Re: [PATCH v4 0/2] Fix Goodix touchscreen power leakage for MT8186 boards

[Doug Anderson]

Hi,

On Wed, Apr 26, 2023 at 8:57 PM Fei Shao <fshao@xxxxxxxxxxxx> wrote:
>
> These changes are based on the series in [1], which modified the
> i2c-hid-of-goodix driver and removed the workaround for a power leakage
> issue, so the issue revisits on Mediatek MT8186 boards (Steelix).
>
> The root cause is that the touchscreen can be powered in different ways
> depending on the hardware designs, and it's not as easy to come up with
> a solution that is both simple and elegant for all the known designs.
>
> To address the issue, I ended up adding a new boolean property for the
> driver so that we can control the power up/down sequence depending on
> that.
>
> Adding a new property might not be the cleanest approach for this, but
> at least the intention would be easy enough to understand, and it
> introduces relatively small change to the code and fully preserves the
> original control flow.
> I hope this is something acceptable, and I'm open to any better
> approaches.
>
> [1] https://lore.kernel.org/all/20230207024816.525938-1-dianders@xxxxxxxxxxxx/
>
> Changes in v4:
> - Minor coding style improvement
>
> Changes in v3:
> - In power-down, only skip the GPIO but not the regulator calls if the
>   flag is set
>
> Changes in v2:
> - Use a more accurate property name and with "goodix," prefix.
> - Do not change the regulator_enable logic during power-up.
>
> Fei Shao (2):
>   dt-bindings: input: goodix: Add "goodix,no-reset-during-suspend"
>     property
>   HID: i2c-hid: goodix: Add support for "goodix,no-reset-during-suspend"
>     property
>
>  .../bindings/input/goodix,gt7375p.yaml           |  9 +++++++++
>  drivers/hid/i2c-hid/i2c-hid-of-goodix.c          | 16 +++++++++++++++-
>  2 files changed, 24 insertions(+), 1 deletion(-)

Just double-checking if there is any work needed on this series. I
think it's ready to land but I wanted to double-check.

Thanks!

-Doug