[RFC v4 1/6] nvmem: add driver for JZ4780 efuse

[H. Nikolaus Schaller]

From: PrasannaKumar Muralidharan <prasannatsmkumar@xxxxxxxxx>

This patch brings support for the JZ4780 efuse. Currently it only exposes
a read only access to the entire 8K bits efuse memory and nvmem cells.

Tested-by: Mathieu Malaterre <malat@xxxxxxxxxx>
Signed-off-by: PrasannaKumar Muralidharan <prasannatsmkumar@xxxxxxxxx>
Signed-off-by: Mathieu Malaterre <malat@xxxxxxxxxx>
Signed-off-by: H. Nikolaus Schaller <hns@xxxxxxxxxxxxx>
Signed-off-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
---
 drivers/nvmem/Kconfig        |  10 ++
 drivers/nvmem/Makefile       |   2 +
 drivers/nvmem/jz4780-efuse.c | 229 +++++++++++++++++++++++++++++++++++
 3 files changed, 241 insertions(+)
 create mode 100644 drivers/nvmem/jz4780-efuse.c

diff --git a/drivers/nvmem/Kconfig b/drivers/nvmem/Kconfig
index 35efab1ba8d9..8143e6e1dd82 100644
--- a/drivers/nvmem/Kconfig
+++ b/drivers/nvmem/Kconfig
@@ -55,6 +55,16 @@ config NVMEM_IMX_OCOTP_SCU
 	  This is a driver for the SCU On-Chip OTP Controller (OCOTP)
 	  available on i.MX8 SoCs.
 
+config JZ4780_EFUSE
+	tristate "JZ4780 EFUSE Memory Support"
+	depends on MACH_INGENIC || COMPILE_TEST
+	depends on HAS_IOMEM
+	help
+	  Say Y here to include support for JZ4780 efuse memory found on
+	  all JZ4780 SoC based devices.
+	  To compile this driver as a module, choose M here: the module
+	  will be called nvmem_jz4780_efuse.
+
 config NVMEM_LPC18XX_EEPROM
 	tristate "NXP LPC18XX EEPROM Memory Support"
 	depends on ARCH_LPC18XX || COMPILE_TEST
diff --git a/drivers/nvmem/Makefile b/drivers/nvmem/Makefile
index 6b466cd1427b..65a268d17807 100644
--- a/drivers/nvmem/Makefile
+++ b/drivers/nvmem/Makefile
@@ -18,6 +18,8 @@ obj-$(CONFIG_NVMEM_IMX_OCOTP)	+= nvmem-imx-ocotp.o
 nvmem-imx-ocotp-y		:= imx-ocotp.o
 obj-$(CONFIG_NVMEM_IMX_OCOTP_SCU)	+= nvmem-imx-ocotp-scu.o
 nvmem-imx-ocotp-scu-y		:= imx-ocotp-scu.o
+obj-$(CONFIG_JZ4780_EFUSE)		+= nvmem_jz4780_efuse.o
+nvmem_jz4780_efuse-y		:= jz4780-efuse.o
 obj-$(CONFIG_NVMEM_LPC18XX_EEPROM)	+= nvmem_lpc18xx_eeprom.o
 nvmem_lpc18xx_eeprom-y	:= lpc18xx_eeprom.o
 obj-$(CONFIG_NVMEM_LPC18XX_OTP)	+= nvmem_lpc18xx_otp.o
diff --git a/drivers/nvmem/jz4780-efuse.c b/drivers/nvmem/jz4780-efuse.c
new file mode 100644
index 000000000000..08b63de0e9cc
--- /dev/null
+++ b/drivers/nvmem/jz4780-efuse.c
@@ -0,0 +1,229 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * JZ4780 EFUSE Memory Support driver
+ *
+ * Copyright (c) 2017 PrasannaKumar Muralidharan <prasannatsmkumar@xxxxxxxxx>
+ * Copyright (c) 2020 H. Nikolaus Schaller <hns@xxxxxxxxxxxxx>
+ */
+
+/*
+ * Currently supports JZ4780 efuse which has 8K programmable bit.
+ * Efuse is separated into seven segments as below:
+ *
+ * -----------------------------------------------------------------------
+ * | 64 bit | 128 bit | 128 bit | 3520 bit | 8 bit | 2296 bit | 2048 bit |
+ * -----------------------------------------------------------------------
+ *
+ * The rom itself is accessed using a 9 bit address line and an 8 word wide bus
+ * which reads/writes based on strobes. The strobe is configured in the config
+ * register and is based on number of cycles of the bus clock.
+ *
+ * Driver supports read only as the writes are done in the Factory.
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/timer.h>
+
+#define JZ_EFUCTRL		(0x0)	/* Control Register */
+#define JZ_EFUCFG		(0x4)	/* Configure Register*/
+#define JZ_EFUSTATE		(0x8)	/* Status Register */
+#define JZ_EFUDATA(n)		(0xC + (n) * 4)
+
+#define EFUCTRL_ADDR_MASK	0x3FF
+#define EFUCTRL_ADDR_SHIFT	21
+#define EFUCTRL_LEN_MASK	0x1F
+#define EFUCTRL_LEN_SHIFT	16
+#define EFUCTRL_PG_EN		BIT(15)
+#define EFUCTRL_WR_EN		BIT(1)
+#define EFUCTRL_RD_EN		BIT(0)
+
+#define EFUCFG_INT_EN		BIT(31)
+#define EFUCFG_RD_ADJ_MASK	0xF
+#define EFUCFG_RD_ADJ_SHIFT	20
+#define EFUCFG_RD_STR_MASK	0xF
+#define EFUCFG_RD_STR_SHIFT	16
+#define EFUCFG_WR_ADJ_MASK	0xF
+#define EFUCFG_WR_ADJ_SHIFT	12
+#define EFUCFG_WR_STR_MASK	0xFFF
+#define EFUCFG_WR_STR_SHIFT	0
+
+#define EFUSTATE_WR_DONE	BIT(1)
+#define EFUSTATE_RD_DONE	BIT(0)
+
+struct jz4780_efuse {
+	struct device *dev;
+	struct regmap *map;
+	struct clk *clk;
+	unsigned int rd_adj;
+	unsigned int rd_strobe;
+};
+
+/* We read 32 byte chunks to avoid complexity in the driver. */
+static int jz4780_efuse_read_32bytes(struct jz4780_efuse *efuse, char *buf,
+				     unsigned int addr)
+{
+	unsigned int tmp;
+	u32 ctrl;
+	int ret;
+	const int size = 32;
+
+	ctrl = (addr << EFUCTRL_ADDR_SHIFT)
+		| ((size - 1) << EFUCTRL_LEN_SHIFT)
+		| EFUCTRL_RD_EN;
+
+	regmap_update_bits(efuse->map, JZ_EFUCTRL,
+			   (EFUCTRL_ADDR_MASK << EFUCTRL_ADDR_SHIFT) |
+			   (EFUCTRL_LEN_MASK << EFUCTRL_LEN_SHIFT) |
+			   EFUCTRL_PG_EN | EFUCTRL_WR_EN | EFUCTRL_RD_EN, ctrl);
+
+	ret = regmap_read_poll_timeout(efuse->map, JZ_EFUSTATE,
+				       tmp, tmp & EFUSTATE_RD_DONE,
+				       1 * MSEC_PER_SEC, 50 * MSEC_PER_SEC);
+	if (ret < 0) {
+		dev_err(efuse->dev, "Time out while reading efuse data");
+		return ret;
+	}
+
+	return regmap_bulk_read(efuse->map, JZ_EFUDATA(0),
+				buf, size / sizeof(u32));
+}
+
+/* main entry point */
+static int jz4780_efuse_read(void *context, unsigned int offset,
+			     void *val, size_t bytes)
+{
+	struct jz4780_efuse *efuse = context;
+	int ret;
+	const int size = 32;
+
+	while (bytes > 0) {
+		unsigned int start = offset & ~(size - 1);
+		unsigned int chunk = min(bytes, (start + size) - offset);
+
+		if (start == offset && chunk == size) {
+			ret = jz4780_efuse_read_32bytes(efuse, val, start);
+			if (ret < 0)
+				return ret;
+
+		} else {
+			char buf[32];
+
+			ret = jz4780_efuse_read_32bytes(efuse, buf, start);
+			if (ret < 0)
+				return ret;
+
+			memcpy(val, &buf[offset - start], chunk);
+		}
+
+		val += chunk;
+		offset += chunk;
+		bytes -= chunk;
+	}
+
+	return 0;
+}
+
+static struct nvmem_config jz4780_efuse_nvmem_config __initdata = {
+	.name = "jz4780-efuse",
+	.size = 1024,
+	.word_size = 1,
+	.stride = 1,
+	.owner = THIS_MODULE,
+	.reg_read = jz4780_efuse_read,
+};
+
+static const struct regmap_config jz4780_efuse_regmap_config = {
+	.reg_bits = 32,
+	.val_bits = 32,
+	.reg_stride = 4,
+	.max_register = JZ_EFUDATA(7),
+};
+
+static int jz4780_efuse_probe(struct platform_device *pdev)
+{
+	struct nvmem_device *nvmem;
+	struct jz4780_efuse *efuse;
+	struct nvmem_config cfg;
+	unsigned long clk_rate;
+	struct device *dev = &pdev->dev;
+	void __iomem *regs;
+
+	efuse = devm_kzalloc(dev, sizeof(*efuse), GFP_KERNEL);
+	if (!efuse)
+		return -ENOMEM;
+
+	regs = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(regs))
+		return PTR_ERR(regs);
+
+	efuse->map = devm_regmap_init_mmio(dev, regs,
+					   &jz4780_efuse_regmap_config);
+	if (IS_ERR(efuse->map))
+		return PTR_ERR(efuse->map);
+
+	efuse->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(efuse->clk))
+		return PTR_ERR(efuse->clk);
+
+	clk_rate = clk_get_rate(efuse->clk);
+
+	efuse->dev = dev;
+	/*
+	 * rd_adj and rd_strobe are 4 bit values
+	 * bus clk period * (rd_adj + 1) > 6.5ns
+	 * bus clk period * (rd_adj + 5 + rd_strobe) > 35ns
+	 */
+	efuse->rd_adj = (((6500 * (clk_rate / 1000000)) / 1000000) + 1) - 1;
+	efuse->rd_strobe = ((((35000 * (clk_rate / 1000000)) / 1000000) + 1)
+						- 5 - efuse->rd_adj);
+
+	if (efuse->rd_adj > 0x1F || efuse->rd_strobe > 0x1F) {
+		dev_err(&pdev->dev, "Cannot set clock configuration\n");
+		return -EINVAL;
+	}
+
+	regmap_update_bits(efuse->map, JZ_EFUCFG,
+			   (EFUCFG_RD_ADJ_MASK << EFUCFG_RD_ADJ_SHIFT) |
+			   (EFUCFG_RD_STR_MASK << EFUCFG_RD_STR_SHIFT),
+			   (efuse->rd_adj << EFUCFG_RD_ADJ_SHIFT) |
+			   (efuse->rd_strobe << EFUCFG_RD_STR_SHIFT));
+
+	cfg = jz4780_efuse_nvmem_config;
+	cfg.dev = &pdev->dev;
+	cfg.priv = efuse;
+
+	nvmem = devm_nvmem_register(dev, &cfg);
+	if (IS_ERR(nvmem))
+		return PTR_ERR(nvmem);
+
+	platform_set_drvdata(pdev, nvmem);
+
+	return 0;
+}
+
+static const struct of_device_id jz4780_efuse_match[] = {
+	{ .compatible = "ingenic,jz4780-efuse" },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, jz4780_efuse_match);
+
+static struct platform_driver jz4780_efuse_driver = {
+	.probe  = jz4780_efuse_probe,
+	.driver = {
+		.name = "jz4780-efuse",
+		.of_match_table = jz4780_efuse_match,
+	},
+};
+module_platform_driver(jz4780_efuse_driver);
+
+MODULE_AUTHOR("PrasannaKumar Muralidharan <prasannatsmkumar@xxxxxxxxx>");
+MODULE_AUTHOR("H. Nikolaus Schaller <hns@xxxxxxxxxxxxx>");
+MODULE_AUTHOR("Paul Cercueil <paul@xxxxxxxxxxxxxxx>");
+MODULE_DESCRIPTION("Ingenic JZ4780 efuse driver");
+MODULE_LICENSE("GPL v2");
-- 
2.23.0