Re: [RFC] Display the cpu of sched domain in procfs

[Chen Yu]

Hi Dietmar,

On Wed, Feb 19, 2020 at 4:53 PM Dietmar Eggemann
<dietmar.eggemann@xxxxxxx> wrote:
>
> On 19/02/2020 09:13, Valentin Schneider wrote:
> > Hi,
> >
> > On 19/02/2020 07:15, Chen Yu wrote:
> >> Problem:
> >> sched domain topology is not always consistent with the CPU topology exposed at
> >> /sys/devices/system/cpu/cpuX/topology,  which makes it
> >> hard for monitor tools to distinguish the CPUs among different sched domains.
> >>
> >> For example, on x86 if there are NUMA nodes within a package, say,
> >> SNC(Sub-Numa-Cluster),
> >> then there would be no die sched domain but only NUMA sched domains
> >> created. As a result,
> >> you don't know what the sched domain hierarchical is by only looking
> >> at /sys/devices/system/cpu/cpuX/topology.
> >>
> >> Although by appending sched_debug in command line would show the sched
> >> domain CPU topology,
> >> it is only printed once during boot up, which makes it hard to track
> >> at run-time.
>
> What about /proc/schedstat?
>
That's it!  I did not notice it before, this should work although the
user space might
need to parse the format.


-- 
Thanks,
Chenyu
> E.g. on Intel Xeon CPU E5-2690 v2
>
> $ cat /proc/schedstat | head
> version 15
> timestamp 4486170100
> cpu0 0 0 0 0 0 0 59501267037720 16902762382193 1319621004
> domain0 00,00100001 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
> domain1 00,3ff003ff 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
> domain2 ff,ffffffff 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
>
>         ^^^^^^^^^^^
>
> cpu1 0 0 0 0 0 0 56045879920164 16758983055410 1318489275
> domain0 00,00200002 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
> domain1 00,3ff003ff 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
> domain2 ff,ffffffff 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
> ...
>