Re: [PATCH] ARM: dts: at91: tse850: add properties for gpio-line-names

[Claudiu.Beznea]

On 28.04.2023 11:06, Peter Rosin wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
> 
> Signal names are one-to-one copies from the schematics, except VBUS
> which is an unnamed signal there.
> 
> Signed-off-by: Peter Rosin <peda@xxxxxxxxxx>

Applied to at91-dt, thanks!

Please note that I've added 1 tab in front of index based comment. It looks
more readable this way and this is how other DTSes I've inspect are doing.
Please have a look [1] and let me know if there are any issues.

[1]
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux.git/commit/?h=at91-dt&id=08e4dd1d12acc02244b119790c8e50bbf3618a89

> ---
>  arch/arm/boot/dts/at91-tse850-3.dts | 60 +++++++++++++++++++++++++++++
>  1 file changed, 60 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/at91-tse850-3.dts b/arch/arm/boot/dts/at91-tse850-3.dts
> index b99a4fb44a36..13d92797ada6 100644
> --- a/arch/arm/boot/dts/at91-tse850-3.dts
> +++ b/arch/arm/boot/dts/at91-tse850-3.dts
> @@ -300,3 +300,63 @@
> 
>         dmas = <0>, <0>;        /*  Do not use DMA for dbgu */
>  };
> +
> +&pioA {
> +       gpio-line-names =
> +/*  0 */       "SUP-A", "SUP-B", "SUP-C", "SIG<LEV",
> +/*  4 */       "", "/RFRST", "", "",
> +/*  8 */       "/ADD", "", "/LOOP1", "/LOOP2",
> +/* 12 */       "", "", "", "",
> +/* 16 */       "LED1GREEN", "LED1RED", "LED2GREEN", "LED2RED",
> +/* 20 */       "LED3GREEN", "LED3RED", "LED4GREEN", "LED4RED",
> +/* 24 */       "", "", "", "",
> +/* 28 */       "", "", "SDA", "SCL";
> +};
> +
> +&pioB {
> +       gpio-line-names =
> +/*  0 */       "", "", "", "",
> +/*  4 */       "", "", "", "",
> +/*  8 */       "", "", "", "",
> +/* 12 */       "", "", "", "",
> +/* 16 */       "", "", "", "",
> +/* 20 */       "", "", "", "",
> +/* 24 */       "", "", "SIG<LIN", "SIG>LIN",
> +/* 28 */       "RXD", "TXD", "BRX", "BTX";
> +};
> +
> +&pioC {
> +       gpio-line-names =
> +/*  0 */       "ETX0", "ETX1", "ERX0", "ERX1",
> +/*  4 */       "ETXEN", "ECRSDV", "ERXER", "EREFCK",
> +/*  8 */       "EMDC", "EMDIO", "", "",
> +/* 12 */       "", "", "", "/ILIM",
> +/* 16 */       "BCK", "LRCK", "DIN", "",
> +/* 20 */       "", "", "", "",
> +/* 24 */       "", "", "", "",
> +/* 28 */       "", "", "", "VBUS";
> +};
> +
> +&pioD {
> +       gpio-line-names =
> +/*  0 */       "I1", "I2", "O1", "EXTVEN",
> +/*  4 */       "", "456KHZ", "VCTRL", "SYNCSEL",
> +/*  8 */       "STEREO", "", "", "",
> +/* 12 */       "", "", "", "",
> +/* 16 */       "", ">LIN", "LIN>", "",
> +/* 20 */       "VREFEN", "", "", "",
> +/* 24 */       "", "", "VINOK", "",
> +/* 28 */       "POEOK", "USBON", "POELOAD", "";
> +};
> +
> +&pioE {
> +       gpio-line-names =
> +/*  0 */       "", "", "", "",
> +/*  4 */       "", "", "", "",
> +/*  8 */       "", "", "", "",
> +/* 12 */       "", "", "", "",
> +/* 16 */       "", "", "", "",
> +/* 20 */       "", "ALE", "CLE", "",
> +/* 24 */       "", "", "", "",
> +/* 28 */       "", "", "", "/ETHINT";
> +};
> --
> 2.20.1
>