Re: [PATCH v4 07/18] dt-bindings: soc: mobileye: add EyeQ5 OLB system controller

[Krzysztof Kozlowski]

On 31/01/2024 17:26, Théo Lebrun wrote:
> Add documentation to describe the "Other Logic Block" syscon.
> 
> Signed-off-by: Théo Lebrun <theo.lebrun@xxxxxxxxxxx>
> ---
>  .../bindings/soc/mobileye/mobileye,eyeq5-olb.yaml  | 89 ++++++++++++++++++++++
>  MAINTAINERS                                        |  1 +
>  2 files changed, 90 insertions(+)
> 

..

> +required:
> +  - compatible
> +  - reg
> +  - '#address-cells'
> +  - '#size-cells'
> +  - ranges
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    soc {
> +      #address-cells = <2>;
> +      #size-cells = <2>;
> +
> +      system-controller@e00000 {
> +        compatible = "mobileye,eyeq5-olb", "syscon", "simple-mfd";
> +        reg = <0x0 0xe00000 0x0 0x400>;
> +        #address-cells = <1>;
> +        #size-cells = <1>;
> +        ranges = <0x0 0x0 0xe00000 0x400>;

If there is going to be any resend:
1. ranges follows reg
2. Use lower-case hex

See DTS coding style.

> +
> +        clocks: clock-controller@2c {
> +          compatible = "mobileye,eyeq5-clk";
> +          reg = <0x02C 0x50>, <0x11C 0x04>;
> +          reg-names = "plls", "ospi";
> +          #clock-cells = <1>;
> +          clocks = <&xtal>;
> +          clock-names = "ref";
> +        };
> +
> +        reset: reset-controller@0 {

0 is before 2c, keep nodes properly ordered.



> +          compatible = "mobileye,eyeq5-reset";
> +          reg = <0x000 0x0C>, <0x200 0x34>, <0x120 0x04>;
> +          reg-names = "d0", "d1", "d2";
> +          #reset-cells = <2>;
> +        };
> +
> +        pinctrl: pinctrl@b0 {
> +          compatible = "mobileye,eyeq5-pinctrl";
> +          reg = <0x0B0 0x30>;

This looks incomplete. Your binding mentions children, so provide at
least one child.

> 

Best regards,
Krzysztof