Re: [PATCH 1/2] gpio: xilinx: Add clock adaptation support

[Bartosz Golaszewski]

pon., 17 lut 2020 o 11:57 Srinivas Neeli <srinivas.neeli@xxxxxxxxxx> napisaÅ(a):
>
> Add support of clock adaptation for AXI GPIO driver.
>
> Signed-off-by: Srinivas Neeli <srinivas.neeli@xxxxxxxxxx>
> ---
>  drivers/gpio/gpio-xilinx.c | 105 ++++++++++++++++++++++++++++++++++++++++++++-
>  1 file changed, 103 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpio/gpio-xilinx.c b/drivers/gpio/gpio-xilinx.c
> index a9748b5198e6..26753ae58295 100644
> --- a/drivers/gpio/gpio-xilinx.c
> +++ b/drivers/gpio/gpio-xilinx.c
> @@ -14,6 +14,8 @@
>  #include <linux/io.h>
>  #include <linux/gpio/driver.h>
>  #include <linux/slab.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/clk.h>
>
>  /* Register Offset Definitions */
>  #define XGPIO_DATA_OFFSET   (0x0)      /* Data register  */
> @@ -38,6 +40,7 @@
>   * @gpio_state: GPIO state shadow register
>   * @gpio_dir: GPIO direction shadow register
>   * @gpio_lock: Lock used for synchronization
> + * @clk: clock resource for this driver
>   */
>  struct xgpio_instance {
>         struct gpio_chip gc;
> @@ -45,7 +48,8 @@ struct xgpio_instance {
>         unsigned int gpio_width[2];
>         u32 gpio_state[2];
>         u32 gpio_dir[2];
> -       spinlock_t gpio_lock[2];
> +       spinlock_t gpio_lock[2];        /* For serializing operations */
> +       struct clk *clk;
>  };
>
>  static inline int xgpio_index(struct xgpio_instance *chip, int gpio)
> @@ -255,6 +259,70 @@ static void xgpio_save_regs(struct xgpio_instance *chip)
>                        chip->gpio_dir[1]);
>  }
>
> +static int xgpio_request(struct gpio_chip *chip, unsigned int offset)
> +{
> +       int ret = pm_runtime_get_sync(chip->parent);
> +
> +       /*
> +        * If the device is already active pm_runtime_get() will return 1 on
> +        * success, but gpio_request still needs to return 0.
> +        */
> +       return ret < 0 ? ret : 0;
> +}
> +
> +static void xgpio_free(struct gpio_chip *chip, unsigned int offset)
> +{
> +       pm_runtime_put(chip->parent);
> +}
> +
> +static int __maybe_unused xgpio_suspend(struct device *dev)
> +{
> +       struct platform_device *pdev = to_platform_device(dev);
> +       int irq = platform_get_irq(pdev, 0);
> +       struct irq_data *data = irq_get_irq_data(irq);
> +
> +       if (!irqd_is_wakeup_set(data))
> +               return pm_runtime_force_suspend(dev);
> +
> +       return 0;
> +}
> +
> +static int __maybe_unused xgpio_resume(struct device *dev)
> +{
> +       struct platform_device *pdev = to_platform_device(dev);
> +       int irq = platform_get_irq(pdev, 0);
> +       struct irq_data *data = irq_get_irq_data(irq);
> +
> +       if (!irqd_is_wakeup_set(data))
> +               return pm_runtime_force_resume(dev);
> +
> +       return 0;
> +}
> +
> +static int __maybe_unused xgpio_runtime_suspend(struct device *dev)
> +{
> +       struct platform_device *pdev = to_platform_device(dev);
> +       struct xgpio_instance *gpio = platform_get_drvdata(pdev);
> +
> +       clk_disable(gpio->clk);
> +
> +       return 0;
> +}
> +
> +static int __maybe_unused xgpio_runtime_resume(struct device *dev)
> +{
> +       struct platform_device *pdev = to_platform_device(dev);
> +       struct xgpio_instance *gpio = platform_get_drvdata(pdev);
> +
> +       return clk_enable(gpio->clk);
> +}
> +
> +static const struct dev_pm_ops xgpio_dev_pm_ops = {
> +       SET_SYSTEM_SLEEP_PM_OPS(xgpio_suspend, xgpio_resume)
> +       SET_RUNTIME_PM_OPS(xgpio_runtime_suspend,
> +                          xgpio_runtime_resume, NULL)
> +};
> +
>  /**
>   * xgpio_of_probe - Probe method for the GPIO device.
>   * @pdev: pointer to the platform device
> @@ -323,6 +391,8 @@ static int xgpio_probe(struct platform_device *pdev)
>         chip->gc.direction_output = xgpio_dir_out;
>         chip->gc.get = xgpio_get;
>         chip->gc.set = xgpio_set;
> +       chip->gc.request = xgpio_request;
> +       chip->gc.free = xgpio_free;
>         chip->gc.set_multiple = xgpio_set_multiple;
>
>         chip->gc.label = dev_name(&pdev->dev);
> @@ -333,15 +403,45 @@ static int xgpio_probe(struct platform_device *pdev)
>                 return PTR_ERR(chip->regs);
>         }
>
> +       chip->clk = devm_clk_get(&pdev->dev, "s_axi_aclk");
> +       if (IS_ERR(chip->clk)) {
> +               if (PTR_ERR(chip->clk) != -ENOENT) {
> +                       if (PTR_ERR(chip->clk) != -EPROBE_DEFER)
> +                               dev_err(&pdev->dev, "Input clock not found\n");
> +                       return PTR_ERR(chip->clk);
> +               }
> +               /*
> +                * Clock framework support is optional, continue on
> +                * anyways if we don't find a matching clock.
> +                */

Why not use devm_clk_get_optional() then?

> +               chip->clk = NULL;
> +       }
> +       status = clk_prepare_enable(chip->clk);
> +       if (status < 0) {
> +               dev_err(&pdev->dev, "Failed to prepare clk\n");
> +               return status;
> +       }
> +       pm_runtime_enable(&pdev->dev);
> +       status = pm_runtime_get_sync(&pdev->dev);
> +       if (status < 0)
> +               goto err_unprepare_clk;
> +
>         xgpio_save_regs(chip);
>
>         status = devm_gpiochip_add_data(&pdev->dev, &chip->gc, chip);
>         if (status) {
>                 dev_err(&pdev->dev, "failed to add GPIO chip\n");
> -               return status;
> +               goto err_pm_put;
>         }
>
> +       pm_runtime_put(&pdev->dev);
>         return 0;
> +err_pm_put:
> +       pm_runtime_put(&pdev->dev);
> +err_unprepare_clk:
> +       pm_runtime_disable(&pdev->dev);
> +       clk_unprepare(chip->clk);
> +       return status;
>  }
>
>  static const struct of_device_id xgpio_of_match[] = {
> @@ -356,6 +456,7 @@ static struct platform_driver xgpio_plat_driver = {
>         .driver         = {
>                         .name = "gpio-xilinx",
>                         .of_match_table = xgpio_of_match,
> +                       .pm = &xgpio_dev_pm_ops,
>         },
>  };
>
> --
> 2.7.4
>