Re: [RESEND PATCH v6 00/12] arm64: qcom: add and enable SHM Bridge support

[Bartosz Golaszewski]

On Mon, Jan 22, 2024 at 11:22 AM Bartosz Golaszewski <brgl@xxxxxxxx> wrote:
>
> From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
>
> Resending after the merge window. I dropped the first patch which was a
> fix and was picked up last release cycle.
>
> We've established the need for using separate secured memory pools for
> SCM and QSEECOM as well as the upcoming scminvoke driver.
>
> It's also become clear that in order to be future-proof, the new
> allocator must be an abstraction layer of a higher level as the SHM
> Bridge will not be the only memory protection mechanism that we'll see
> upstream. Hence the rename to TrustZone Memory rather than SCM Memory
> allocator.
>
> Also to that end: the new allocator is its own module now and provides a
> Kconfig choice menu for selecting the mode of operation (currently
> default and SHM Bridge).
>
> Tested on sm8550 and sa8775p with the Inline Crypto Engine and
> remoteproc.
>
> v5 -> v6:
> Fixed two issues reported by autobuilders:
> - add a fix for memory leaks in the qseecom driver as the first patch for
>   easier backporting to the v6.6.y branch
> - explicitly cast the bus address stored in a variable of type dma_addr_t
>   to phys_addr_t expected by the genpool API
>
> v4 -> v5:
> - fix the return value from qcom_tzmem_init() if SHM Bridge is not supported
> - remove a comment that's no longer useful
> - collect tags
>
> v3 -> v4:
> - include linux/sizes.h for SZ_X macros
> - use dedicated RCU APIs to dereference radix tree slots
> - fix kerneldocs
> - fix the comment in patch 14/15: it's the hypervisor, not the TrustZone
>   that creates the SHM bridge
>
> v2 -> v3:
> - restore pool management and use separate pools for different users
> - don't use the new allocator in qcom_scm_pas_init_image() as the
>   TrustZone will create an SHM bridge for us here
> - rewrite the entire series again for most part
>
> v1 -> v2:
> - too many changes to list, it's a complete rewrite as explained above
>
> Bartosz Golaszewski (12):
>   firmware: qcom: add a dedicated TrustZone buffer allocator
>   firmware: qcom: scm: enable the TZ mem allocator
>   firmware: qcom: scm: smc: switch to using the SCM allocator
>   firmware: qcom: scm: make qcom_scm_assign_mem() use the TZ allocator
>   firmware: qcom: scm: make qcom_scm_ice_set_key() use the TZ allocator
>   firmware: qcom: scm: make qcom_scm_lmh_dcvsh() use the TZ allocator
>   firmware: qcom: scm: make qcom_scm_qseecom_app_get_id() use the TZ
>     allocator
>   firmware: qcom: qseecom: convert to using the TZ allocator
>   firmware: qcom: scm: add support for SHM bridge operations
>   firmware: qcom: tzmem: enable SHM Bridge support
>   firmware: qcom: scm: clarify the comment in qcom_scm_pas_init_image()
>   arm64: defconfig: enable SHM Bridge support for the TZ memory
>     allocator
>
>  MAINTAINERS                                   |   8 +
>  arch/arm64/configs/defconfig                  |   1 +
>  drivers/firmware/qcom/Kconfig                 |  30 ++
>  drivers/firmware/qcom/Makefile                |   1 +
>  .../firmware/qcom/qcom_qseecom_uefisecapp.c   | 281 +++++---------
>  drivers/firmware/qcom/qcom_scm-smc.c          |  30 +-
>  drivers/firmware/qcom/qcom_scm.c              | 179 +++++----
>  drivers/firmware/qcom/qcom_scm.h              |   6 +
>  drivers/firmware/qcom/qcom_tzmem.c            | 365 ++++++++++++++++++
>  drivers/firmware/qcom/qcom_tzmem.h            |  13 +
>  include/linux/firmware/qcom/qcom_qseecom.h    |   4 +-
>  include/linux/firmware/qcom/qcom_scm.h        |   6 +
>  include/linux/firmware/qcom/qcom_tzmem.h      |  28 ++
>  13 files changed, 684 insertions(+), 268 deletions(-)
>  create mode 100644 drivers/firmware/qcom/qcom_tzmem.c
>  create mode 100644 drivers/firmware/qcom/qcom_tzmem.h
>  create mode 100644 include/linux/firmware/qcom/qcom_tzmem.h
>
> --
> 2.40.1
>

Bjorn,

I tested it on db410c as well so let me gently ping you about picking
it up into your tree.

Bartosz