[PATCH 2/5] dt-bindings: hwmon: Document adt7475 bypass-attenuator property

[Chris Packham]

From: Logan Shaw <logan.shaw@xxxxxxxxxxxxxxxxxxx>

Add documentation for the bypass-attenuator-in[0-4] property.

Signed-off-by: Logan Shaw <logan.shaw@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
---
 .../devicetree/bindings/hwmon/adt7475.yaml          | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/Documentation/devicetree/bindings/hwmon/adt7475.yaml b/Documentation/devicetree/bindings/hwmon/adt7475.yaml
index 2252499ea201..61da90c82649 100644
--- a/Documentation/devicetree/bindings/hwmon/adt7475.yaml
+++ b/Documentation/devicetree/bindings/hwmon/adt7475.yaml
@@ -39,6 +39,17 @@ properties:
   reg:
     maxItems: 1
 
+patternProperties:
+  "^bypass-attenuator-in[0-4]$":
+    maxItems: 1
+    minimum: 0
+    maximum: 1
+    description: |
+      Configures bypassing the individual voltage input attenuator. If
+      set to 1 the attenuator is bypassed if set to 0 the attenuator is
+      not bypassed. If the property is absent then the attenuator
+      retains it's configuration from the bios/bootloader.
+
 required:
   - compatible
   - reg
@@ -52,6 +63,8 @@ examples:
       hwmon@2e {
         compatible = "adi,adt7476";
         reg = <0x2e>;
+        bypass-attenuator-in0 = <1>;
+        bypass-attenuator-in1 = <0>;
       };
     };
 
-- 
2.25.0