[PATCH] wifi: ath10k: Trigger STA disconnect after reconfig complete on hardware restart

From: Youghandhar Chintala
Date: Thu May 18 2023 - 06:16:55 EST


Currently, on WCN3990, the station disconnect after hardware recovery is
not working as expected. This is because of setting the
IEEE80211_SDATA_DISCONNECT_HW_RESTART flag very early in the hardware
recovery process even before the driver invokes ieee80211_hw_restart().
On the contrary, mac80211 expects this flag to be set after
ieee80211_hw_restart() is invoked for it to trigger station disconnect.

Set the IEEE80211_SDATA_DISCONNECT_HW_RESTART flag in
ath10k_reconfig_complete() instead to fix this.

The other targets are not affected by this change, since the hardware
params flag is not set.

Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.3.2.2.c10-00754-QCAHLSWMTPL-1

Fixes: 2c3fc50591ff ("ath10k: Trigger sta disconnect on hardware restart")
Signed-off-by: Youghandhar Chintala <quic_youghand@xxxxxxxxxxx>
---
drivers/net/wireless/ath/ath10k/core.c | 9 ---------
drivers/net/wireless/ath/ath10k/mac.c | 8 ++++++++
2 files changed, 8 insertions(+), 9 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index 533ed7169e11..6cdb225b7eac 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -2504,7 +2504,6 @@ EXPORT_SYMBOL(ath10k_core_napi_sync_disable);
static void ath10k_core_restart(struct work_struct *work)
{
struct ath10k *ar = container_of(work, struct ath10k, restart_work);
- struct ath10k_vif *arvif;
int ret;

set_bit(ATH10K_FLAG_CRASH_FLUSH, &ar->dev_flags);
@@ -2543,14 +2542,6 @@ static void ath10k_core_restart(struct work_struct *work)
ar->state = ATH10K_STATE_RESTARTING;
ath10k_halt(ar);
ath10k_scan_finish(ar);
- if (ar->hw_params.hw_restart_disconnect) {
- list_for_each_entry(arvif, &ar->arvifs, list) {
- if (arvif->is_up &&
- arvif->vdev_type == WMI_VDEV_TYPE_STA)
- ieee80211_hw_restart_disconnect(arvif->vif);
- }
- }
-
ieee80211_restart_hw(ar->hw);
break;
case ATH10K_STATE_OFF:
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 9c4bf2fdbc0f..ab12e3e0c515 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -8109,6 +8109,7 @@ static void ath10k_reconfig_complete(struct ieee80211_hw *hw,
enum ieee80211_reconfig_type reconfig_type)
{
struct ath10k *ar = hw->priv;
+ struct ath10k_vif *arvif;

if (reconfig_type != IEEE80211_RECONFIG_TYPE_RESTART)
return;
@@ -8123,6 +8124,13 @@ static void ath10k_reconfig_complete(struct ieee80211_hw *hw,
ar->state = ATH10K_STATE_ON;
ieee80211_wake_queues(ar->hw);
clear_bit(ATH10K_FLAG_RESTARTING, &ar->dev_flags);
+ if (ar->hw_params.hw_restart_disconnect) {
+ list_for_each_entry(arvif, &ar->arvifs, list) {
+ if (arvif->is_up && arvif->vdev_type == WMI_VDEV_TYPE_STA)
+ ieee80211_hw_restart_disconnect(arvif->vif);
+ }
+ }
+
}

mutex_unlock(&ar->conf_mutex);
--
2.38.0