[PATCH v2 1/4] soc: bcm2835: Sync xHCI reset firmware property with downstream

[Nicolas Saenz Julienne]

The property is needed in order to trigger VL805's firmware load.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
---

Note that there is a gap between the property introduced and the previous
one. This is also the case downstream.

Changes since v1:
 - move into own patch

 include/soc/bcm2835/raspberrypi-firmware.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/soc/bcm2835/raspberrypi-firmware.h b/include/soc/bcm2835/raspberrypi-firmware.h
index 7800e12ee042..cc9cdbc66403 100644
--- a/include/soc/bcm2835/raspberrypi-firmware.h
+++ b/include/soc/bcm2835/raspberrypi-firmware.h
@@ -90,7 +90,7 @@ enum rpi_firmware_property_tag {
 	RPI_FIRMWARE_SET_PERIPH_REG =                         0x00038045,
 	RPI_FIRMWARE_GET_POE_HAT_VAL =                        0x00030049,
 	RPI_FIRMWARE_SET_POE_HAT_VAL =                        0x00030050,
-
+	RPI_FIRMWARE_NOTIFY_XHCI_RESET =                      0x00030058,
 
 	/* Dispmanx TAGS */
 	RPI_FIRMWARE_FRAMEBUFFER_ALLOCATE =                   0x00040001,
-- 
2.25.0