Re: [PATCH net-next v2 7/7] net: dsa: mv88e6xxx: enable support for 88E6361 switch

[Andrew Lunn]

> @@ -421,9 +421,14 @@ phy_interface_t mv88e6390x_port_max_speed_mode(struct mv88e6xxx_chip *chip,
>  int mv88e6393x_port_set_speed_duplex(struct mv88e6xxx_chip *chip, int port,
>  				     int speed, int duplex)
>  {
> +	bool is_6361 =
> +		chip->info->prod_num == MV88E6XXX_PORT_SWITCH_ID_PROD_6361;
>  	u16 reg, ctrl;
>  	int err;
>  
> +	if (is_6361 && speed > 2500)
> +		return -EOPNOTSUPP;

I would move the comparison inside the if, so removing the ugly looking split is_6361 line.

> +
>  	if (speed == 200 && port != 0)
>  		return -EOPNOTSUPP;
>  
> @@ -506,8 +511,12 @@ int mv88e6393x_port_set_speed_duplex(struct mv88e6xxx_chip *chip, int port,
>  phy_interface_t mv88e6393x_port_max_speed_mode(struct mv88e6xxx_chip *chip,
>  					       int port)
>  {
> +	bool is_6361 =
> +		chip->info->prod_num == MV88E6XXX_PORT_SWITCH_ID_PROD_6361;
> +
>  	if (port == 0 || port == 9 || port == 10)
> -		return PHY_INTERFACE_MODE_10GBASER;
> +		return is_6361 ? PHY_INTERFACE_MODE_2500BASEX :
> +			PHY_INTERFACE_MODE_10GBASER;

Please see if you can rearrange this code as well.

Thanks
	Andrew