Re: [PATCH 1/5] drm/sun4i: tcon: Introduce LVDS setup routine setting

[Maxime Ripard]

On Wed, Feb 19, 2020 at 08:08:54PM +0200, Andrey Lebedev wrote:
> From: Andrey Lebedev <andrey@xxxxxxxxxx>
>
> Different sunxi flavors require slightly different sequence for enabling
> LVDS output. This allows to differentiate between them.
>
> Signed-off-by: Andrey Lebedev <andrey@xxxxxxxxxx>
> ---
>  drivers/gpu/drm/sun4i/sun4i_tcon.c | 68 ++++++++++++++++--------------
>  drivers/gpu/drm/sun4i/sun4i_tcon.h |  3 ++
>  2 files changed, 39 insertions(+), 32 deletions(-)
>
> diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c
> index c81cdce6ed55..cc6b05ca2c69 100644
> --- a/drivers/gpu/drm/sun4i/sun4i_tcon.c
> +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c
> @@ -114,46 +114,48 @@ static void sun4i_tcon_channel_set_status(struct sun4i_tcon *tcon, int channel,
>  	}
>  }
>
> +static void sun6i_tcon_setup_lvds_phy(struct sun4i_tcon *tcon,
> +				      const struct drm_encoder *encoder)
> +{
> +	u8 val;
> +
> +	regmap_write(tcon->regs, SUN4I_TCON0_LVDS_ANA0_REG,
> +		     SUN6I_TCON0_LVDS_ANA0_C(2) |
> +		     SUN6I_TCON0_LVDS_ANA0_V(3) |
> +		     SUN6I_TCON0_LVDS_ANA0_PD(2) |
> +		     SUN6I_TCON0_LVDS_ANA0_EN_LDO);
> +	udelay(2);
> +
> +	regmap_update_bits(tcon->regs, SUN4I_TCON0_LVDS_ANA0_REG,
> +			   SUN6I_TCON0_LVDS_ANA0_EN_MB,
> +			   SUN6I_TCON0_LVDS_ANA0_EN_MB);
> +	udelay(2);
> +
> +	regmap_update_bits(tcon->regs, SUN4I_TCON0_LVDS_ANA0_REG,
> +			   SUN6I_TCON0_LVDS_ANA0_EN_DRVC,
> +			   SUN6I_TCON0_LVDS_ANA0_EN_DRVC);
> +
> +	if (sun4i_tcon_get_pixel_depth(encoder) == 18)
> +		val = 7;
> +	else
> +		val = 0xf;
> +
> +	regmap_write_bits(tcon->regs, SUN4I_TCON0_LVDS_ANA0_REG,
> +			  SUN6I_TCON0_LVDS_ANA0_EN_DRVD(0xf),
> +			  SUN6I_TCON0_LVDS_ANA0_EN_DRVD(val));
> +
> +}
> +

There's an extra blank line here that was reported by checkpatch. I've
fixed it up while applying.

Maxime

Attachment: signature.asc
Description: PGP signature