_IOVOLT_MASK,
>> + 0, 0,
>> + tps68470_ldo_ranges, ARRAY_SIZE(tps68470_ldo_ranges)),
>> +/*
>> + * (1) This regulator must have the same voltage as VIO if S_IO LDO is used to
>> + * power a sensor/VCM which I2C is daisy chained behind the PMIC.
>> + * (2) If there is no I2C daisy chain it can be set freely.
>> + */
>
> Do we need safety checks for this ?

There really is no way to deal this condition needs to matches inside the driver,
this should be enforced by setting proper constraints on the 2 regulators where
the PMIC is used with a sensor I2C daisy chained behind it.

>
>> + TPS68470_REGULATOR(VSIO, TPS68470_VSIO, tps68470_regulator_ops, 126,
>> + TPS68470_REG_VSIOVAL, TPS68470_VSIOVAL_IOVOLT_MASK,
>> + TPS68470_REG_S_I2C_CTL, TPS68470_S_I2C_CTL_EN_MASK,
>> + tps68470_ldo_ranges, ARRAY_SIZE(tps68470_ldo_ranges)),
>> + TPS68470_REGULATOR(AUX1, TPS68470_AUX1, tps68470_regulator_ops, 126,
>> + TPS68470_REG_VAUX1VAL, TPS68470_VAUX1VAL_AUX1VOLT_MASK,
>> + TPS68470_REG_VAUX1CTL, TPS68470_VAUX1CTL_EN_MASK,
>> + tps68470_ldo_ranges, ARRAY_SIZE(tps68470_ldo_ranges)),
>> + TPS68470_REGULATOR(AUX2, TPS68470_AUX2, tps68470_regulator_ops, 126,
>> + TPS68470_REG_VAUX2VAL, TPS68470_VAUX2VAL_AUX2VOLT_MASK,
>> + TPS68470_REG_VAUX2CTL, TPS68470_VAUX2CTL_EN_MASK,
>> + tps68470_ldo_ranges, ARRAY_SIZE(tps68470_ldo_ranges)),
>> +};
>> +
>> +static int tps68470_regulator_probe(struct platform_device *pdev)
>> +{
>> + struct device *dev = &pdev->dev;
>> + struct tps68470_regulator_platform_data *pdata = dev_get_platdata(dev);
>> + struct tps68470_regulator_data *data;
>> + struct regulator_config config = { };
>> + struct regulator_dev *rdev;
>> + int i;
>> +
>> + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
>> + if (!data)
>> + return -ENOMEM;
>> +
>> + data->clk = devm_clk_get(dev, "tps68470-clk");
>> + if (IS_ERR(data->clk))
>> + return dev_err_probe(dev, PTR_ERR(data->clk), "getting tps68470-clk\n");
>> +
>> + config.dev = dev->parent;
>> + config.regmap = dev_get_drvdata(dev->parent);
>> + config.driver_data = data;
>> +
>> + for (i = 0; i < TPS68470_NUM_REGULATORS; i++) {
>> + if (pdata)
>> + config.init_data = pdata->reg_init_data[i];
>> + else
>> + config.init_data = NULL;
>> +
>> + rdev = devm_regulator_register(dev, &regulators[i], &config);
>> + if (IS_ERR(rdev))
>> + return dev_err_probe(dev, PTR_ERR(data->clk),
>
> This should be PTR_ERR(rdev).

Good catch, thanks. Fixed for v7.

Regards,

Hans


>
>> + "registering %s regulator\n",
>> + regulators[i].name);
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static struct platform_driver tps68470_regulator_driver = {
>> + .driver = {
>> + .name = "tps68470-regulator",
>> + },
>> + .probe = tps68470_regulator_probe,
>> +};
>> +
>> +/*
>> + * The ACPI tps68470 probe-ordering depends on the clk/gpio/regulator drivers
>> + * registering before the drivers for the camera-sensors which use them bind.
>> + * subsys_initcall() ensures this when the drivers are builtin.
>> + */
>> +static int __init tps68470_regulator_init(void)
>> +{
>> + return platform_driver_register(&tps68470_regulator_driver);
>> +}
>> +subsys_initcall(tps68470_regulator_init);
>> +
>> +static void __exit tps68470_regulator_exit(void)
>> +{
>> + platform_driver_unregister(&tps68470_regulator_driver);
>> +}
>> +module_exit(tps68470_regulator_exit);
>> +
>> +MODULE_ALIAS("platform:tps68470-regulator");
>> +MODULE_DESCRIPTION("TPS68470 voltage regulator driver");
>> +MODULE_LICENSE("GPL v2");
>