[PATCH 1/2] nvmem: imx-ocotp: use constant for write restriction

[Jose Diaz de Grenu]

Use a new constant instead of reusing config->word_size, which applies
both to read and writes. This allows to change config->word_size without
affecting to the write size restriction.

Signed-off-by: Jose Diaz de Grenu <Jose.DiazdeGrenu@xxxxxxxx>
---
 drivers/nvmem/imx-ocotp.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/nvmem/imx-ocotp.c b/drivers/nvmem/imx-ocotp.c
index 42d4451e7d67..dc86d863563a 100644
--- a/drivers/nvmem/imx-ocotp.c
+++ b/drivers/nvmem/imx-ocotp.c
@@ -29,6 +29,7 @@
 #define IMX_OCOTP_OFFSET_PER_WORD	0x10  /* Offset between the start addr
 					       * of two consecutive OTP words.
 					       */
+#define IMX_OTP_WORD_SIZE		4
 
 #define IMX_OCOTP_ADDR_CTRL		0x0000
 #define IMX_OCOTP_ADDR_CTRL_SET		0x0004
@@ -252,8 +253,8 @@ static int imx_ocotp_write(void *context, unsigned int offset, void *val,
 	u8 word = 0;
 
 	/* allow only writing one complete OTP word at a time */
-	if ((bytes != priv->config->word_size) ||
-	    (offset % priv->config->word_size))
+	if ((bytes != IMX_OTP_WORD_SIZE) ||
+	    (offset % IMX_OTP_WORD_SIZE))
 		return -EINVAL;
 
 	mutex_lock(&ocotp_mutex);
@@ -293,7 +294,7 @@ static int imx_ocotp_write(void *context, unsigned int offset, void *val,
 		 * see i.MX 7Solo Applications Processor Reference Manual, Rev.
 		 * 0.1 section 6.4.3.1
 		 */
-		offset = offset / priv->config->word_size;
+		offset = offset / IMX_OTP_WORD_SIZE;
 		waddr = offset / priv->params->bank_address_words;
 		word  = offset & (priv->params->bank_address_words - 1);
 	} else {