Re: [PATCH v2 3/4] arm64: dts: qcom: qdu1000: Add SDHCI1 pin configuration to DTSI

From: Bhupesh Sharma
Date: Mon May 22 2023 - 05:50:16 EST


On Mon, 22 May 2023 at 15:06, Komal Bajaj <quic_kbajaj@xxxxxxxxxxx> wrote:
>
> Add required pins for SDHCI1, so that the interface can work reliably.
>
> Reviewed-by: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>wq

Err.. an extra wq .. I think this can be fixed while applying, so
should not require a new version.

Thanks,
Bhupesh

> Signed-off-by: Komal Bajaj <quic_kbajaj@xxxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/qdu1000.dtsi | 50 +++++++++++++++++++++++++++
> 1 file changed, 50 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/qdu1000.dtsi b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
> index 38ee7115a35f..6f23cbfc024c 100644
> --- a/arch/arm64/boot/dts/qcom/qdu1000.dtsi
> +++ b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
> @@ -1151,6 +1151,56 @@
> pins = "gpio31";
> function = "gpio";
> };
> +
> + sdc1_on_state: sdc1-on-state {
> + clk-pins {
> + pins = "sdc1_clk";
> + drive-strength = <16>;
> + bias-disable;
> + };
> +
> + cmd-pins {
> + pins = "sdc1_cmd";
> + drive-strength = <10>;
> + bias-pull-up;
> + };
> +
> + data-pins {
> + pins = "sdc1_data";
> + drive-strength = <10>;
> + bias-pull-up;
> + };
> +
> + rclk-pins {
> + pins = "sdc1_rclk";
> + bias-pull-down;
> + };
> + };
> +
> + sdc1_off_state: sdc1-off-state {
> + clk-pins {
> + pins = "sdc1_clk";
> + drive-strength = <2>;
> + bias-disable;
> + };
> +
> + cmd-pins {
> + pins = "sdc1_cmd";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> +
> + data-pins {
> + pins = "sdc1_data";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> +
> + rclk-pins {
> + pins = "sdc1_rclk";
> + bias-pull-down;
> + };
> + };
> };
>
> apps_smmu: iommu@15000000 {
> --
> 2.17.1
>