Re: [PATCH v2 4/4] arm64: dts: qcom: qdu1000-idp: add SDHCI for emmc

[Komal Bajaj]

On 5/22/2023 3:23 PM, Bhupesh Sharma wrote:
> On Mon, 22 May 2023 at 15:06, Komal Bajaj <quic_kbajaj@xxxxxxxxxxx> wrote:
> > Add sdhci node for emmc in qdu1000-idp.
> >
> > Signed-off-by: Komal Bajaj <quic_kbajaj@xxxxxxxxxxx>
> > ---
> >   arch/arm64/boot/dts/qcom/qdu1000-idp.dts | 23 +++++++++++++++++++++++
> >   1 file changed, 23 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/qdu1000-idp.dts b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts
> > index 9e9fd4b8023e..61d8446a2d55 100644
> > --- a/arch/arm64/boot/dts/qcom/qdu1000-idp.dts
> > +++ b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts
> > @@ -451,3 +451,26 @@
> >   &uart7 {
> >          status = "okay";
> >   };
> > +
> > +&sdhc_1 {
> > +       pinctrl-names = "default", "sleep";
> > +       pinctrl-0 = <&sdc1_on_state>;
> > +       pinctrl-1 = <&sdc1_off_state>;
> > +
> > +       cap-mmc-hw-reset;
> > +       mmc-ddr-1_8v;
> > +       mmc-hs200-1_8v;
> > +       mmc-hs400-1_8v;
> > +       mmc-hs400-enhanced-strobe;
> > +
> > +       non-removable;
> > +       no-sd;
> > +       no-sdio;
> > +
> > +       supports-cqe;
> > +
> > +       vmmc-supply = <&vreg_l10a_2p95>;
> > +       vqmmc-supply = <&vreg_l7a_1p8>;
> > +
> > +       status = "okay";
> > +};
> This node is out of alphabetical order again.
> &uart7 would follow &sdhc_1 and so on...
Sure will change this next version.

Thanks
Komal
> Thanks,
> Bhupesh