[PATCH 0/2] drm/panel: add fannal c3004 panel

[Paulo Pavacic]

Fannal C3004 is a 2 lane MIPI DSI 480x800 panel which requires initialization with DSI DCS commands. After some commands delay is required.

In previous discussions for device tree [1] [2] and device driver [3] were named mipi-dsi-bringup.

[1] https://patchwork.ozlabs.org/project/devicetree-bindings/patch/CAO9szn3t-giVipb5oH_3mzQZbnXbDqqz0WEg8uAmo-1W2uKzFg@xxxxxxxxxxxxxx/
[2] https://patchwork.ozlabs.org/project/devicetree-bindings/patch/CAO9szn18KsR0c+U8EEY1=xnmsKMxy6SEArMUic0z=aYJDVwWCQ@xxxxxxxxxxxxxx/
[3] https://lists.freedesktop.org/archives/dri-devel/2023-May/404775.html    

Paulo Pavacic (2):
  dt-bindings: display: panel: add fannal,c3004
  drm/panel-fannal-c3004: Add fannal c3004 DSI panel

 .../bindings/display/panel/fannal,c3004.yaml  |  75 ++++
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 MAINTAINERS                                   |   7 +
 drivers/gpu/drm/panel/Kconfig                 |  11 +
 drivers/gpu/drm/panel/Makefile                |   1 +
 drivers/gpu/drm/panel/panel-fannal-c3004.c    | 405 ++++++++++++++++++
 6 files changed, 501 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/fannal,c3004.yaml
 create mode 100644 drivers/gpu/drm/panel/panel-fannal-c3004.c

-- 
2.40.1