[PATCH v4 4/5] hwmon: (adt7475) Add attenuator bypass support

[Chris Packham]

From: Logan Shaw <logan.shaw@xxxxxxxxxxxxxxxxxxx>

Added support for reading DTS properties to set attenuators on
device probe for the ADT7473, ADT7475, ADT7476, and ADT7490.

Signed-off-by: Logan Shaw <logan.shaw@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
---

Notes:
    Changes in v4:
    - use vendor prefix for new property
    
    Changes in v3:
    - move config2 to struct adt7475_data
    - set_property_bit() new helper function to set/clear bit based on dt
      property value.
    - rename to use load_attenuators()

 drivers/hwmon/adt7475.c | 61 +++++++++++++++++++++++++++++++++++++++--
 1 file changed, 58 insertions(+), 3 deletions(-)

diff --git a/drivers/hwmon/adt7475.c b/drivers/hwmon/adt7475.c
index 01c2eeb02aa9..3649b18359dc 100644
--- a/drivers/hwmon/adt7475.c
+++ b/drivers/hwmon/adt7475.c
@@ -19,6 +19,7 @@
 #include <linux/hwmon-vid.h>
 #include <linux/err.h>
 #include <linux/jiffies.h>
+#include <linux/of.h>
 #include <linux/util_macros.h>
 
 /* Indexes for the sysfs hooks */
@@ -193,6 +194,7 @@ struct adt7475_data {
 	unsigned long measure_updated;
 	bool valid;
 
+	u8 config2;
 	u8 config4;
 	u8 config5;
 	u8 has_voltage;
@@ -1458,6 +1460,55 @@ static int adt7475_update_limits(struct i2c_client *client)
 	return 0;
 }
 
+static int set_property_bit(const struct i2c_client *client, char *property,
+			  u8 *config, u8 bit_index)
+{
+	u32 prop_value = 0;
+	int ret = of_property_read_u32(client->dev.of_node, property,
+					&prop_value);
+
+	if (!ret) {
+		if (prop_value)
+			*config |= (1 << bit_index);
+		else
+			*config &= ~(1 << bit_index);
+	}
+
+	return ret;
+}
+
+static int load_attenuators(const struct i2c_client *client, int chip,
+			    struct adt7475_data *data)
+{
+	int ret;
+
+	if (chip == adt7476 || chip == adt7490) {
+		set_property_bit(client, "adi,bypass-attenuator-in0",
+				 &data->config4, 4);
+		set_property_bit(client, "adi,bypass-attenuator-in1",
+				 &data->config4, 5);
+		set_property_bit(client, "adi,bypass-attenuator-in3",
+				 &data->config4, 6);
+		set_property_bit(client, "adi,bypass-attenuator-in4",
+				 &data->config4, 7);
+
+		ret = i2c_smbus_write_byte_data(client, REG_CONFIG4,
+						data->config4);
+		if (ret < 0)
+			return ret;
+	} else if (chip == adt7473 || chip == adt7475) {
+		set_property_bit(client, "adi,bypass-attenuator-in1",
+				 &data->config2, 5);
+
+		ret = i2c_smbus_write_byte_data(client, REG_CONFIG2,
+						data->config2);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
 static int adt7475_probe(struct i2c_client *client,
 			 const struct i2c_device_id *id)
 {
@@ -1472,7 +1523,7 @@ static int adt7475_probe(struct i2c_client *client,
 	struct adt7475_data *data;
 	struct device *hwmon_dev;
 	int i, ret = 0, revision, group_num = 0;
-	u8 config2, config3;
+	u8 config3;
 
 	data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL);
 	if (data == NULL)
@@ -1546,8 +1597,12 @@ static int adt7475_probe(struct i2c_client *client,
 	}
 
 	/* Voltage attenuators can be bypassed, globally or individually */
-	config2 = adt7475_read(REG_CONFIG2);
-	if (config2 & CONFIG2_ATTN) {
+	data->config2 = adt7475_read(REG_CONFIG2);
+	ret = load_attenuators(client, chip, data);
+	if (ret)
+		dev_err(&client->dev, "Error configuring attenuator bypass\n");
+
+	if (data->config2 & CONFIG2_ATTN) {
 		data->bypass_attn = (0x3 << 3) | 0x3;
 	} else {
 		data->bypass_attn = ((data->config4 & CONFIG4_ATTN_IN10) >> 4) |
-- 
2.25.0