Re: [PATCH V2 0/9] mmc: mmci: sdmmc: add sdr104 support
From: Ulf Hansson
Date: Wed Feb 19 2020 - 05:29:30 EST
On Tue, 28 Jan 2020 at 10:06, Ludovic Barre <ludovic.barre@xxxxxx> wrote:
>
> To support the sdr104 mode, sdmmc variant needs:
> -Hardware delay block support for sdmmc variant
> with tuning procedure
> -Voltage switch callbacks
> -sdmmc revision 2.0
>
> V2:
> -regroup host->mmc_ops & mmc->ops assignment
> -add timeout define
> -rename prep_volt_switch to pre_sig_volt_switch
> -rename volt_switch to post_sig_volt_switch
> -add 'why' comment for "mmc: mmci: add volt_switch callbacks"
>
> Ludovic Barre (9):
> mmc: mmci: sdmmc: replace sg_dma_xxx macros
> mmc: mmci: sdmmc: rename sdmmc_priv struct to sdmmc_idma
> mmc: mmci: add a reference at mmc_host_ops in mmci struct
> mmc: mmci: add private pointer for variant
> dt-bindings: mmc: mmci: add delay block base register for sdmmc
> mmc: mmci: sdmmc: add execute tuning with delay block
> mmc: mmci: add volt_switch callbacks
> mmc: mmci: sdmmc: add voltage switch functions
> mmc: mmci: add sdmmc variant revision 2.0
>
> .../devicetree/bindings/mmc/mmci.txt | 2 +
> drivers/mmc/host/mmci.c | 42 +++-
> drivers/mmc/host/mmci.h | 8 +
> drivers/mmc/host/mmci_stm32_sdmmc.c | 204 +++++++++++++++++-
> 4 files changed, 248 insertions(+), 8 deletions(-)
>
> --
> 2.17.1
>
Applied for next, thanks!
I took the liberty to do minor amendments to some of the changelogs,
but in particular I have change some of prefixes for the commit
message headers into "mmc: mmci_sdmmc:".
Please tell, if there is anything that you want me to update.
Kind regards
Uffe