[PATCH v2 08/14] ARM: imx: imx7ulp: support HSRUN mode

[peng . fan]

From: Peng Fan <peng.fan@xxxxxxx>

Configure PMPROT to let ARM core could run into HSRUN mode.
In LDO-enabled mode, HSRUN mode is not allowed, so add a check before
configure PMPROT.

Signed-off-by: Peng Fan <peng.fan@xxxxxxx>
---
 arch/arm/mach-imx/pm-imx7ulp.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/arch/arm/mach-imx/pm-imx7ulp.c b/arch/arm/mach-imx/pm-imx7ulp.c
index 2e756d8191fa..393faf1e8382 100644
--- a/arch/arm/mach-imx/pm-imx7ulp.c
+++ b/arch/arm/mach-imx/pm-imx7ulp.c
@@ -11,6 +11,10 @@
 
 #include "common.h"
 
+#define PMC0_CTRL		0x28
+#define BM_CTRL_LDOEN		BIT(31)
+
+#define SMC_PMPROT		0x8
 #define SMC_PMCTRL		0x10
 #define BP_PMCTRL_PSTOPO        16
 #define PSTOPO_PSTOP3		0x3
@@ -25,7 +29,10 @@
 #define BM_PMCTRL_RUNM		(3 << BP_PMCTRL_RUNM)
 #define BM_PMCTRL_STOPM		(7 << BP_PMCTRL_STOPM)
 
+#define BM_PMPROT_AHSRUN	BIT(7)
+
 static void __iomem *smc1_base;
+static void __iomem *pmc0_base;
 
 int imx7ulp_set_lpm(enum ulp_cpu_pwr_mode mode)
 {
@@ -65,5 +72,13 @@ void __init imx7ulp_pm_init(void)
 	of_node_put(np);
 	WARN_ON(!smc1_base);
 
+	np = of_find_compatible_node(NULL, NULL, "fsl,imx7ulp-pmc0");
+	pmc0_base = of_iomap(np, 0);
+	WARN_ON(!pmc0_base);
+	of_node_put(np);
+
+	if (!(readl_relaxed(pmc0_base + PMC0_CTRL) & BM_CTRL_LDOEN))
+		writel_relaxed(BM_PMPROT_AHSRUN, smc1_base + SMC_PMPROT);
+
 	imx7ulp_set_lpm(ULP_PM_RUN);
 }
-- 
2.16.4