Re: [PATCH 09/11] arm64: dtsi: qcom: ipq5018: enable nodes required for multipd

[Manikanta Mylavarapu]

On 3/7/2023 9:11 PM, Krzysztof Kozlowski wrote:
> On 07/03/2023 05:41, Manikanta Mylavarapu wrote:
> > Enable nodes required for multipd remoteproc bring up
> >
> > Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
> > ---
> >   arch/arm64/boot/dts/qcom/ipq5018.dtsi | 130 ++++++++++++++++++++++++++
> >   1 file changed, 130 insertions(+)
> >   	soc: soc@0 {
> >   		#address-cells = <1>;
> >   		#size-cells = <1>;
> > @@ -217,5 +259,93 @@ frame@b128000 {
> >   				status = "disabled";
> >   			};
> >   		};
> > +
> > +		tcsr_mutex: hwlock@1905000 {
>
> This does not look like in correct order. Don't stuff things to the end
> of lists.
Sure. I will keep nodes as per order.

> > +			compatible = "qcom,tcsr-mutex";
> > +			reg = <0x01905000 0x8000>;
> > +			#hwlock-cells = <1>;
> > +		};
> > +
> > +		apcs_glb: mailbox@b111000 {
> > +			compatible = "qcom,ipq5018-apcs-apps-global";
> > +			reg = <0x0b111000 0x1000>;
> > +			#clock-cells = <1>;
> > +			#mbox-cells = <1>;
> > +		};
> > +
> > +		q6v5_wcss: remoteproc@cd00000 {
> > +			compatible = "qcom,ipq5018-q6-mpd";
> > +			#address-cells = <1>;
> > +			#size-cells = <1>;
> > +			ranges;
> > +			reg = <0x0cd00000 0x4040>;
> > +			interrupts-extended = <&intc GIC_SPI 291 IRQ_TYPE_EDGE_RISING>,
> > +					      <&wcss_smp2p_in 0 0>,
> > +					      <&wcss_smp2p_in 1 0>,
> > +					      <&wcss_smp2p_in 2 0>,
> > +					      <&wcss_smp2p_in 3 0>;
> > +			interrupt-names = "wdog",
> > +					  "fatal",
> > +					  "ready",
> > +					  "handover",
> > +					  "stop-ack";
> > +
> > +			qcom,smem-states = <&wcss_smp2p_out 0>,
> > +					   <&wcss_smp2p_out 1>;
> > +			qcom,smem-state-names = "shutdown",
> > +						"stop";
> > +			memory-region = <&q6_region>;
> > +
> > +			glink-edge {
> > +				interrupts = <GIC_SPI 179 IRQ_TYPE_EDGE_RISING>;
> > +				label = "rtr";
> > +				qcom,remote-pid = <1>;
> > +				mboxes = <&apcs_glb 8>;
> > +			};
> > +
> > +			q6_wcss_pd1: remoteproc_pd1 {
>
> No underscores in node names, generic node names. Actually I don't get
> why do you need empty node at all.
I removed underscores, now name should be pd-1/pd-2/pd-3. Yeah, it 
should not be empty node. I will correct it.

Thanks & Regards,
Manikanta.
> > +				compatible = "qcom,ipq5018-wcss-ahb-mpd";
> > +			};
> > +
> > +			q6_wcss_pd2: remoteproc_pd2 {
> > +				compatible = "qcom,ipq5018-wcss-pcie-mpd";
> > +				interrupts-extended = <&wcss_smp2p_in 16 0>,
> > +					<&wcss_smp2p_in 17 0>,
> > +					<&wcss_smp2p_in 20 0>,
> > +					<&wcss_smp2p_in 19 0>;
>
>
> Best regards,
> Krzysztof