Re: [PATCH] arm64: dts: qcom: sm8650: Use GIC-ITS for PCIe0 and PCIe1

From: Neil Armstrong
Date: Fri Feb 02 2024 - 03:03:41 EST


On 01/02/2024 20:59, Konrad Dybcio wrote:
On 25.01.2024 17:55, Neil Armstrong wrote:
Both PCIe0 and PCIe1 controllers are capable of signalling the MSIs
received from endpoint devices to the CPU using GIC-ITS MSI controller.
Add support for it.

The GIC-ITS MSI implementation provides an advantage over internal MSI
implementation using Locality-specific Peripheral Interrupts (LPI) that
would allow MSIs to be targeted for each CPU core.

Like SM8450 & SM8550, the IDs are swapped, but works fine on PCIe0 and PCIe1.

WiFi PCIe Device on SM8650-QRD using GIC-ITS:
159: 0 0 0 0 0 0 0 0 ITS-MSI 0 Edge PCIe PME, aerdrv
167: 0 4 0 0 0 0 0 0 ITS-MSI 524288 Edge bhi
168: 0 0 4 0 0 0 0 0 ITS-MSI 524289 Edge mhi
169: 0 0 0 34 0 0 0 0 ITS-MSI 524290 Edge mhi
170: 0 0 0 0 3 0 0 0 ITS-MSI 524291 Edge ce0
171: 0 0 0 0 0 2 0 0 ITS-MSI 524292 Edge ce1
172: 0 0 0 0 0 0 806 0 ITS-MSI 524293 Edge ce2
173: 0 0 0 0 0 0 0 76 ITS-MSI 524294 Edge ce3
174: 0 0 0 0 0 0 0 0 ITS-MSI 524295 Edge ce5
175: 0 13 0 0 0 0 0 0 ITS-MSI 524296 Edge DP_EXT_IRQ
176: 0 0 0 0 0 0 0 0 ITS-MSI 524297 Edge DP_EXT_IRQ

Is it by chance that this one never fired?

Yeah I only associated to an SSID and did a simple iperf, not enough to trigger all MSIs

Neil


(lgtm otherwise)

Konrad