Re: [PATCH] net: bcmgenet: Don't claim WOL when its not available

[Peter Robinson]

On Thu, Mar 10, 2022 at 4:55 AM Jeremy Linton <jeremy.linton@xxxxxxx> wrote:
>
> Some of the bcmgenet platforms don't correctly support WOL, yet
> ethtool returns:
>
> "Supports Wake-on: gsf"
>
> which is false.
>
> Ideally if there isn't a wol_irq, or there is something else that
> keeps the device from being able to wakeup it should display:
>
> "Supports Wake-on: d"
>
> This patch checks whether the device can wakup, before using the
> hard-coded supported flags. This corrects the ethtool reporting, as
> well as the WOL configuration because ethtool verifies that the mode
> is supported before attempting it.
>
> Signed-off-by: Jeremy Linton <jeremy.linton@xxxxxxx>
Tested-by: Peter Robinson <pbrobinson@xxxxxxxxx>

This fixes the reporting of the WOL capabilities on the Raspberry Pi 4.

> ---
>  drivers/net/ethernet/broadcom/genet/bcmgenet_wol.c | 7 +++++++
>  1 file changed, 7 insertions(+)
>
> diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet_wol.c b/drivers/net/ethernet/broadcom/genet/bcmgenet_wol.c
> index e31a5a397f11..f55d9d9c01a8 100644
> --- a/drivers/net/ethernet/broadcom/genet/bcmgenet_wol.c
> +++ b/drivers/net/ethernet/broadcom/genet/bcmgenet_wol.c
> @@ -40,6 +40,13 @@
>  void bcmgenet_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
>  {
>         struct bcmgenet_priv *priv = netdev_priv(dev);
> +       struct device *kdev = &priv->pdev->dev;
> +
> +       if (!device_can_wakeup(kdev)) {
> +               wol->supported = 0;
> +               wol->wolopts = 0;
> +               return;
> +       }
>
>         wol->supported = WAKE_MAGIC | WAKE_MAGICSECURE | WAKE_FILTER;
>         wol->wolopts = priv->wolopts;
> --
> 2.35.1
>