[PATCH V2 12/13] arm64: dts: qcom: ipq5018: Add RDP432-c1 board support

[Manikanta Mylavarapu]

Add initial device tree support for the RDP432-C1 board.

Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
---
Changes in V2:
	- Renamed mp03.5-c1 to RDP432-c1
	- Removed boot-args
	- Resolved dt-binding error's

 arch/arm64/boot/dts/qcom/Makefile             |  1 +
 .../arm64/boot/dts/qcom/ipq5018-rdp432-c1.dts | 49 +++++++++++++++++++
 2 files changed, 50 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/ipq5018-rdp432-c1.dts

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 259bd57c6064..bb9164de75b0 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -3,6 +3,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= apq8016-sbc.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= apq8094-sony-xperia-kitakami-karin_windy.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= apq8096-db820c.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= apq8096-ifc6640.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= ipq5018-rdp432-c1.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= ipq5018-rdp432-c2.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= ipq5332-mi01.2.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= ipq5332-rdp468.dtb
diff --git a/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c1.dts b/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c1.dts
new file mode 100644
index 000000000000..7fe28d9859b0
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c1.dts
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * IPQ5018 RDP432-C1 board device tree source
+ *
+ * Copyright (c) 2023, The Linux Foundation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "ipq5018.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ5018/AP-RDP432.1-C1";
+	compatible = "qcom,ipq5018-rdp432-c1", "qcom,ipq5018";
+
+	aliases {
+		serial0 = &blsp1_uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&blsp1_uart1 {
+	pinctrl-0 = <&uart1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&q6v5_wcss {
+	pd-2 {
+		firmware-name = "IPQ5018/q6_fw.mdt";
+		status = "okay";
+	};
+
+	pd-3 {
+		firmware-name = "IPQ5018/q6_fw.mdt";
+		status = "okay";
+	};
+};
+
+&sleep_clk {
+	clock-frequency = <32000>;
+};
+
+&xo_board_clk {
+	clock-frequency = <24000000>;
+};
--
2.17.1