Re: [PATCH v2 4/4] mtd: rawnand: Add support Macronix deep power down mode

[masonccyang]

Hi Miquel,

 
> > Macronix AD series support deep power down mode for a minimum
> > power consumption state.
> > 
> > Patch nand_suspend() & nand_resume() by Macronix specific
> > deep power down mode command and exit it.
> > 
> > Signed-off-by: Mason Yang <masonccyang@xxxxxxxxxxx>
> > ---
> >  drivers/mtd/nand/raw/nand_macronix.c | 72 
+++++++++++++++++++++++++++++++++++-
> >  1 file changed, 70 insertions(+), 2 deletions(-)
> > 
> > diff --git a/drivers/mtd/nand/raw/nand_macronix.c 
b/drivers/mtd/nand/raw/
> nand_macronix.c
> > index 13929bf..3098bc0 100644
> > --- a/drivers/mtd/nand/raw/nand_macronix.c
> > +++ b/drivers/mtd/nand/raw/nand_macronix.c
> > @@ -15,6 +15,8 @@
> >  #define MXIC_BLOCK_PROTECTION_ALL_LOCK 0x38
> >  #define MXIC_BLOCK_PROTECTION_ALL_UNLOCK 0x0
> > 
> > +#define NAND_CMD_POWER_DOWN 0xB9
> 
> I suppose this value is Macronix specific, and hence should have a
> MACRONIX_ or MXIC_ prefix instead of NAND_.

okay, will patch it to
#define MXIC_CMD_POWER_DOWN 0xB9

> 
> > +
> >  struct nand_onfi_vendor_macronix {
> >     u8 reserved;
> >     u8 reliability_func;
> > @@ -137,13 +139,66 @@ static int mxic_nand_unlock(struct nand_chip 
*chip, 
> loff_t ofs, uint64_t len)
> >     return ret;
> >  }
> > 
> > +int nand_power_down_op(struct nand_chip *chip)
> > +{
> > +   int ret;
> > +
> > +   if (nand_has_exec_op(chip)) {
> > +      struct nand_op_instr instrs[] = {
> > +         NAND_OP_CMD(NAND_CMD_POWER_DOWN, 0),
> > +      };
> > +
> > +      struct nand_operation op = NAND_OPERATION(chip->cur_cs, 
instrs);
> > +
> > +      ret = nand_exec_op(chip, &op);
> > +      if (ret)
> > +         return ret;
> > +
> > +   } else {
> > +      chip->legacy.cmdfunc(chip, NAND_CMD_POWER_DOWN, -1, -1);
> > +   }
> > +
> > +   return 0;
> > +}
> > +
> > +static int mxic_nand_suspend(struct nand_chip *chip)
> > +{
> > +   int ret;
> > +
> > +   nand_select_target(chip, 0);
> > +   ret = nand_power_down_op(chip);
> > +   if (ret < 0)
> > +      pr_err("%s called for chip into suspend failed\n", __func__);
> 
> What about something more specific?
> 
>        "Suspending MXIC NAND chip failed (%)\n", ret

okay, patch it with this sentence, thanks.

> 
> > +   nand_deselect_target(chip);
> > +
> > +   return ret;
> > +}
> > +
> > +static void mxic_nand_resume(struct nand_chip *chip)
> > +{
> > +   /*
> > +    * Toggle #CS pin to resume NAND device and don't care
> > +    * of the others CLE, #WE, #RE pins status.
> > +    * Here sending power down command to toggle #CS line.
> 
> The first sentence seems right, the second could be upgraded:
> 
>            The purpose of doing a power down operation is just to
>            ensure some bytes will be sent over the NAND bus so that #CS
>            gets toggled because this is why the chip is woken up.
>       The content of the bytes sent on the NAND bus are not
>       relevant at this time. Sending bytes on the bus is mandatory
>       for a lot of NAND controllers otherwise they are not able to
>       just assert/de-assert #CS.

okay, will patch the second sentence based on your comments.
i.e,.

 /*
  * Toggle #CS pin to resume NAND device and don't care
  * of the others CLE, #WE, #RE pins status.
  * A NAND controller ensure it is able to assert/de-assert #CS
  * by sending any byte over the NAND bus.
  * i.e.,
  * NAND power down command or reset command.
  */ 

> 
> > +    */
> > +   nand_select_target(chip, 0);
> > +   nand_power_down_op(chip);
> 
> Are you sure sending a power_down_op will not be interpreted by the
> chip?

yes, sure !

> 
> I would expect a sleeping delay here, even small.

okay, will patch it.

> 
> > +   nand_deselect_target(chip);
> > +}
> > +
> >  /*
> > - * Macronix NAND AC series support Block Protection by SET_FEATURES
> > + * Macronix NAND AC & AD series support Block Protection by 
SET_FEATURES
> >   * to lock/unlock blocks.
> >   */
> >  static int macronix_nand_init(struct nand_chip *chip)
> >  {
> > -   bool blockprotected = false;
> > +   unsigned int i;
> > +   bool blockprotected = false, powerdown = false;
> > +   static const char * const power_down_dev[] = {
> > +      "MX30LF1G28AD",
> > +      "MX30LF2G28AD",
> > +      "MX30LF4G28AD",
> > +   };
> > 
> >     if (nand_is_slc(chip))
> >        chip->options |= NAND_BBM_FIRSTPAGE | NAND_BBM_SECONDPAGE;
> > @@ -153,6 +208,14 @@ static int macronix_nand_init(struct nand_chip 
*chip)
> > 
> >     macronix_nand_onfi_init(chip);
> > 
> > +   for (i = 0; i < ARRAY_SIZE(power_down_dev); i++) {
> > +      if (!strcmp(power_down_dev[i], chip->parameters.model)) {
> > +         blockprotected = true;
> > +         powerdown = true;
> > +         break;
> > +      }
> > +   }
> > +
> >     if (blockprotected) {
> >        bitmap_set(chip->parameters.set_feature_list,
> >              ONFI_FEATURE_ADDR_MXIC_PROTECTION, 1);
> > @@ -163,6 +226,11 @@ static int macronix_nand_init(struct nand_chip 
*chip)
> >        chip->_unlock = mxic_nand_unlock;
> >     }
> > 
> > +   if (powerdown) {
> > +      chip->_suspend = mxic_nand_suspend;
> > +      chip->_resume = mxic_nand_resume;
> > +   }
> 
> See my comment on patch 2.

ok, got it.

thanks for your time & comments.
Mason


CONFIDENTIALITY NOTE:

This e-mail and any attachments may contain confidential information 
and/or personal data, which is protected by applicable laws. Please be 
reminded that duplication, disclosure, distribution, or use of this e-mail 
(and/or its attachments) or any part thereof is prohibited. If you receive 
this e-mail in error, please notify us immediately and delete this mail as 
well as its attachment(s) from your system. In addition, please be 
informed that collection, processing, and/or use of personal data is 
prohibited unless expressly permitted by personal data protection laws. 
Thank you for your attention and cooperation.

Macronix International Co., Ltd.

=====================================================================



============================================================================

CONFIDENTIALITY NOTE:

This e-mail and any attachments may contain confidential information and/or personal data, which is protected by applicable laws. Please be reminded that duplication, disclosure, distribution, or use of this e-mail (and/or its attachments) or any part thereof is prohibited. If you receive this e-mail in error, please notify us immediately and delete this mail as well as its attachment(s) from your system. In addition, please be informed that collection, processing, and/or use of personal data is prohibited unless expressly permitted by personal data protection laws. Thank you for your attention and cooperation.

Macronix International Co., Ltd.

=====================================================================