Re: [PATCH net-next 2/3] net: phy: broadcom: Have bcm54xx_adjust_rxrefclk() check for flags

[Florian Fainelli]

On 2/15/20 8:08 AM, Andrew Lunn wrote:
> On Fri, Feb 14, 2020 at 03:38:52PM -0800, Florian Fainelli wrote:
>> bcm54xx_adjust_rxrefclk() already checks for the flags and will
>> correctly reacting to the 3 different flags it check, allow it to be
>> unconditionally called.
>>
>> Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
>> ---
>>  drivers/net/phy/broadcom.c | 5 +----
>>  1 file changed, 1 insertion(+), 4 deletions(-)
>>
>> diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c
>> index 4ad2128cc454..b4eae84a9195 100644
>> --- a/drivers/net/phy/broadcom.c
>> +++ b/drivers/net/phy/broadcom.c
>> @@ -273,10 +273,7 @@ static int bcm54xx_config_init(struct phy_device *phydev)
>>  	    (phydev->dev_flags & PHY_BRCM_CLEAR_RGMII_MODE))
>>  		bcm_phy_write_shadow(phydev, BCM54XX_SHD_RGMII_MODE, 0);
>>  
>> -	if ((phydev->dev_flags & PHY_BRCM_RX_REFCLK_UNUSED) ||
>> -	    (phydev->dev_flags & PHY_BRCM_DIS_TXCRXC_NOENRGY) ||
>> -	    (phydev->dev_flags & PHY_BRCM_AUTO_PWRDWN_ENABLE))
>> -		bcm54xx_adjust_rxrefclk(phydev);
>> +	bcm54xx_adjust_rxrefclk(phydev);
> 
> Hi Florian
> 
> PHY_BRCM_RX_REFCLK_UNUSED is not unconditionally checked in
> bcm54xx_adjust_rxrefclk(), where as here it is. I assume this is O.K?
> The same is tree for PHY_BRCM_AUTO_PWRDWN_ENABLE.  Maybe worth a
> comment in the commit message if you need to respin.

Indeed, let me correct that in the commit message.
-- 
Florian