[PATCH v1 3/3] dt-bindings: phy: realtek: Add the doc about the Realtek SoC USB 2.0/3.0 PHY

From: Stanley Chang
Date: Fri May 19 2023 - 01:00:27 EST

Next message: Stanley Chang: "[PATCH v1 1/3] usb: phy: add usb phy notify port status API"
Previous message: Finn Thain: "Re: [PATCH 02/11] Docs/scsi: introduction: multiple cleanups"
In reply to: Stanley Chang: "[PATCH v1 1/3] usb: phy: add usb phy notify port status API"
Next in thread: Stanley Chang: "[PATCH v1 2/3] usb: phy: Add driver for the Realtek SoC USB 2.0/3.0 PHY"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

From: stanley_chang <stanley_chang@xxxxxxxxxxx>

Two documentations explain the property about realtek USB PHY drivers.

Realtek DHC (digital home center) RTD SoCs support DWC3 XHCI USB 2.0/3.0
controller. Added two drivers to drive the USB 2.0/3.0 PHY transceivers.
For USB 3.0 transceivers, a driver phy-rtk-usb3 is provided.
The driver phy-rtk-usb2 is used to support USB 2.0 transceivers.

Signed-off-by: Stanley Chang <stanley_chang@xxxxxxxxxxx>
---
.../bindings/phy/realtek,usb2phy.yaml | 249 ++++++++++++++++++
.../bindings/phy/realtek,usb3phy.yaml | 195 ++++++++++++++
2 files changed, 444 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/realtek,usb2phy.yaml
create mode 100644 Documentation/devicetree/bindings/phy/realtek,usb3phy.yaml

diff --git a/Documentation/devicetree/bindings/phy/realtek,usb2phy.yaml b/Documentation/devicetree/bindings/phy/realtek,usb2phy.yaml
new file mode 100644
index 000000000000..47ffdf308f27
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/realtek,usb2phy.yaml
@@ -0,0 +1,249 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2023 Realtek Semiconductor Corporation
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/realtek,usb2phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Realtek DHC SoCs USB2 PHY
+
+maintainers:
+ - Stanley Chang <stanley_chang@xxxxxxxxxxx>
+
+description: |
+ Realtek USB 2.0 PHY support the digital home center (DHC) RTD series SoCs.
+
+properties:
+ compatible:
+ enum:
+ - realtek,usb2phy
+ - realtek,rtd-usb2phy
+ - realtek,rtd1295-usb2phy
+ - realtek,rtd1395-usb2phy
+ - realtek,rtd1619-usb2phy
+ - realtek,rtd1319-usb2phy
+ - realtek,rtd1619b-usb2phy
+ - realtek,rtd1312c-usb2phy
+ - realtek,rtd1319d-usb2phy
+ - realtek,rtd1315e-usb2phy
+
+ reg:
+ items:
+ - description: PHY data registers
+ - description: PHY control registers
+
+ realtek,usb:
+ description: The phandler of realtek dwc3 node
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+ realtek,mac:
+ description: The phandler of dwc3 node
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+ realtek,usb_ctrl:
+ description: The phandler of usb power control node
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+ realtek,port-index:
+ description: The index of USB 2.0 PHY
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ realtek,phyN:
+ description: The total amount of USB 2.0 PHY
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ phy0:
+ description: The child node of PHY for the parameter v1.
+ type: object
+ properties:
+ realtek,phy-data-page0-size:
+ description: PHY data page 0 size
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ realtek,phy-data-page0-addr:
+ description: PHY data page 0 address
+ $ref: /schemas/types.yaml#/definitions/uint8-array
+
+ realtek,phy-data-page0-A00:
+ description: PHY data page 0 value
+ $ref: /schemas/types.yaml#/definitions/uint8-array
+
+ realtek,phy-data-page1-size:
+ description: PHY data page 1 size
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ realtek,phy-data-page1-addr:
+ description: PHY data page 1 address
+ $ref: /schemas/types.yaml#/definitions/uint8-array
+
+ realtek,phy-data-page1-A00:
+ description: PHY data page 1 value
+ $ref: /schemas/types.yaml#/definitions/uint8-array
+
+ realtek,phy-data-page2-size:
+ description: PHY data page 2 size
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ realtek,phy-data-page2-addr:
+ description: PHY data page 2 address
+ $ref: /schemas/types.yaml#/definitions/uint8-array
+
+ realtek,phy-data-page2-A00:
+ description: PHY data page 2 value
+ $ref: /schemas/types.yaml#/definitions/uint8-array
+
+ realtek,do-toggle:
+ description: Do PHY parameter toggle when port status change
+ type: boolean
+
+ realtek,check-efuse:
+ description: Enable to fix PHY parameter from reading otp table
+ type: boolean
+
+ realtek,use-default-parameter:
+ description: Don't set parameter and use default value
+ type: boolean
+
+ realtek,is-double-sensitivity-mode:
+ description: Enable double sensitivity mode
+ type: boolean
+
+ realtek,ldo-page0-e4-compensate:
+ description: Adjust the PHY parameter for page 0 0xE4 for ldo mode
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ realtek,page0-e4-compensate:
+ description: Adjust the PHY parameter for page 0 0xE4
+ for efuse table v2
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ phy0_data:
+ description: The child node of PHY for parameter v2.
+ type: object
+ properties:
+ realtek,page0-size:
+ description: PHY data page 0 size
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ realtek,page0-data-A00:
+ description: PHY data page 0 address and value
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+
+ realtek,page1-size:
+ description: PHY data page 1 size
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ realtek,page1-data-A00:
+ description: PHY data page 1 address and value
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+
+ realtek,page2-size:
+ description: PHY data page 2 size
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ realtek,page2-data-A00:
+ description: PHY data page 2 address and value
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+
+ realtek,do-toggle:
+ description: Do PHY parameter toggle when port status change
+ type: boolean
+
+ realtek,do-toggle-driving:
+ description: Do PHY parameter toggle for driving when port
+ status change
+ type: boolean
+
+ realtek,check-efuse:
+ description: Enable to fix PHY parameter from reading otp table
+ type: boolean
+
+ realtek,use-default-parameter:
+ description: Don't set parameter and use default value
+ type: boolean
+
+ realtek,is-double-sensitivity-mode:
+ description: Enable double sensitivity mode
+ type: boolean
+
+ realtek,ldo-force-enable:
+ description: Force enable ldo mode
+ type: boolean
+
+ realtek,ldo-page0-e4-compensate:
+ description: Adjust the PHY parameter for page0 0xE4 for ldo mode
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ realtek,page0-e4-compensate:
+ description: Adjust the PHY parameter for page0 0xE4
+ for efuse table v2
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ dwc3_u3drd_usb2phy: dwc3_u3drd_usb2phy@98013e14 {
+ compatible = "realtek,usb2phy";
+ reg = <0x98013e14 0x4>, <0x98058280 0x4>;
+ status = "okay";
+ realtek,phyN = <1>;
+
+ phy0 {
+ realtek,phy-data-page0-size = <16>;
+ realtek,phy-data-page0-addr = /bits/ 8
+ <0xE0 0xE1 0xE2 0xE3 0xE4 0xE5 0xE6 0xE7 0xF0 0xF1
+ 0xF2 0xF3 0xF4 0xF5 0xF6 0xF7>;
+ realtek,phy-data-page0-A00 = /bits/ 8
+ <0xE0 0x30 0x79 0x8D 0x6A 0x65 0x01 0x71 0xFC 0x8C
+ 0x00 0x11 0x9B 0x00 0x00 0x0A>;
+ realtek,phy-data-page0-B00 = /bits/ 8
+ <0x18 0x30 0x79 0x8D 0x6A 0x65 0x01 0x71 0xFC 0x8C
+ 0x00 0x11 0x9B 0x00 0x00 0x32>;
+ realtek,phy-data-page1-size = <8>;
+ realtek,phy-data-page1-addr = /bits/ 8
+ <0xE0 0xE1 0xE2 0xE3 0xE4 0xE5 0xE6 0xE7>;
+ realtek,phy-data-page1-A00 = /bits/ 8
+ <0x25 0xEF 0x60 0x44 0x00 0x0F 0x18 0xE3>;
+ realtek,phy-data-page2-size = <1>;
+ realtek,phy-data-page2-addr = /bits/ 8
+ <0xE0>;
+ realtek,phy-data-page2-A00 = /bits/ 8
+ <0x01>;
+ realtek,do-toggle;
+ realtek,check-efuse;
+ realtek,is-double-sensitivity-mode;
+ realtek,ldo-page0-e4-compensate = <(-2)>;
+ };
+ };
+
+ - |
+ usb_port0_usb2phy: usb_port0_usb2phy@13214 {
+ compatible = "realtek,usb2phy";
+ reg = <0x13214 0x4>, <0x28280 0x4>;
+ realtek,usb = <&usb_port0>;
+ realtek,mac = <&port0_dwc3>;
+ realtek,usb_ctrl = <&usb_ctrl>;
+
+ realtek,port-index = <0>;
+ realtek,phyN = <1>;
+ phy0_data {
+ realtek,page0-size = <16>;
+ realtek,page0-data-A00 = /* < addr data > */
+ <0xE0 0xA3>, <0xE4 0xB2>, <0xE5 0x4F>, <0xE6 0x42>;
+ realtek,page1-size = <8>;
+ realtek,page1-data-A00 = <0xE3 0x64>;
+ realtek,page2-size = <8>;
+ realtek,page2-data-A00 = <0xE7 0x45>;
+ realtek,do-toggle;
+ realtek.do-toggle-driving;
+ realtek,disconnect-driving-updated = <0x8>;
+ realtek,check-efuse;
+ realtek,is-double-sensitivity-mode;
+ realtek,ldo-force-enable;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/phy/realtek,usb3phy.yaml b/Documentation/devicetree/bindings/phy/realtek,usb3phy.yaml
new file mode 100644
index 000000000000..b4e9e0f061b7
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/realtek,usb3phy.yaml
@@ -0,0 +1,195 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2023 Realtek Semiconductor Corporation
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/realtek,usb3phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Realtek DHC SoCs USB3 PHY
+
+maintainers:
+ - Stanley Chang <stanley_chang@xxxxxxxxxxx>
+
+description: |
+ Realtek USB 3.0 PHY support the digital home center (DHC) RTD series SoCs.
+
+properties:
+ compatible:
+ enum:
+ - realtek,usb3phy
+ - realtek,rtd-usb3phy
+ - realtek,rtd1295-usb3phy
+ - realtek,rtd1619-usb3phy
+ - realtek,rtd1319-usb3phy
+ - realtek,rtd1619b-usb3phy
+ - realtek,rtd1319d-usb3phy
+
+ reg:
+ maxItems: 1
+
+ realtek,usb:
+ description: The phandler of realtek dwc3 node
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+ realtek,mac:
+ description: The phandler of dwc3 node
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+ realtek,usb_ctrl:
+ description: The phandler of usb power control node
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+ realtek,port-index:
+ description: The index of USB 3.0 PHY
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ realtek,phyN:
+ description: The total amount of USB 3.0 PHY
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ phy0:
+ description: The child node of PHY for parameter v1.
+ type: object
+ properties:
+ realtek,phy-data-size:
+ description: PHY data size
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ realtek,phy-data-addr:
+ description: PHY data address
+ $ref: /schemas/types.yaml#/definitions/uint8-array
+
+ realtek,phy-data-A00:
+ description: PHY data value
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+
+ realtek,do-toggle:
+ description: Do PHY parameter toggle when port status change
+ type: boolean
+
+ realtek,do-toggle-once:
+ description: Do PHY parameter toggle only on PHY init
+ type: boolean
+
+ realtek,check-efuse:
+ description: Enable to fix PHY parameter from reading otp table
+ type: boolean
+
+ realtek,use-default-parameter:
+ description: Don't set parameter and use default value
+ type: boolean
+
+ realtek,check-rx-front-end-offset:
+ description: Enable to check rx front end offset
+ type: boolean
+
+ phy0_data:
+ description: The child node of PHY for parameter v2.
+ type: object
+ properties:
+ realtek,phy-data-size:
+ description: PHY data size
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ realtek,phy-data-A00:
+ description: PHY data address and value
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+
+ realtek,do-toggle:
+ description: Do PHY parameter toggle when port status change
+ type: boolean
+
+ realtek,do-toggle-once:
+ description: Do PHY parameter toggle only on phy init
+ type: boolean
+
+ realtek,check-efuse:
+ description: Enable to fix PHY parameter from reading otp table
+ type: boolean
+
+ realtek,use-default-parameter:
+ description: Don't set parameter and use default value
+ type: boolean
+
+ realtek,check-rx-front-end-offset:
+ description: Enable to check rx front end offset
+ type: boolean
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ dwc3_u3drd_usb3phy: dwc3_u3drd_usb3phy@98013e10 {
+ compatible = "realtek,usb3phy";
+ reg = <0x98013e10 0x4>;
+ status = "okay";
+ realtek,port-index = <0>; /* index in u3 port */
+ realtek,phyN = <1>;
+
+ phy0 {
+ realtek,phy-data-size = <0x30>;
+ realtek,phy-data-addr = /bits/ 8
+ <0x00 0x01 0x02 0x03 0x04 0x05 0x06
+ 0x07 0x08 0x09 0x0A 0x0B 0x0C 0x0D
+ 0x0E 0x0F 0x10 0x11 0x12 0x13 0x14
+ 0x15 0x16 0x17 0x18 0x19 0x1A 0x1B
+ 0x1C 0x1D 0x1E 0x1F 0x20 0x21 0x22
+ 0x23 0x24 0x25 0x26 0x27 0x28 0x29
+ 0x2A 0x2B 0x2C 0x2D 0x2E 0x2F>;
+ realtek,phy-data-A00 = /bits/ 16
+ <0x400C 0xAC86 0x6042 0x2771 0x72F5 0x2AD3 0x0003
+ 0x2E00 0x3591 0x925C 0xA608 0xA905 0xC000 0xEF1E
+ 0x2010 0x8D50 0x000C 0x4C10 0xFC00 0x0C81 0xDE01
+ 0x0000 0x0000 0x0000 0x0000 0x6000 0x0085 0x2014
+ 0xC900 0xA03F 0xC2E0 0x7E00 0x705A 0xF645 0x0013
+ 0xCB66 0x4770 0x126C 0x840A 0x01D6 0xF802 0xff04
+ 0x3040 0x8028 0xFFFF 0xFFFF 0x0000 0x8600>;
+ realtek,phy-data-B00 = /bits/ 16
+ <0x400C 0xAC86 0x6042 0x2771 0x72F5 0x2AD3 0x0003
+ 0x2E00 0x3591 0x924C 0xA608 0xB905 0xC000 0xEF1E
+ 0x2010 0x8D50 0x000C 0x4C10 0xFC00 0x0C81 0xDE01
+ 0x0000 0x0000 0x0000 0x0000 0x6000 0x0085 0x2014
+ 0xC900 0xA03F 0xC2E0 0x7E00 0x705A 0xF645 0x0013
+ 0xCB66 0x4770 0x126C 0x840A 0x01D6 0xF802 0xff04
+ 0x3040 0x8028 0xFFFF 0xFFFF 0x0000 0x8600>;
+ realtek,do-toggle;
+ };
+ };
+
+ - |
+ usb_port2_usb3phy: usb_port2_usb3phy@13e10 {
+ compatible = "realtek,usb3phy";
+ reg = <0x13e10 0x4>;
+ realtek,usb = <&usb_port2>;
+ realtek,mac = <&port2_dwc3>;
+ realtek,usb_ctrl = <&usb_ctrl>;
+
+ realtek,port-index = <0>; /* index in u3 port */
+ realtek,phyN = <1>;
+ phy0_data {
+ realtek,phy-data-size = <0x30>;
+ realtek,phy-data-A00 = /* <addr data> */
+ <0x01 0xAC8C>,
+ <0x06 0x0017>,
+ <0x09 0x724C>,
+ <0x0B 0xB90D>,
+ <0x0A 0xB610>,
+ <0x0D 0xEF2A>,
+ <0x0F 0x9050>,
+ <0x10 0x000C>,
+ <0x20 0x70FF>,
+ <0x21 0xCFAA>,
+ <0x22 0x0013>,
+ <0x23 0xDB66>,
+ <0x26 0x8609>,
+ <0x29 0xFF13>,
+ <0x2A 0x3070>;
+ realtek,do-toggle-once;
+ realtek,check_efuse;
+ };
+ };
+
--
2.34.1

Next message: Stanley Chang: "[PATCH v1 1/3] usb: phy: add usb phy notify port status API"
Previous message: Finn Thain: "Re: [PATCH 02/11] Docs/scsi: introduction: multiple cleanups"
In reply to: Stanley Chang: "[PATCH v1 1/3] usb: phy: add usb phy notify port status API"
Next in thread: Stanley Chang: "[PATCH v1 2/3] usb: phy: Add driver for the Realtek SoC USB 2.0/3.0 PHY"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]