Re: [PATCH 5/5] arm64: dts: qcom: sc8280xp: add resets for soundwire controllers

[Johan Hovold]

On Thu, May 18, 2023 at 12:38:00PM +0100, Srinivas Kandagatla wrote:
> Soundwire controllers on sc8280xp needs an explicit reset, this
> patch adds support for this.

s/this patch adds/add/

> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 19 +++++++++++++++++++
>  1 file changed, 19 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> index d2a2224d138a..a2d0f8abe23d 100644
> --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> @@ -6,6 +6,7 @@
>  
>  #include <dt-bindings/clock/qcom,dispcc-sc8280xp.h>
>  #include <dt-bindings/clock/qcom,gcc-sc8280xp.h>
> +#include <dt-bindings/clock/qcom,lpasscc-sc8280xp.h>
>  #include <dt-bindings/clock/qcom,rpmh.h>
>  #include <dt-bindings/interconnect/qcom,osm-l3.h>
>  #include <dt-bindings/interconnect/qcom,sc8280xp.h>
> @@ -2548,6 +2549,8 @@ rxmacro: rxmacro@3200000 {
>  		swr1: soundwire-controller@3210000 {
>  			compatible = "qcom,soundwire-v1.6.0";
>  			reg = <0 0x03210000 0 0x2000>;
> +			resets = <&lpass_audiocc LPASS_AUDIO_SWR_RX_CGCR>;
> +			reset-names = "swr_audio_cgcr";

Move after clocks.

>  			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
>  			clocks = <&rxmacro>;
>  			clock-names = "iface";
> @@ -2647,6 +2650,13 @@ swr0: soundwire-controller@3250000 {
>  			status = "disabled";
>  		};
>  
> +		lpass_audiocc: clock-controller@3300000 {
> +			compatible = "qcom,sc8280xp-lpassaudiocc";
> +			reg = <0 0x032a9000 0 0x1000>;

Either this property or the unit address is wrong as they do not match.

The bindings currently mandates that vendor property you added
("qcom,adsp-pil-mode), but you left it out here.

> +			#reset-cells = <1>;
> +			#clock-cells = <1>;

clock before reset for some sort order.

> +		};
> +

Your preliminary version of this patch also added a reset to swr0, which
has been left out here. Was that not needed?

>  		swr2: soundwire-controller@3330000 {
>  			compatible = "qcom,soundwire-v1.6.0";
>  			reg = <0 0x03330000 0 0x2000>;
> @@ -2654,6 +2664,8 @@ swr2: soundwire-controller@3330000 {
>  				     <GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>;
>  			interrupt-names = "core", "wakeup";
>  
> +			resets = <&lpasscc LPASS_AUDIO_SWR_TX_CGCR>;
> +			reset-names = "swr_audio_cgcr";

Add after clocks.

>  			clocks = <&txmacro>;
>  			clock-names = "iface";
>  			label = "TX";
> @@ -2849,6 +2861,13 @@ data-pins {
>  			};
>  		};
>  
> +		lpasscc: clock-controller@33e0000 {
> +			compatible = "qcom,sc8280xp-lpasscc";
> +			reg = <0 0x033e0000 0 0x21000>;

Your driver (and the binding example) seems to suggest that the size
here should be 0x12000.

The vendor property appears to be missing here too (or the binding is
incorrect).

> +			#reset-cells = <1>;
> +			#clock-cells = <1>;

clock before reset

> +		};
> +
>  		usb_0_qmpphy: phy@88eb000 {
>  			compatible = "qcom,sc8280xp-qmp-usb43dp-phy";
>  			reg = <0 0x088eb000 0 0x4000>;

Johan