Re: [PATCH v2] PCI: qcom: Fix the fixup of PCI_VENDOR_ID_QCOM

[Lorenzo Pieralisi]

On Mon, Dec 30, 2019 at 09:25:28PM +0100, Marc Gonzalez wrote:
> On 29/12/2019 03:45, Bjorn Andersson wrote:
> 
> > On Sat 28 Dec 07:41 PST 2019, Marc Gonzalez wrote:
> > 
> >> On 27/12/2019 09:51, Stanimir Varbanov wrote:
> >>
> >>> On 12/27/19 3:27 AM, Bjorn Andersson wrote:
> >>>
> >>>> There exists non-bridge PCIe devices with PCI_VENDOR_ID_QCOM, so limit
> >>>> the fixup to only affect the relevant PCIe bridges.
> >>>>
> >>>> Cc: stable@xxxxxxxxxxxxxxx
> >>>> Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> >>>> ---
> >>>>
> >>>> Stan, I picked up all the suggested device id's from the previous thread and
> >>>> added 0x1000 for QCS404. I looked at creating platform specific defines in
> >>>> pci_ids.h, but SDM845 has both 106 and 107... Please let me know if you would
> >>>> prefer that I do this anyway.
> >>>
> >>> Looks good,
> >>>
> >>> Acked-by: Stanimir Varbanov <svarbanov@xxxxxxxxxx>
> >>>
> >>>>  drivers/pci/controller/dwc/pcie-qcom.c | 8 +++++++-
> >>>>  1 file changed, 7 insertions(+), 1 deletion(-)
> >>>>
> >>>> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
> >>>> index 5ea527a6bd9f..138e1a2d21cc 100644
> >>>> --- a/drivers/pci/controller/dwc/pcie-qcom.c
> >>>> +++ b/drivers/pci/controller/dwc/pcie-qcom.c
> >>>> @@ -1439,7 +1439,13 @@ static void qcom_fixup_class(struct pci_dev *dev)
> >>>>  {
> >>>>  	dev->class = PCI_CLASS_BRIDGE_PCI << 8;
> >>>>  }
> >>>> -DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, PCI_ANY_ID, qcom_fixup_class);
> >>>> +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0101, qcom_fixup_class);
> >>>> +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0104, qcom_fixup_class);
> >>>> +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0106, qcom_fixup_class);
> >>>> +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0107, qcom_fixup_class);
> >>>> +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x0302, qcom_fixup_class);
> >>>> +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x1000, qcom_fixup_class);
> >>>> +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_QCOM, 0x1001, qcom_fixup_class);
> >>
> >> Hrmmm... still not CCed on the patch,
> > 
> > You are Cc'ed on the patch, but as usual your mail server responds "451
> > too many errors from your ip" and throw my emails away.
> > 
> >> and still don't think the fixup is required(?) for 0x106 and 0x107.
> >>
> > 
> > I re-read your reply in my v1 thread. So we know that 0x104 doesn't need
> > the fixup, so presumably only 0x101 needs the fixup?
> 
> I apologize for the tone of my reply. I did not mean to sound
> so snarky.
> 
> All I can say is that, if I remember correctly, the fixup was
> not necessary on apq8098 (0x0105) and it was probably not
> required on msm8996 and sdm845. For older platforms, all bets
> are off.

How are we proceeding with this patch then ?

Thanks,
Lorenzo