[PATCH v1 2/4] dt-bindings: display: msm: Add required dma-range property

[Jordan Crouse]

The GMU node now requires a specific dma-range property so that the driver
can use the DMA API to do the few memory allocations required by the GMU.
This sets the IOMMU iova allocadtor to match the 'uncached' part of the
GMU virtual address space.

Signed-off-by: Jordan Crouse <jcrouse@xxxxxxxxxxxxxx>
---

 Documentation/devicetree/bindings/display/msm/gmu.yaml | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/msm/gmu.yaml b/Documentation/devicetree/bindings/display/msm/gmu.yaml
index 776ff92..6952d5a 100644
--- a/Documentation/devicetree/bindings/display/msm/gmu.yaml
+++ b/Documentation/devicetree/bindings/display/msm/gmu.yaml
@@ -83,6 +83,13 @@ properties:
       Phandle to the OPP table for the available GMU frequencies. Refer to
       ../../opp/opp.txt for more information.
 
+  dma-ranges:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description:
+      Describe the dma-address range for the device. This should always
+      describe the range between 0x60000000 and 0x80000000 which represents
+      the uncached region of the GMU address space.
+
 required:
   - compatible
   - reg
@@ -95,6 +102,7 @@ required:
   - power-domain-names
   - iommus
   - operating-points-v2
+  - dma-ranges
 
 examples:
  - |
@@ -127,4 +135,6 @@ examples:
 
         iommus = <&adreno_smmu 5>;
         operating-points-v2 = <&gmu_opp_table>;
+
+        dma-ranges = <0 0x60000000 0 0x60000000 0 0x80000000>;
    };
-- 
2.7.4