Re: [PATCH v1 1/2] clk: composite: Fix handling of high clock rates

[Christopher Obbard]

Hi Sebastian,

On Fri, 2023-05-19 at 21:05 +0200, Sebastian Reichel wrote:
> ULONG_MAX is used by a few drivers to figure out the highest available
> clock rate via clk_round_rate(clk, ULONG_MAX). Since abs() takes a
> signed value as input, the current logic effectively calculates with
> ULONG_MAX = -1, which results in the worst parent clock being chosen
> instead of the best one.
> 
> For example on Rockchip RK3588 the eMMC driver tries to figure out
> the highest available clock rate. There are three parent clocks
> available resulting in the following rate diffs with the existing
> logic:
> 
> GPLL:   abs(18446744073709551615 - 1188000000) = 1188000001
> CPLL:   abs(18446744073709551615 - 1500000000) = 1500000001
> XIN24M: abs(18446744073709551615 -   24000000) =   24000001
> 
> As a result the clock framework will promote a maximum supported
> clock rate of 24 MHz, even though 1.5GHz are possible. With the
> updated logic any casting between signed and unsigned is avoided
> and the numbers look like this instead:
> 
> GPLL:   18446744073709551615 - 1188000000 = 18446744072521551615
> CPLL:   18446744073709551615 - 1500000000 = 18446744072209551615
> XIN24M: 18446744073709551615 -   24000000 = 18446744073685551615
> 
> As a result the parent with the highest acceptable rate is chosen
> instead of the parent clock with the lowest one.
> 
> Cc: stable@xxxxxxxxxxxxxxx
> Fixes: 49502408007b ("mmc: sdhci-of-dwcmshc: properly determine max clock on Rockchip")
> Signed-off-by: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>

This patch series fixes the error on Rockchip RK3588 on ROCK 5 Model B.

Tested-by: Christopher Obbard <chris.obbard@xxxxxxxxxxxxx>

> ---
>  drivers/clk/clk-composite.c | 5 ++++-
>  1 file changed, 4 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/clk/clk-composite.c b/drivers/clk/clk-composite.c
> index edfa94641bbf..66759fe28fad 100644
> --- a/drivers/clk/clk-composite.c
> +++ b/drivers/clk/clk-composite.c
> @@ -119,7 +119,10 @@ static int clk_composite_determine_rate(struct clk_hw *hw,
>                         if (ret)
>                                 continue;
>  
> -                       rate_diff = abs(req->rate - tmp_req.rate);
> +                       if (req->rate >= tmp_req.rate)
> +                               rate_diff = req->rate - tmp_req.rate;
> +                       else
> +                               rate_diff = tmp_req.rate - req->rate;
>  
>                         if (!rate_diff || !req->best_parent_hw
>                                        || best_rate_diff > rate_diff) {
> -- 
> 2.39.2
> 
>