Re: [PATCH v2] PCI: acpiphp: Reassign resources on bridge if necessary

[Rafael J. Wysocki]

On Mon, May 22, 2023 at 1:06 PM Igor Mammedov <imammedo@xxxxxxxxxx> wrote:
>
> On Mon, 24 Apr 2023 21:15:57 +0200
> Igor Mammedov <imammedo@xxxxxxxxxx> wrote:
>
> > When using ACPI PCI hotplug, hotplugging a device with
> > large BARs may fail if bridge windows programmed by
> > firmware are not large enough.
>
> Rafael,
>
> Since there was no more comments for a while,
> can you merge this patch through your tree?

I need an ACK from Bjorn on this, as the PCI maintainer, or it can go
in via the PCI tree as far as I'm concerned.

Thanks!

> > Reproducer:
> >   $ qemu-kvm -monitor stdio -M q35  -m 4G \
> >       -global ICH9-LPC.acpi-pci-hotplug-with-bridge-support=on \
> >       -device id=rp1,pcie-root-port,bus=pcie.0,chassis=4 \
> >       disk_image
> >
> >  wait till linux guest boots, then hotplug device
> >    (qemu) device_add qxl,bus=rp1
> >
> >  hotplug on guest side fails with:
> >    pci 0000:01:00.0: [1b36:0100] type 00 class 0x038000
> >    pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x03ffffff]
> >    pci 0000:01:00.0: reg 0x14: [mem 0x00000000-0x03ffffff]
> >    pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00001fff]
> >    pci 0000:01:00.0: reg 0x1c: [io  0x0000-0x001f]
> >    pci 0000:01:00.0: BAR 0: no space for [mem size 0x04000000]
> >    pci 0000:01:00.0: BAR 0: failed to assign [mem size 0x04000000]
> >    pci 0000:01:00.0: BAR 1: no space for [mem size 0x04000000]
> >    pci 0000:01:00.0: BAR 1: failed to assign [mem size 0x04000000]
> >    pci 0000:01:00.0: BAR 2: assigned [mem 0xfe800000-0xfe801fff]
> >    pci 0000:01:00.0: BAR 3: assigned [io  0x1000-0x101f]
> >    qxl 0000:01:00.0: enabling device (0000 -> 0003)
> >    Unable to create vram_mapping
> >    qxl: probe of 0000:01:00.0 failed with error -12
> >
> > However when using native PCIe hotplug
> >   '-global ICH9-LPC.acpi-pci-hotplug-with-bridge-support=off'
> > it works fine, since kernel attempts to reassign unused resources.
> > Use the same machinery as native PCIe hotplug to (re)assign resources.
> >
> > Signed-off-by: Igor Mammedov <imammedo@xxxxxxxxxx>
> > ---
> > tested in QEMU with Q35 machine on PCIE root port and also
> > with nested conventional bridge attached to root port.
> >
> > v2:
> >   * fixup subject to match expected style
> >   * drop no longer needed __pci_bus_size_bridges() to avoid
> >     memory leak (Bjorn Helgaas <helgaas@xxxxxxxxxx>)
> > ---
> >  drivers/pci/hotplug/acpiphp_glue.c | 5 +----
> >  1 file changed, 1 insertion(+), 4 deletions(-)
> >
> > diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
> > index 5b1f271c6034..328d1e416014 100644
> > --- a/drivers/pci/hotplug/acpiphp_glue.c
> > +++ b/drivers/pci/hotplug/acpiphp_glue.c
> > @@ -498,7 +498,6 @@ static void enable_slot(struct acpiphp_slot *slot, bool bridge)
> >                               acpiphp_native_scan_bridge(dev);
> >               }
> >       } else {
> > -             LIST_HEAD(add_list);
> >               int max, pass;
> >
> >               acpiphp_rescan_slot(slot);
> > @@ -512,12 +511,10 @@ static void enable_slot(struct acpiphp_slot *slot, bool bridge)
> >                               if (pass && dev->subordinate) {
> >                                       check_hotplug_bridge(slot, dev);
> >                                       pcibios_resource_survey_bus(dev->subordinate);
> > -                                     __pci_bus_size_bridges(dev->subordinate,
> > -                                                            &add_list);
> >                               }
> >                       }
> >               }
> > -             __pci_bus_assign_resources(bus, &add_list, NULL);
> > +             pci_assign_unassigned_bridge_resources(bus->self);
> >       }
> >
> >       acpiphp_sanitize_bus(bus);
>