Re: [PATCH v1 1/1] arm64: dts: freescale: Move Variscite Ethernet LEDs to carrier boards

From: Stefano Radaelli

Date: Thu Nov 05 2026 - 12:46:58 EST


On Thu, Nov 05, 2026 at 11:34:49AM -0600, Frank Li wrote:
> On Thu, Nov 05, 2026 at 11:17:39AM +0100, Stefano Radaelli wrote:
> > From: Stefano Radaelli <stefano.r@xxxxxxxxxxxxx>
> >
> > The Ethernet LEDs are physically on the carrier boards, but the
> > VAR-SOM-MX8MP, DART-MX91, VAR-SOM-MX93 and DART-MX95 module descriptions
> > include their LED nodes. Other carriers therefore inherit LED definitions
> > that may not match their wiring.
>
> what's impact?
>

Hi Frank,

There are two main points:

1. The SOM dtsi is intended to be reused with different carriers.
Defining the LEDs there forces every carrier to inherit the reference
board’s LED configuration. Customers then have to override those
definitions or explicitly delete the LED nodes if their carrier has no LEDs.
Keeping the definitions in the carrier DTS avoids requiring customers
to undo configuration for hardware that is not part of the SoM.

2. The Ethernet connectors, LEDs and their wiring are on the carrier.
Their definitions therefore belong in the carrier DTS, while the SOM dtsi
should describe the hardware on the module.
This change makes that separation consistent across our boards.

There is no functional change for the existing Symphony and Sonata boards:
their final device trees retain the same LED configuration.

Thank you Frank,
Best Regards,
Stefano