Re: [-next v1] riscv: dts: starfive: visionfive 2: Enable usb0 and fix tdm pins sort order

[Conor Dooley]

On Mon, Aug 28, 2023 at 01:54:53PM +0200, Krzysztof Kozlowski wrote:
> On 28/08/2023 13:52, Hal Feng wrote:
> > usb0 was disabled by mistake when merging, so enable it.
> > tdm_pins node should be sorted alphabetically.
> > 
> > Fixes: e7c304c0346d ("riscv: dts: starfive: jh7110: add the node and pins configuration for tdm")
> > Signed-off-by: Hal Feng <hal.feng@xxxxxxxxxxxxxxxx>
> > ---
> >  .../jh7110-starfive-visionfive-2.dtsi         | 49 ++++++++++---------
> >  1 file changed, 25 insertions(+), 24 deletions(-)
> > 
> > diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
> > index d79f94432b27..382dfb5e64e4 100644
> > --- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
> > +++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
> > @@ -440,30 +440,6 @@ GPOEN_ENABLE,
> >  		};
> >  	};
> >  
> > -	uart0_pins: uart0-0 {
> > -		tx-pins {
> > -			pinmux = <GPIOMUX(5, GPOUT_SYS_UART0_TX,
> > -					     GPOEN_ENABLE,
> > -					     GPI_NONE)>;
> > -			bias-disable;
> > -			drive-strength = <12>;
> > -			input-disable;
> > -			input-schmitt-disable;
> > -			slew-rate = <0>;
> > -		};
> > -
> > -		rx-pins {
> > -			pinmux = <GPIOMUX(6, GPOUT_LOW,
> > -					     GPOEN_DISABLE,
> > -					     GPI_SYS_UART0_RX)>;
> > -			bias-disable; /* external pull-up */
> > -			drive-strength = <2>;
> > -			input-enable;
> > -			input-schmitt-enable;
> > -			slew-rate = <0>;
> > -		};
> > -	};
> > -
> >  	tdm_pins: tdm-0 {
> >  		tx-pins {
> >  			pinmux = <GPIOMUX(44, GPOUT_SYS_TDM_TXD,
> > @@ -497,6 +473,30 @@ GPOEN_DISABLE,
> >  			input-enable;
> >  		};
> >  	};
> > +
> > +	uart0_pins: uart0-0 {
> > +		tx-pins {
> > +			pinmux = <GPIOMUX(5, GPOUT_SYS_UART0_TX,
> > +					     GPOEN_ENABLE,
> > +					     GPI_NONE)>;
> > +			bias-disable;
> > +			drive-strength = <12>;
> > +			input-disable;
> > +			input-schmitt-disable;
> > +			slew-rate = <0>;
> > +		};
> > +
> > +		rx-pins {
> > +			pinmux = <GPIOMUX(6, GPOUT_LOW,
> > +					     GPOEN_DISABLE,
> > +					     GPI_SYS_UART0_RX)>;
> > +			bias-disable; /* external pull-up */
> > +			drive-strength = <2>;
> > +			input-enable;
> > +			input-schmitt-enable;
> > +			slew-rate = <0>;
> > +		};
> 
> 
> What is fixed in this hunk? Order of nodes is just a style, not a bug
> needing backports.

Please split this in two parts, with one for my screwed up conflict
resolution & one for the node ordering.

Thanks,
Conor.

Attachment: signature.asc
Description: PGP signature