RE: [PATCH v3 1/6] arm64: dts: ti: k3-j784s4: Add Wave5 Video Encoder/Decoder Node

[Brnich, Brandon]

Hi Andrew,

> -----Original Message-----
> From: Davis, Andrew <afd@xxxxxx>
> Sent: Thursday, February 1, 2024 12:35 PM
> To: Brnich, Brandon <b-brnich@xxxxxx>; Menon, Nishanth <nm@xxxxxx>;
> Raghavendra, Vignesh <vigneshr@xxxxxx>; Tero Kristo <kristo@xxxxxxxxxx>;
> Rob Herring <robh+dt@xxxxxxxxxx>; Krzysztof Kozlowski
> <krzysztof.kozlowski+dt@xxxxxxxxxx>; Conor Dooley <conor+dt@xxxxxxxxxx>;
> Catalin Marinas <catalin.marinas@xxxxxxx>; Will Deacon
> <will@xxxxxxxxxx>; Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>; Geert
> Uytterhoeven <geert+renesas@xxxxxxxxx>; Arnd Bergmann
> <arnd@xxxxxxxx>; Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>; Neil
> Armstrong <neil.armstrong@xxxxxxxxxx>; Nícolas F . R . A . Prado
> <nfraprado@xxxxxxxxxxxxx>; Marek Szyprowski
> <m.szyprowski@xxxxxxxxxxx>; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx;
> devicetree@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; Etheridge, Darren
> <detheridge@xxxxxx>
> Subject: Re: [PATCH v3 1/6] arm64: dts: ti: k3-j784s4: Add Wave5 Video
> Encoder/Decoder Node
> 
> On 1/31/24 3:26 PM, Brandon Brnich wrote:
> > This patch adds support for the Wave521cl on the J784S4-evm.
> >
> > Signed-off-by: Brandon Brnich <b-brnich@xxxxxx>
> > ---
> >   arch/arm64/boot/dts/ti/k3-j784s4-evm.dts   |  8 ++++++++
> >   arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi | 20 ++++++++++++++++++++
> >   arch/arm64/boot/dts/ti/k3-j784s4.dtsi      |  2 ++
> >   3 files changed, 30 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
> > b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
> > index f34b92acc56d..7d37c11b4df4 100644
> > --- a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
> > +++ b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
> > @@ -784,6 +784,14 @@ &main_gpio0 {
> >   	status = "okay";
> >   };
> >
> > +&vpu0 {
> > +	status = "okay";
> > +};
> > +
> > +&vpu1 {
> > +	status = "okay";
> > +};
> > +
> >   &mcu_cpsw {
> >   	status = "okay";
> >   	pinctrl-names = "default";
> > diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
> > b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
> > index f2b720ed1e4f..8b2623ac8160 100644
> > --- a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
> > +++ b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
> > @@ -662,6 +662,26 @@ main_i2c6: i2c@2060000 {
> >   		status = "disabled";
> >   	};
> >
> > +	vpu0: video-codec@4210000 {
> > +		compatible = "ti,j721s2-wave521c", "cnm,wave521c";
> > +		reg = <0x00 0x4210000 0x00 0x10000>;
> > +		interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
> > +		clocks = <&k3_clks 241 2>;
> > +		clock-names = "vcodec";
> > +		power-domains = <&k3_pds 241 TI_SCI_PD_EXCLUSIVE>;
> > +		status = "disabled";
> 
> Why are these default disabled? I don't see anything missing that would
> need to be added at the board level. You disable them just to re-enable them
> in the next patch. Leave these default enabled.

I thought that disabled by default was the standard for node in dtsi files, where
they get specifically enabled in the particular dts file for the SoC.

In V4 I will remove the disabled by default. Should this apply to all platforms in
the series?
 
> > +	};
> > +
> > +	vpu1: video-codec@4220000 {
> > +		compatible = "ti,j721s2-wave521c", "cnm,wave521c";
> > +		reg = <0x00 0x4220000 0x00 0x10000>;
> > +		interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
> > +		clocks = <&k3_clks 242 2>;
> > +		clock-names = "vcodec";
> > +		power-domains = <&k3_pds 242 TI_SCI_PD_EXCLUSIVE>;
> > +		status = "disabled";
> > +	};
> > +
> >   	main_sdhci0: mmc@4f80000 {
> >   		compatible = "ti,j721e-sdhci-8bit";
> >   		reg = <0x00 0x04f80000 0x00 0x1000>, diff --git
> > a/arch/arm64/boot/dts/ti/k3-j784s4.dtsi
> > b/arch/arm64/boot/dts/ti/k3-j784s4.dtsi
> > index 4398c3a463e1..93bb0cba1b48 100644
> > --- a/arch/arm64/boot/dts/ti/k3-j784s4.dtsi
> > +++ b/arch/arm64/boot/dts/ti/k3-j784s4.dtsi
> > @@ -247,6 +247,8 @@ cbass_main: bus@100000 {
> >   			 <0x00 0x30000000 0x00 0x30000000 0x00
> 0x0c400000>, /* MAIN NAVSS */
> >   			 <0x41 0x00000000 0x41 0x00000000 0x01
> 0x00000000>, /* PCIe1 DAT1 */
> >   			 <0x4e 0x20000000 0x4e 0x20000000 0x00
> 0x00080000>, /* GPU */
> > +			 <0x00 0x04210000 0x00 0x04210000 0x00
> 0x00010000>, /* VPU0 */
> > +			 <0x00 0x04220000 0x00 0x04220000 0x00
> 0x00010000>, /* VPU1 */
> 
> Add these in sorted by memory address order.

Will do in V4 as well.

> 
> Andrew
> 
> >
> >   			 /* MCUSS_WKUP Range */
> >   			 <0x00 0x28380000 0x00 0x28380000 0x00
> 0x03880000>,

Brandon