Re: [PATCH V7 0/6] drm: bridge: samsung-dsim: Support variable clocking
From: Fabio Estevam
Date: Thu May 18 2023 - 20:29:55 EST
Hi Adam,
On Thu, May 18, 2023 at 8:06 PM Adam Ford <aford173@xxxxxxxxx> wrote:
>
> This series fixes the blanking pack size and the PMS calculation. It then
> adds support to allows the DSIM to dynamically DPHY clocks, and support
> non-burst mode while allowing the removal of the hard-coded clock values
> for the PLL for imx8m mini/nano/plus, and it allows the removal of the
> burst-clock device tree entry when burst-mode isn't supported by connected
> devices like an HDMI brige. In that event, the HS clock is set to the
> value requested by the bridge chip.
>
> This has been tested on both an i.MX8M Nano and i.MX8M Plus, and should
> work on i.MX8M Mini as well. Marek Szyprowski has tested it on various
> Exynos boards.
>
> Adam Ford (5):
> drm: bridge: samsung-dsim: Fix PMS Calculator on imx8m[mnp]
> drm: bridge: samsung-dsim: Fetch pll-clock-frequency automatically
> drm: bridge: samsung-dsim: Select GENERIC_PHY_MIPI_DPHY
> drm: bridge: samsung-dsim: Dynamically configure DPHY timing
> drm: bridge: samsung-dsim: Support non-burst mode
>
> Lucas Stach (1):
> drm: bridge: samsung-dsim: fix blanking packet size calculation
>
> drivers/gpu/drm/bridge/Kconfig | 1 +
> drivers/gpu/drm/bridge/samsung-dsim.c | 142 +++++++++++++++++++++-----
> include/drm/bridge/samsung-dsim.h | 4 +
> 3 files changed, 124 insertions(+), 23 deletions(-)
>
> V7: Move messages indicating the optional device tree items are going
> to be automatically read elsewhere was move to dev_dbg instead of
> dev_info. Cleaned up some of the comments to be a bit more clear.
> Eliminated a double variable assignement accidentally introduced
> in V6 when some of the items were moved from patch 6 to patch 5.
It seems you missed addressing one previous comment from Lucas:
"Same as with the earlier patch, this needs to be documented in the DT
binding by moving "samsung,burst-clock-frequency" to be a optional
property."