Re: [PATCH 6/7] Input: libps2 - introduce common interrupt handler

[Raul E Rangel]

On Thu, May 11, 2023 at 11:52:46AM -0700, Dmitry Torokhov wrote:
> Instead of exposing inner workings of libps2 to drivers such as atkbd and
> psmouse, have them define pre-receive and receive callbacks, and provide a
> common handler that can be used with underlying serio port.
> 
> While at this add kerneldoc to the module.
> 
> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
> ---
>  drivers/input/keyboard/atkbd.c     |  73 +++++-----
>  drivers/input/mouse/psmouse-base.c |  53 +++----
>  drivers/input/serio/libps2.c       | 226 ++++++++++++++++++++---------
>  include/linux/libps2.h             |  61 +++++---
>  4 files changed, 259 insertions(+), 154 deletions(-)
> 
> diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c
> index 2fb2ad73e796..8ef663a589b3 100644
> --- a/drivers/input/keyboard/atkbd.c
> +++ b/drivers/input/keyboard/atkbd.c
> @@ -398,47 +398,49 @@ static unsigned int atkbd_compat_scancode(struct atkbd *atkbd, unsigned int code
>  	return code;
>  }
>  
> -/*
> - * atkbd_interrupt(). Here takes place processing of data received from
> - * the keyboard into events.
> - */
> -
> -static irqreturn_t atkbd_interrupt(struct serio *serio, unsigned char data,
> -				   unsigned int flags)
> +static enum ps2_disposition atkbd_pre_receive_byte(struct ps2dev *ps2dev,
> +						   u8 data, unsigned int flags)
>  {
> -	struct atkbd *atkbd = atkbd_from_serio(serio);
> -	struct input_dev *dev = atkbd->dev;
> -	unsigned int code = data;
> -	int scroll = 0, hscroll = 0, click = -1;
> -	int value;
> -	unsigned short keycode;
> +	struct serio *serio = ps2dev->serio;
>  
>  	dev_dbg(&serio->dev, "Received %02x flags %02x\n", data, flags);
>  
>  #if !defined(__i386__) && !defined (__x86_64__)
> -	if ((flags & (SERIO_FRAME | SERIO_PARITY)) && (~flags & SERIO_TIMEOUT) && !atkbd->resend && atkbd->write) {
> -		dev_warn(&serio->dev, "Frame/parity error: %02x\n", flags);
> -		serio_write(serio, ATKBD_CMD_RESEND);
> -		atkbd->resend = true;
> -		goto out;
> +	if ((flags & (SERIO_FRAME | SERIO_PARITY)) &&
> +	    (~flags & SERIO_TIMEOUT)) {
> +		struct atkbd *atkbd = container_of(ps2dev, struct atkbd,
> +						   ps2dev);
> +
> +		if (!atkbd->resend && atkbd->write) {
> +			dev_warn(&serio->dev,
> +				 "Frame/parity error: %02x\n", flags);
> +			serio_write(serio, ATKBD_CMD_RESEND);
> +			atkbd->resend = true;
> +			return PS2_IGNORE;
> +		}
>  	}
>  
>  	if (!flags && data == ATKBD_RET_ACK)
>  		atkbd->resend = false;
>  #endif
>  
> -	if (unlikely(atkbd->ps2dev.flags & PS2_FLAG_ACK))
> -		if  (ps2_handle_ack(&atkbd->ps2dev, data))
> -			goto out;
> +	return PS2_PROCESS;
> +}
>  
> -	if (unlikely(atkbd->ps2dev.flags & PS2_FLAG_CMD))
> -		if  (ps2_handle_response(&atkbd->ps2dev, data))
> -			goto out;
> +static void atkbd_receive_byte(struct ps2dev *ps2dev, u8 data)
> +{
> +	struct serio *serio = ps2dev->serio;
> +	struct atkbd *atkbd = container_of(ps2dev, struct atkbd, ps2dev);
> +	struct input_dev *dev = atkbd->dev;
> +	unsigned int code = data;
> +	int scroll = 0, hscroll = 0, click = -1;
> +	int value;
> +	unsigned short keycode;
>  
>  	pm_wakeup_event(&serio->dev, 0);
>  
>  	if (!atkbd->enabled)
> -		goto out;
> +		return;
>  
>  	input_event(dev, EV_MSC, MSC_RAW, code);
>  
> @@ -460,16 +462,16 @@ static irqreturn_t atkbd_interrupt(struct serio *serio, unsigned char data,
>  	case ATKBD_RET_BAT:
>  		atkbd->enabled = false;
>  		serio_reconnect(atkbd->ps2dev.serio);
> -		goto out;
> +		return;
>  	case ATKBD_RET_EMUL0:
>  		atkbd->emul = 1;
> -		goto out;
> +		return;
>  	case ATKBD_RET_EMUL1:
>  		atkbd->emul = 2;
> -		goto out;
> +		return;
>  	case ATKBD_RET_RELEASE:
>  		atkbd->release = true;
> -		goto out;
> +		return;
>  	case ATKBD_RET_ACK:
>  	case ATKBD_RET_NAK:
>  		if (printk_ratelimit())
> @@ -477,18 +479,18 @@ static irqreturn_t atkbd_interrupt(struct serio *serio, unsigned char data,
>  				 "Spurious %s on %s. "
>  				 "Some program might be trying to access hardware directly.\n",
>  				 data == ATKBD_RET_ACK ? "ACK" : "NAK", serio->phys);
> -		goto out;
> +		return;
>  	case ATKBD_RET_ERR:
>  		atkbd->err_count++;
>  		dev_dbg(&serio->dev, "Keyboard on %s reports too many keys pressed.\n",
>  			serio->phys);
> -		goto out;
> +		return;
>  	}
>  
>  	code = atkbd_compat_scancode(atkbd, code);
>  
>  	if (atkbd->emul && --atkbd->emul)
> -		goto out;
> +		return;
>  
>  	keycode = atkbd->keycode[code];
>  
> @@ -564,8 +566,6 @@ static irqreturn_t atkbd_interrupt(struct serio *serio, unsigned char data,
>  	}
>  
>  	atkbd->release = false;
> -out:
> -	return IRQ_HANDLED;
>  }
>  
>  static int atkbd_set_repeat_rate(struct atkbd *atkbd)
> @@ -1229,7 +1229,8 @@ static int atkbd_connect(struct serio *serio, struct serio_driver *drv)
>  		goto fail1;
>  
>  	atkbd->dev = dev;
> -	ps2_init(&atkbd->ps2dev, serio);
> +	ps2_init(&atkbd->ps2dev, serio,
> +		 atkbd_pre_receive_byte, atkbd_receive_byte);
>  	INIT_DELAYED_WORK(&atkbd->event_work, atkbd_event_work);
>  	mutex_init(&atkbd->mutex);
>  
> @@ -1385,7 +1386,7 @@ static struct serio_driver atkbd_drv = {
>  	},
>  	.description	= DRIVER_DESC,
>  	.id_table	= atkbd_serio_ids,
> -	.interrupt	= atkbd_interrupt,
> +	.interrupt	= ps2_interrupt,
>  	.connect	= atkbd_connect,
>  	.reconnect	= atkbd_reconnect,
>  	.disconnect	= atkbd_disconnect,
> diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c
> index ed5376099fba..a0aac76b1e41 100644
> --- a/drivers/input/mouse/psmouse-base.c
> +++ b/drivers/input/mouse/psmouse-base.c
> @@ -336,17 +336,14 @@ static void psmouse_handle_oob_data(struct psmouse *psmouse, u8 data)
>  	}
>  }
>  
> -/*
> - * psmouse_interrupt() handles incoming characters, either passing them
> - * for normal processing or gathering them as command response.
> - */
> -static irqreturn_t psmouse_interrupt(struct serio *serio,
> -				     u8 data, unsigned int flags)
> +static enum ps2_disposition psmouse_pre_receive_byte(struct ps2dev *ps2dev,
> +						     u8 data,
> +						     unsigned int flags)
>  {
> -	struct psmouse *psmouse = psmouse_from_serio(serio);
> +	struct psmouse *psmouse = container_of(ps2dev, struct psmouse, ps2dev);
>  
>  	if (psmouse->state == PSMOUSE_IGNORE)
> -		goto out;
> +		return PS2_IGNORE;
>  
>  	if (unlikely((flags & SERIO_TIMEOUT) ||
>  		     ((flags & SERIO_PARITY) &&
> @@ -357,27 +354,25 @@ static irqreturn_t psmouse_interrupt(struct serio *serio,
>  				     "bad data from KBC -%s%s\n",
>  				     flags & SERIO_TIMEOUT ? " timeout" : "",
>  				     flags & SERIO_PARITY ? " bad parity" : "");
> -		ps2_cmd_aborted(&psmouse->ps2dev);
> -		goto out;
> +		return PS2_ERROR;
>  	}
>  
>  	if (flags & SERIO_OOB_DATA) {
>  		psmouse_handle_oob_data(psmouse, data);
> -		goto out;
> +		return PS2_IGNORE;
>  	}
>  
> -	if (unlikely(psmouse->ps2dev.flags & PS2_FLAG_ACK))
> -		if  (ps2_handle_ack(&psmouse->ps2dev, data))
> -			goto out;
> +	return PS2_PROCESS;
> +}
>  
> -	if (unlikely(psmouse->ps2dev.flags & PS2_FLAG_CMD))
> -		if  (ps2_handle_response(&psmouse->ps2dev, data))
> -			goto out;
> +static void psmouse_receive_byte(struct ps2dev *ps2dev, u8 data)
> +{
> +	struct psmouse *psmouse = container_of(ps2dev, struct psmouse, ps2dev);
>  
> -	pm_wakeup_event(&serio->dev, 0);
> +	pm_wakeup_event(&ps2dev->serio->dev, 0);
>  
>  	if (psmouse->state <= PSMOUSE_RESYNCING)
> -		goto out;
> +		return;
>  
>  	if (psmouse->state == PSMOUSE_ACTIVATED &&
>  	    psmouse->pktcnt && time_after(jiffies, psmouse->last + HZ/2)) {
> @@ -386,7 +381,7 @@ static irqreturn_t psmouse_interrupt(struct serio *serio,
>  		psmouse->badbyte = psmouse->packet[0];
>  		__psmouse_set_state(psmouse, PSMOUSE_RESYNCING);
>  		psmouse_queue_work(psmouse, &psmouse->resync_work, 0);
> -		goto out;
> +		return;
>  	}
>  
>  	psmouse->packet[psmouse->pktcnt++] = data;
> @@ -395,21 +390,21 @@ static irqreturn_t psmouse_interrupt(struct serio *serio,
>  	if (unlikely(psmouse->packet[0] == PSMOUSE_RET_BAT && psmouse->pktcnt <= 2)) {
>  		if (psmouse->pktcnt == 1) {
>  			psmouse->last = jiffies;
> -			goto out;
> +			return;
>  		}
>  
>  		if (psmouse->packet[1] == PSMOUSE_RET_ID ||
>  		    (psmouse->protocol->type == PSMOUSE_HGPK &&
>  		     psmouse->packet[1] == PSMOUSE_RET_BAT)) {
>  			__psmouse_set_state(psmouse, PSMOUSE_IGNORE);
> -			serio_reconnect(serio);
> -			goto out;
> +			serio_reconnect(ps2dev->serio);
> +			return;
>  		}
>  
>  		/* Not a new device, try processing first byte normally */
>  		psmouse->pktcnt = 1;
>  		if (psmouse_handle_byte(psmouse))
> -			goto out;
> +			return;
>  
>  		psmouse->packet[psmouse->pktcnt++] = data;
>  	}
> @@ -424,14 +419,11 @@ static irqreturn_t psmouse_interrupt(struct serio *serio,
>  		psmouse->badbyte = psmouse->packet[0];
>  		__psmouse_set_state(psmouse, PSMOUSE_RESYNCING);
>  		psmouse_queue_work(psmouse, &psmouse->resync_work, 0);
> -		goto out;
> +		return;
>  	}
>  
>  	psmouse->last = jiffies;
>  	psmouse_handle_byte(psmouse);
> -
> - out:
> -	return IRQ_HANDLED;
>  }
>  
>  /*
> @@ -1604,7 +1596,8 @@ static int psmouse_connect(struct serio *serio, struct serio_driver *drv)
>  	if (!psmouse || !input_dev)
>  		goto err_free;
>  
> -	ps2_init(&psmouse->ps2dev, serio);
> +	ps2_init(&psmouse->ps2dev, serio,
> +		 psmouse_pre_receive_byte, psmouse_receive_byte);
>  	INIT_DELAYED_WORK(&psmouse->resync_work, psmouse_resync);
>  	psmouse->dev = input_dev;
>  	snprintf(psmouse->phys, sizeof(psmouse->phys), "%s/input0", serio->phys);
> @@ -1786,7 +1779,7 @@ static struct serio_driver psmouse_drv = {
>  	},
>  	.description	= DRIVER_DESC,
>  	.id_table	= psmouse_serio_ids,
> -	.interrupt	= psmouse_interrupt,
> +	.interrupt	= ps2_interrupt,
>  	.connect	= psmouse_connect,
>  	.reconnect	= psmouse_reconnect,
>  	.fast_reconnect	= psmouse_fast_reconnect,
> diff --git a/drivers/input/serio/libps2.c b/drivers/input/serio/libps2.c
> index 09eb605364bb..7c5fc853072a 100644
> --- a/drivers/input/serio/libps2.c
> +++ b/drivers/input/serio/libps2.c
> @@ -19,9 +19,22 @@
>  
>  #define DRIVER_DESC	"PS/2 driver library"
>  
> -MODULE_AUTHOR("Dmitry Torokhov <dtor@xxxxxxx>");
> -MODULE_DESCRIPTION("PS/2 driver library");
> -MODULE_LICENSE("GPL");
> +#define PS2_CMD_SETSCALE11	0x00e6
> +#define PS2_CMD_SETRES		0x10e8
> +#define PS2_CMD_GETID		0x02f2
> +#define PS2_CMD_RESET_BAT	0x02ff
> +
> +#define PS2_RET_BAT		0xaa
> +#define PS2_RET_ID		0x00
> +#define PS2_RET_ACK		0xfa
> +#define PS2_RET_NAK		0xfe
> +#define PS2_RET_ERR		0xfc
> +
> +#define PS2_FLAG_ACK		BIT(0)	/* Waiting for ACK/NAK */
> +#define PS2_FLAG_CMD		BIT(1)	/* Waiting for a command to finish */
> +#define PS2_FLAG_CMD1		BIT(2)	/* Waiting for the first byte of command response */
> +#define PS2_FLAG_WAITID		BIT(3)	/* Command executing is GET ID */
> +#define PS2_FLAG_NAK		BIT(4)	/* Last transmission was NAKed */
>  
>  static int ps2_do_sendbyte(struct ps2dev *ps2dev, u8 byte,
>  			   unsigned int timeout, unsigned int max_attempts)
> @@ -76,14 +89,17 @@ static int ps2_do_sendbyte(struct ps2dev *ps2dev, u8 byte,
>  	return error;
>  }
>  
> -/*
> - * ps2_sendbyte() sends a byte to the device and waits for acknowledge.
> - * It doesn't handle retransmission, the caller is expected to handle
> +/**
> + * ps2_sendbyte - sends a byte to the device and wait for acknowledgement
> + * @ps2dev: a PS/2 device to send the data to
> + * @byte: data to be sent to the device
> + * @timeout: timeout for sending the data and receiving an acknowledge
> + *
> + * The function doesn't handle retransmission, the caller is expected to handle
>   * it when needed.
>   *
>   * ps2_sendbyte() can only be called from a process context.
>   */
> -
>  int ps2_sendbyte(struct ps2dev *ps2dev, u8 byte, unsigned int timeout)
>  {
>  	int retval;
> @@ -99,6 +115,13 @@ int ps2_sendbyte(struct ps2dev *ps2dev, u8 byte, unsigned int timeout)
>  }
>  EXPORT_SYMBOL(ps2_sendbyte);
>  
> +/**
> + * ps2_begin_command - mark beginning of execution of a complex command
> + * @ps2dev: a PS/2 device executing the command
> + *
> + * Serializes a complex/compound command. Once command is finished
> + * ps2_end_command() should be called.
> + */
>  void ps2_begin_command(struct ps2dev *ps2dev)
>  {
>  	struct mutex *m = ps2dev->serio->ps2_cmd_mutex ?: &ps2dev->cmd_mutex;
> @@ -107,6 +130,10 @@ void ps2_begin_command(struct ps2dev *ps2dev)
>  }
>  EXPORT_SYMBOL(ps2_begin_command);
>  
> +/**
> + * ps2_end_command - mark end of execution of a complex command
> + * @ps2dev: a PS/2 device executing the command
> + */
>  void ps2_end_command(struct ps2dev *ps2dev)
>  {
>  	struct mutex *m = ps2dev->serio->ps2_cmd_mutex ?: &ps2dev->cmd_mutex;
> @@ -115,11 +142,13 @@ void ps2_end_command(struct ps2dev *ps2dev)
>  }
>  EXPORT_SYMBOL(ps2_end_command);
>  
> -/*
> - * ps2_drain() waits for device to transmit requested number of bytes
> - * and discards them.
> +/**
> + * ps2_drain - waits for device to transmit requested number of bytes
> + * and discards them
> + * @ps2dev: the PS/2 device that should be drained
> + * @maxbytes: maximum number of bytes to be drained
> + * @timeout: time to drain the device
>   */
> -
>  void ps2_drain(struct ps2dev *ps2dev, size_t maxbytes, unsigned int timeout)
>  {
>  	if (maxbytes > sizeof(ps2dev->cmdbuf)) {
> @@ -142,11 +171,11 @@ void ps2_drain(struct ps2dev *ps2dev, size_t maxbytes, unsigned int timeout)
>  }
>  EXPORT_SYMBOL(ps2_drain);
>  
> -/*
> - * ps2_is_keyboard_id() checks received ID byte against the list of
> - * known keyboard IDs.
> +/**
> + * ps2_is_keyboard_id - checks received ID byte against the list of
> + *   known keyboard IDs
> + * @id_byte: data byte that should be checked
>   */
> -
>  bool ps2_is_keyboard_id(u8 id_byte)
>  {
>  	static const u8 keyboard_ids[] = {
> @@ -167,7 +196,6 @@ EXPORT_SYMBOL(ps2_is_keyboard_id);
>   * response and tries to reduce remaining timeout to speed up command
>   * completion.
>   */
> -
>  static int ps2_adjust_timeout(struct ps2dev *ps2dev,
>  			      unsigned int command, unsigned int timeout)
>  {
> @@ -217,13 +245,19 @@ static int ps2_adjust_timeout(struct ps2dev *ps2dev,
>  	return timeout;
>  }
>  
> -/*
> - * ps2_command() sends a command and its parameters to the mouse,
> - * then waits for the response and puts it in the param array.
> +/**
> + * __ps2_command - send a command to PS/2 device
> + * @ps2dev: the PS/2 device that should execute the command
> + * @param: a buffer containing parameters to be sent along with the command,
> + *   or place where the results of the command execution will be deposited,
> + *   or both
> + * @command: command word that encodes the command itself, as well as number of
> + *   additional parameter bytes that should be sent to the device and expected
> + *   length of the command response
>   *
> - * ps2_command() can only be called from a process context
> + * Not serialized. Callers should use ps2_begin_command() and ps2_end_command()
> + * to ensure proper serialization for complex commands.
>   */
> -
>  int __ps2_command(struct ps2dev *ps2dev, u8 *param, unsigned int command)
>  {
>  	unsigned int timeout;
> @@ -327,6 +361,20 @@ int __ps2_command(struct ps2dev *ps2dev, u8 *param, unsigned int command)
>  }
>  EXPORT_SYMBOL(__ps2_command);
>  
> +/**
> + * ps2_command - send a command to PS/2 device
> + * @ps2dev: the PS/2 device that should execute the command
> + * @param: a buffer containing parameters to be sent along with the command,
> + *   or place where the results of the command execution will be deposited,
> + *   or both
> + * @command: command word that encodes the command itself, as well as number of
> + *   additional parameter bytes that should be sent to the device and expected
> + *   length of the command response
> + *
> + * Note: ps2_command() serializes the command execution so that only one
> + * command can be executed at a time for either individual port or the entire
> + * 8042 controller.
> + */
>  int ps2_command(struct ps2dev *ps2dev, u8 *param, unsigned int command)
>  {
>  	int rc;
> @@ -339,14 +387,16 @@ int ps2_command(struct ps2dev *ps2dev, u8 *param, unsigned int command)
>  }
>  EXPORT_SYMBOL(ps2_command);
>  
> -/*
> - * ps2_sliced_command() sends an extended PS/2 command to the mouse
> - * using sliced syntax, understood by advanced devices, such as Logitech
> - * or Synaptics touchpads. The command is encoded as:
> +/**
> + * ps2_sliced_command - sends an extended PS/2 command to a mouse
> + * @ps2dev: the PS/2 device that should execute the command
> + * @command: command byte
> + *
> + * The command is sent using "sliced" syntax understood by advanced devices,
> + * such as Logitech or Synaptics touchpads. The command is encoded as:
>   * 0xE6 0xE8 rr 0xE8 ss 0xE8 tt 0xE8 uu where (rr*64)+(ss*16)+(tt*4)+uu
>   * is the command.
>   */
> -
>  int ps2_sliced_command(struct ps2dev *ps2dev, u8 command)
>  {
>  	int i;
> @@ -372,12 +422,22 @@ int ps2_sliced_command(struct ps2dev *ps2dev, u8 command)
>  }
>  EXPORT_SYMBOL(ps2_sliced_command);
>  
> -/*
> - * ps2_init() initializes ps2dev structure
> +/**
> + * ps2_init - initializes ps2dev structure
> + * @ps2dev: structure to be initialized
> + * @serio: serio port associated with the PS/2 device
> + * @pre_receive_handler: validation handler to check basic communication state
> + * @receive_handler: main protocol handler
> + *
> + * Prepares ps2dev structure for use in drivers for PS/2 devices.
>   */
> -
> -void ps2_init(struct ps2dev *ps2dev, struct serio *serio)
> +void ps2_init(struct ps2dev *ps2dev, struct serio *serio,
> +	      ps2_pre_receive_handler_t pre_receive_handler,
> +	      ps2_receive_handler_t receive_handler)
>  {
> +	ps2dev->pre_receive_handler = pre_receive_handler;
> +	ps2dev->receive_handler = receive_handler;
> +
>  	mutex_init(&ps2dev->cmd_mutex);
>  	lockdep_set_subclass(&ps2dev->cmd_mutex, serio->depth);
>  	init_waitqueue_head(&ps2dev->wait);
> @@ -387,11 +447,35 @@ void ps2_init(struct ps2dev *ps2dev, struct serio *serio)
>  EXPORT_SYMBOL(ps2_init);
>  
>  /*
> - * ps2_handle_ack() is supposed to be used in interrupt handler
> - * to properly process ACK/NAK of a command from a PS/2 device.
> + * ps2_handle_response() stores device's response to a command and notifies
> + * the process waiting for completion of the command. Note that there is a
> + * distinction between waiting for the first byte of the response, and
> + * waiting for subsequent bytes. It is done so that callers could shorten
> + * timeouts once first byte of response is received.
>   */
> +static void ps2_handle_response(struct ps2dev *ps2dev, u8 data)
> +{
> +	if (ps2dev->cmdcnt)
> +		ps2dev->cmdbuf[--ps2dev->cmdcnt] = data;
>  
> -bool ps2_handle_ack(struct ps2dev *ps2dev, u8 data)
> +	if (ps2dev->flags & PS2_FLAG_CMD1) {
> +		ps2dev->flags &= ~PS2_FLAG_CMD1;
> +		if (ps2dev->cmdcnt)
> +			wake_up(&ps2dev->wait);
> +	}
> +
> +	if (!ps2dev->cmdcnt) {
> +		ps2dev->flags &= ~PS2_FLAG_CMD;
> +		wake_up(&ps2dev->wait);
> +	}
> +}
> +
> +/*
> + * ps2_handle_ack() processes ACK/NAK of a command from a PS/2 device,
> + * possibly applying workarounds for mice not acknowledging the "get ID"
> + * command.
> + */
> +static void ps2_handle_ack(struct ps2dev *ps2dev, u8 data)
>  {
>  	switch (data) {
>  	case PS2_RET_ACK:
> @@ -436,53 +520,25 @@ bool ps2_handle_ack(struct ps2dev *ps2dev, u8 data)
>  		 */
>  		dev_dbg(&ps2dev->serio->dev, "unexpected %#02x\n", data);
>  		ps2dev->flags &= ~PS2_FLAG_WAITID;
> -		return true;
> +		return;
>  	}
>  
>  	if (!ps2dev->nak)
>  		ps2dev->flags &= ~PS2_FLAG_NAK;
>  
>  	ps2dev->flags &= ~PS2_FLAG_ACK;
> -	wake_up(&ps2dev->wait);
>  
>  	if (!ps2dev->nak && data != PS2_RET_ACK)
>  		ps2_handle_response(ps2dev, data);
> -
> -	return true;
> -}
> -EXPORT_SYMBOL(ps2_handle_ack);
> -
> -/*
> - * ps2_handle_response() is supposed to be used in interrupt handler
> - * to properly store device's response to a command and notify process
> - * waiting for completion of the command.
> - */
> -
> -bool ps2_handle_response(struct ps2dev *ps2dev, u8 data)
> -{
> -	if (ps2dev->cmdcnt)
> -		ps2dev->cmdbuf[--ps2dev->cmdcnt] = data;
> -
> -	if (ps2dev->flags & PS2_FLAG_CMD1) {
> -		ps2dev->flags &= ~PS2_FLAG_CMD1;
> -		if (ps2dev->cmdcnt)
> -			wake_up(&ps2dev->wait);
> -	}
> -
> -	if (!ps2dev->cmdcnt) {
> -		ps2dev->flags &= ~PS2_FLAG_CMD;
> +	else
>  		wake_up(&ps2dev->wait);
> -	}
> -
> -	return true;
>  }
> -EXPORT_SYMBOL(ps2_handle_response);
>  
>  /*
>   * Clears state of PS/2 device after communication error by resetting majority
>   * of flags and waking up waiters, if any.
>   */
> -void ps2_cmd_aborted(struct ps2dev *ps2dev)
> +static void ps2_cleanup(struct ps2dev *ps2dev)
>  {
>  	unsigned long old_flags = ps2dev->flags;
>  
> @@ -494,6 +550,46 @@ void ps2_cmd_aborted(struct ps2dev *ps2dev)
>  
>  	if (old_flags & (PS2_FLAG_ACK | PS2_FLAG_CMD))
>  		wake_up(&ps2dev->wait);
> +}
>  
> +/**
> + * ps2_interrupt - common interrupt handler for PS/2 devices
> + * @serio: serio port for the device
> + * @data: a data byte received from the device
> + * @flags: flags such as %SERIO_PARITY or %SERIO_TIMEOUT indicating state of
> + *   the data transfer
> + *
> + * ps2_interrupt() invokes pre-receive handler, optionally handles command
> + * acknowledgement and response from the device, and finally passes the data
> + * to the main protocol handler for future processing.
> + */
> +irqreturn_t ps2_interrupt(struct serio *serio, u8 data, unsigned int flags) {
> +	struct ps2dev *ps2dev = serio_get_drvdata(serio);
> +	enum ps2_disposition rc;
> +
> +	rc = ps2dev->pre_receive_handler(ps2dev, data, flags);
> +	switch (rc) {
> +	case PS2_ERROR:
> +		ps2_cleanup(ps2dev);
> +		break;
> +
> +	case PS2_IGNORE:
> +		break;
> +
> +	case PS2_PROCESS:
> +		if (ps2dev->flags & PS2_FLAG_ACK)
> +			ps2_handle_ack(ps2dev, data);
> +		else if (ps2dev->flags & PS2_FLAG_CMD)
> +			ps2_handle_response(ps2dev, data);
> +		else
> +			ps2dev->receive_handler(ps2dev, data);
> +		break;
> +	}
> +
> +	return IRQ_HANDLED;
>  }
> -EXPORT_SYMBOL(ps2_cmd_aborted);
> +EXPORT_SYMBOL(ps2_interrupt);
> +
> +MODULE_AUTHOR("Dmitry Torokhov <dtor@xxxxxxx>");
> +MODULE_DESCRIPTION("PS/2 driver library");
> +MODULE_LICENSE("GPL");
> diff --git a/include/linux/libps2.h b/include/linux/libps2.h
> index 193dd53ad18b..9ca9ce4e6e64 100644
> --- a/include/linux/libps2.h
> +++ b/include/linux/libps2.h
> @@ -8,43 +8,59 @@
>   */
>  
>  #include <linux/bitops.h>
> +#include <linux/interrupt.h>
>  #include <linux/mutex.h>
>  #include <linux/types.h>
>  #include <linux/wait.h>
>  
> -#define PS2_CMD_SETSCALE11	0x00e6
> -#define PS2_CMD_SETRES		0x10e8
> -#define PS2_CMD_GETID		0x02f2
> -#define PS2_CMD_RESET_BAT	0x02ff
> +struct ps2dev;
>  
> -#define PS2_RET_BAT		0xaa
> -#define PS2_RET_ID		0x00
> -#define PS2_RET_ACK		0xfa
> -#define PS2_RET_NAK		0xfe
> -#define PS2_RET_ERR		0xfc
> +/**
> + * enum ps2_disposition - indicates how received byte should be handled
> + * @PS2_PROCESS: pass to the main protocol handler, process normally
> + * @PS2_IGNORE: skip the byte
> + * @PS2_ERROR: do not process the byte, abort command in progress
> + */
> +enum ps2_disposition {
> +	PS2_PROCESS,
> +	PS2_IGNORE,
> +	PS2_ERROR,
> +};
>  
> -#define PS2_FLAG_ACK		BIT(0)	/* Waiting for ACK/NAK */
> -#define PS2_FLAG_CMD		BIT(1)	/* Waiting for a command to finish */
> -#define PS2_FLAG_CMD1		BIT(2)	/* Waiting for the first byte of command response */
> -#define PS2_FLAG_WAITID		BIT(3)	/* Command executing is GET ID */
> -#define PS2_FLAG_NAK		BIT(4)	/* Last transmission was NAKed */
> +typedef enum ps2_disposition (*ps2_pre_receive_handler_t)(struct ps2dev *, u8,
> +							  unsigned int);
> +typedef void (*ps2_receive_handler_t)(struct ps2dev *, u8);
>  
> +/**
> + * struct ps2dev - represents a device using PS/2 protocol
> + * @serio: a serio port used by the PS/2 device
> + * @cmd_mutex: a mutex ensuring that only one command is executing at a time
> + * @wait: a waitqueue used to signal completion from the serio interrupt handler
> + * @flags: various internal flags indicating stages of PS/2 command execution
> + * @cmdbuf: buffer holding command response
> + * @cmdcnt: outstanding number of bytes of the command response
> + * @nak: a byte transmitted by the device when it refuses command
> + * @pre_receive_handler: checks communication errors and returns disposition
> + * (&enum ps2_disposition) of the received data byte
> + * @receive_handler: main handler of particular PS/2 protocol, such as keyboard
> + *   or mouse protocol
> + */
>  struct ps2dev {
>  	struct serio *serio;
> -
> -	/* Ensures that only one command is executing at a time */
>  	struct mutex cmd_mutex;
> -
> -	/* Used to signal completion from interrupt handler */
>  	wait_queue_head_t wait;
> -
>  	unsigned long flags;
>  	u8 cmdbuf[8];
>  	u8 cmdcnt;
>  	u8 nak;
> +
> +	ps2_pre_receive_handler_t pre_receive_handler;
> +	ps2_receive_handler_t receive_handler;
>  };
>  
> -void ps2_init(struct ps2dev *ps2dev, struct serio *serio);
> +void ps2_init(struct ps2dev *ps2dev, struct serio *serio,
> +	      ps2_pre_receive_handler_t pre_receive_handler,
> +	      ps2_receive_handler_t receive_handler);
>  int ps2_sendbyte(struct ps2dev *ps2dev, u8 byte, unsigned int timeout);
>  void ps2_drain(struct ps2dev *ps2dev, size_t maxbytes, unsigned int timeout);
>  void ps2_begin_command(struct ps2dev *ps2dev);
> @@ -52,9 +68,8 @@ void ps2_end_command(struct ps2dev *ps2dev);
>  int __ps2_command(struct ps2dev *ps2dev, u8 *param, unsigned int command);
>  int ps2_command(struct ps2dev *ps2dev, u8 *param, unsigned int command);
>  int ps2_sliced_command(struct ps2dev *ps2dev, u8 command);
> -bool ps2_handle_ack(struct ps2dev *ps2dev, u8 data);
> -bool ps2_handle_response(struct ps2dev *ps2dev, u8 data);
> -void ps2_cmd_aborted(struct ps2dev *ps2dev);
>  bool ps2_is_keyboard_id(u8 id);
>  
> +irqreturn_t ps2_interrupt(struct serio *serio, u8 data, unsigned int flags);
> +
>  #endif /* _LIBPS2_H */
Reviewed-by: Raul E Rangel <rrangel@xxxxxxxxxxxx>