Re: [PATCH v3 5/8] arm64: dts: qcom: sdm845: Add IMEM and PIL info region

[Mathieu Poirier]

On Mon, Feb 10, 2020 at 04:50:56PM -0800, Bjorn Andersson wrote:
> Add a simple-mfd representing IMEM on SDM845 and define the PIL
> relocation info region, so that post mortem tools will be able to locate
> the loaded remoteprocs.
> 
> Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> ---
> 
> Changes since v2:
> - Replace offset with reg
> 
>  arch/arm64/boot/dts/qcom/sdm845.dtsi | 13 +++++++++++++
>  1 file changed, 13 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> index d42302b8889b..3443d989976c 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> @@ -3018,6 +3018,19 @@ spmi_bus: spmi@c440000 {
>  			cell-index = <0>;
>  		};
>  
> +		imem@146bf000 {
> +			compatible = "syscon", "simple-mfd";
> +			reg = <0 0x146bf000 0 0x1000>;
> +
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +
> +			pil-reloc@94c {
> +				compatible ="qcom,pil-reloc-info";

s/="/= "

> +				reg = <0x94c 200>;
> +			};
> +		};
> +
>  		apps_smmu: iommu@15000000 {
>  			compatible = "qcom,sdm845-smmu-500", "arm,mmu-500";
>  			reg = <0 0x15000000 0 0x80000>;
> -- 
> 2.24.0
>