Re: [PATCH 2/6] drm/bridge: anx6345: Clean up error handling in probe()

[Vasily Khoruzhick]

On Thu, Feb 20, 2020 at 5:53 AM Laurent Pinchart
<laurent.pinchart@xxxxxxxxxxxxxxxx> wrote:
>
> Hi Vasily,

Hi Laurent,

> Thank you for the patch.
>
> On Thu, Feb 20, 2020 at 12:35:04AM -0800, Vasily Khoruzhick wrote:
> > devm_regulator_get() returns either a dummy regulator or -EPROBE_DEFER,
> > we don't need to print scary message in either case.
> >
> > Signed-off-by: Vasily Khoruzhick <anarsoul@xxxxxxxxx>
> > ---
> >  drivers/gpu/drm/bridge/analogix/analogix-anx6345.c | 8 ++------
> >  1 file changed, 2 insertions(+), 6 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/bridge/analogix/analogix-anx6345.c b/drivers/gpu/drm/bridge/analogix/analogix-anx6345.c
> > index 0d8d083b0207..0204bbe4f0a0 100644
> > --- a/drivers/gpu/drm/bridge/analogix/analogix-anx6345.c
> > +++ b/drivers/gpu/drm/bridge/analogix/analogix-anx6345.c
> > @@ -713,17 +713,13 @@ static int anx6345_i2c_probe(struct i2c_client *client,
> >
> >       /* 1.2V digital core power regulator  */
> >       anx6345->dvdd12 = devm_regulator_get(dev, "dvdd12");
> > -     if (IS_ERR(anx6345->dvdd12)) {
> > -             DRM_ERROR("dvdd12-supply not found\n");
> > +     if (IS_ERR(anx6345->dvdd12))
> >               return PTR_ERR(anx6345->dvdd12);
> > -     }
>
> There could be other errors such as -EBUSY or -EPERM. The following
> would ensure a message gets printed in those cases, while avoiding
> spamming the kernel log in the EPROBE_DEFER case.
>
>         if (IS_ERR(anx6345->dvdd12)) {
>                 if (PTR_ERR(anx6345->dvdd12) != -EPROBE_DEFER)
>                         DRM_ERROR("Failed to get dvdd12 supply (%d)\n",
>                                   PTR_ERR(anx6345->dvdd12));
>                 return PTR_ERR(anx6345->dvdd12);
>         }
>
> But maybe it's overkill ? With or without that change (for the second
> regulator below too),

Thanks, I'll do as you suggested.



> Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
>
> >       /* 2.5V digital core power regulator  */
> >       anx6345->dvdd25 = devm_regulator_get(dev, "dvdd25");
> > -     if (IS_ERR(anx6345->dvdd25)) {
> > -             DRM_ERROR("dvdd25-supply not found\n");
> > +     if (IS_ERR(anx6345->dvdd25))
> >               return PTR_ERR(anx6345->dvdd25);
> > -     }
> >
> >       /* GPIO for chip reset */
> >       anx6345->gpiod_reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
>
> --
> Regards,
>
> Laurent Pinchart