Re: [Xen-devel] [RFC PATCH v3 06/12] xen-blkfront: add callbacks for PM suspend and hibernation

[Roger Pau MonnÃ]

On Thu, Feb 20, 2020 at 08:54:36AM +0000, Durrant, Paul wrote:
> > -----Original Message-----
> > From: Xen-devel <xen-devel-bounces@xxxxxxxxxxxxxxxxxxxx> On Behalf Of
> > Roger Pau MonnÃ
> > Sent: 20 February 2020 08:39
> > To: Agarwal, Anchal <anchalag@xxxxxxxxxx>
> > Cc: Valentin, Eduardo <eduval@xxxxxxxxxx>; len.brown@xxxxxxxxx;
> > peterz@xxxxxxxxxxxxx; benh@xxxxxxxxxxxxxxxxxxx; x86@xxxxxxxxxx; linux-
> > mm@xxxxxxxxx; pavel@xxxxxx; hpa@xxxxxxxxx; tglx@xxxxxxxxxxxxx;
> > sstabellini@xxxxxxxxxx; fllinden@xxxxxxxxxx; Kamata, Munehisa
> > <kamatam@xxxxxxxxxx>; mingo@xxxxxxxxxx; xen-devel@xxxxxxxxxxxxxxxxxxxx;
> > Singh, Balbir <sblbir@xxxxxxxxxx>; axboe@xxxxxxxxx;
> > konrad.wilk@xxxxxxxxxx; bp@xxxxxxxxx; boris.ostrovsky@xxxxxxxxxx;
> > jgross@xxxxxxxx; netdev@xxxxxxxxxxxxxxx; linux-pm@xxxxxxxxxxxxxxx;
> > rjw@xxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; vkuznets@xxxxxxxxxx;
> > davem@xxxxxxxxxxxxx; Woodhouse, David <dwmw@xxxxxxxxxxxx>
> > Subject: Re: [Xen-devel] [RFC PATCH v3 06/12] xen-blkfront: add callbacks
> > for PM suspend and hibernation
> > 
> > Thanks for this work, please see below.
> > 
> > On Wed, Feb 19, 2020 at 06:04:24PM +0000, Anchal Agarwal wrote:
> > > On Tue, Feb 18, 2020 at 10:16:11AM +0100, Roger Pau Monnà wrote:
> > > > On Mon, Feb 17, 2020 at 11:05:53PM +0000, Anchal Agarwal wrote:
> > > > > On Mon, Feb 17, 2020 at 11:05:09AM +0100, Roger Pau Monnà wrote:
> > > > > > On Fri, Feb 14, 2020 at 11:25:34PM +0000, Anchal Agarwal wrote:
> > > > > Quiescing the queue seemed a better option here as we want to make
> > sure ongoing
> > > > > requests dispatches are totally drained.
> > > > > I should accept that some of these notion is borrowed from how nvme
> > freeze/unfreeze
> > > > > is done although its not apple to apple comparison.
> > > >
> > > > That's fine, but I would still like to requests that you use the same
> > > > logic (as much as possible) for both the Xen and the PM initiated
> > > > suspension.
> > > >
> > > > So you either apply this freeze/unfreeze to the Xen suspension (and
> > > > drop the re-issuing of requests on resume) or adapt the same approach
> > > > as the Xen initiated suspension. Keeping two completely different
> > > > approaches to suspension / resume on blkfront is not suitable long
> > > > term.
> > > >
> > > I agree with you on overhaul of xen suspend/resume wrt blkfront is a
> > good
> > > idea however, IMO that is a work for future and this patch series should
> > > not be blocked for it. What do you think?
> > 
> > It's not so much that I think an overhaul of suspend/resume in
> > blkfront is needed, it's just that I don't want to have two completely
> > different suspend/resume paths inside blkfront.
> > 
> > So from my PoV I think the right solution is to either use the same
> > code (as much as possible) as it's currently used by Xen initiated
> > suspend/resume, or to also switch Xen initiated suspension to use the
> > newly introduced code.
> > 
> > Having two different approaches to suspend/resume in the same driver
> > is a recipe for disaster IMO: it adds complexity by forcing developers
> > to take into account two different suspend/resume approaches when
> > there's no need for it.
> 
> I disagree. S3 or S4 suspend/resume (or perhaps we should call them power state transitions to avoid confusion) are quite different from Xen suspend/resume.
> Power state transitions ought to be, and indeed are, visible to the software running inside the guest. Applications, as well as drivers, can receive notification and take whatever action they deem appropriate.
> Xen suspend/resume OTOH is used when a guest is migrated and the code should go to all lengths possible to make any software running inside the guest (other than Xen specific enlightened code, such as PV drivers) completely unaware that anything has actually happened.

So from what you say above PM state transitions are notified to all
drivers, and Xen suspend/resume is only notified to PV drivers, and
here we are speaking about blkfront which is a PV driver, and should
get notified in both cases. So I'm unsure why the same (or at least
very similar) approach can't be used in both cases.

The suspend/resume approach proposed by this patch is completely
different than the one used by a xenbus initiated suspend/resume, and
I don't see a technical reason that warrants this difference.

I'm not saying that the approach used here is wrong, it's just that I
don't see the point in having two different ways to do suspend/resume
in the same driver, unless there's a technical reason for it, which I
don't think has been provided.

I would be fine with switching xenbus initiated suspend/resume to also
use the approach proposed here: freeze the queues and drain the shared
rings before suspending.

> So, whilst it may be possible to use common routines to, for example, re-establish PV frontend/backend communication, PV frontend code should be acutely aware of the circumstances they are operating in. I can cite example code in the Windows PV driver, which have supported guest S3/S4 power state transitions since day 1.

Hm, please bear with me, as I'm not sure I fully understand. Why isn't
the current suspend/resume logic suitable for PM transitions?

As said above, I'm happy to switch xenbus initiated suspend/resume to
use the logic in this patch, but unless there's a technical reason for
it I don't see why blkfront should have two completely different
approaches to suspend/resume depending on whether it's a PM or a
xenbus state change.

Thanks, Roger.